涂层

The results show that in the range of thickness 0. 2 - 0. 5 mm, the thickness of coating had little effect on the self tensile strength, and the testing data have better repetitiveness.

结果表明，在所测量涂层厚度范围内(涂层厚度 0 。2～ 0 。5mm)，涂层厚度对涂层自拉伸强度影响不大，且试验数据重复性好。

Solar collectors for the selective absorption of high-coating the introduction of Germany technology into the market, this new type of titanium-based and quartz-blue coating, a one-time use of ionizing coating process, as opposed to the widespread use of The black chrome plating and black nickel coating, in terms of performance on an unparalleled advantage.

用于太阳能集热器的高选择性吸收体涂层引进德国技术进入市场，这种新型的基于钛基和石英的蓝色涂层，采用了一次性电离涂层工艺，相对于普遍使用的电镀黑铬和黑镍涂层来说，在性能上具有无可比拟的优势。

Solution: test coating adhesion fastness test cells are commonly used for the faoyuan method, first of all prepare Sellotape and grid tools, stubble coating on the cross-grid lines, be careful not to hurt and oilysludge, and then tape adhesion, torn by the tape coating area size on behalf of the coating of curing degree and adhesion.

解决方法：测试涂层附着牢度一般采用划格试验法，首先准备透明胶带以及划网格的工具，茬涂层上划十字交叉网格线，注意不要伤及基材，然后用胶带粘连，被胶带撕下的涂层面积大小代表涂层的固化程度和附着力。

Solution: test coating adhesion fastness test cells are commonly used for the faoyuan method, first of all prepare Sellotape and grid tool that is coated on the cross-grid lines, be careful not to hurt and oilysludge, and then tape adhesion, torn by the tape coating area size on behalf of the coating of curing degree and adhesion.

处置办法：测验考试涂层附着牢度凡是拔取划格测验法，首不后绸缪透明胶带以及划网格的东西，在涂层上划不一字交织网格线，夺目必给伤及基材，然后用胶带粘连，被胶带撕下的涂层背积不小小代表涂层的固化火平和附着力。

A MoSi2 coating on C-103 niobium alloy was prepared by packing cementation, and the microstructures of the oxidized and unoxidized coatings were analyzed by XRD, SEM and EDS techniques. The formation mechanism of the silicide coating was investigated. The results show that the silicide coating is formed by reactive diffusion and the silicification process obeys parabolic relation.

采用包渗法在C-103铌合金基体上制备MoSi2涂层，通过X射线衍射、扫描电镜和能谱分析等手段研究涂层表面、截面形貌以及氧化后涂层结构变化，并分析硅化过程中涂层的形成机理。

The coating can be used in woodware coating material, metal coating material and plastic coating material.

本发明的涂层材料可用于木器涂层材料、金属涂层材料、塑料涂层材料等。

Simple aluminide coating was damaged completely and lost its protective effect.

目前高温防护涂层主要分为三类，扩散型铝化物涂层、MCrAlY 型包覆涂层和热障涂层[1]。

Results show that the alumina formed on the corroded NiCoCrAlY coating is roughness, cracked and incontinuous and many pits was formed on the surface of the coating after the salt-spray test.

试验结果表明：经过盐雾腐蚀的涂层表面的均匀性和完整性均被破坏，涂层表面产生了大量的腐蚀坑；高温循环氧化以后，表面形成的Al2 O3 氧化膜变得粗糙、破碎且不连续，而且氧化膜容易剥落，降低了涂层的高温抗氧化能力，缩短了涂层的使用寿命

Meanwhile, it is also illustrates that the smaller chromium carbides have less restriction to forming thin splats than larger ones, which beneficial to limit the size of pieces removed by impact of the sand particles, and the higher volume fraction of small chromium carbide may effect the erosion through enhancing interlamellar bonding of the splats which leads to increase the erosion resistance of the coating.

揭示了细小碳化物颗粒有利于获得扁平粒子厚度较小的涂层结构，可减小涂层冲蚀磨损过程中每次剥落的体积；较高含量的细小碳化物颗粒有利于提高涂层扁平粒子间的结合，从而提高涂层抗冲蚀磨损性能。

There was an obvious phenomenon of mechanical occlusion on the cold spray coating interface, and the rolled coating had the phenomenon of metallurgical bonding; The structure of cold-sprayed coating is dense. The poriness of the cold-sprayed coating gradually reduce as the coating's thickness increase.

结果 涂层界面形貌的不同反映出两种涂层的结合机理不尽相同，冷喷涂层界面出现明显的机械咬合现象，而轧制涂层以冶金结合为主；冷喷涂层组织致密，孔隙率随着喷涂厚度的增加逐渐降低；冷喷涂层的表面粗糙度高于轧制覆铜板，有必要对其进行一道轧制处理，改善涂层表面平整度。

The labia have now been sutured together almost completely.The drains and the Foley catheter come out at the top.

此刻阴唇已经几乎完全的缝在一起了，排除多余淤血体液的管子和Foley导管从顶端冒出来。

To get the business done, I suggest we split the difference in price.

为了做成这笔生意，我建议我们在价格上大家各让一半。