涂层

On the coated wing case, when the thickness d of dielectric layer is small enough (f=10G, d＜2mm), the coated material wing have a little ability to reduce the backscatter RCS.

然后讨论了吸波介质涂覆翼面的涂层厚度和涂层介质电磁参数对RCS的影响。

Performance comparisons between zinc dust primers and zinc flake primers were studied.

实验结果表明，在阴极保护期，有机涂层系统的电位比无机富锌涂层系统的高。

When weig ht percentage of TiO 2 sol was10%-20%,the coating showed a good hydrophilicity after UV irr adiation for30～60min or sunlight irradiation for2～5hours. The hydrophil ic angle lowered to about 4degree and the surface of coated layer had the featu re of self-cleaning.

在TiO2溶胶质量分数为10%～20%时，该液体在基板上形成的涂层具有很好的超亲水特性，在UV光照射30～60min或阳光照射2～5h后，亲水角可低至4°左右，涂层表面呈现自洁特性。

It shows that under the same conditions, the wear loss of the sample deposited AlTiN was 1.2% of the substrate, and the friction coefficient was 0.007. A significant approach to the mechanism of the properties is discussed with the aid of SEM, EDS and XRD.

结果表明，相同条件下，经沉积AlTiN涂层的试样磨损量仅为基材的1.2%，摩擦系数仅0.007，表现出良好的杭磨损特性；并用SEM、EDS、XRD等，对涂层的生物摩擦磨损性能进行了分析。

The initial results of the new C7 PLUS coating show a distinctively better performance than traditional high performance coatings (TiAlN / AlTiN) currently available in the market.

和目前市场上普遍可以买到的传统的高性能涂层(TiAlN / AlTiN)相比，这种新型的 C7＋涂层的使用效果明显优于它们。

The oxidation of both low and high-activ ity simple and Pt-modified aluminide coatings on nickel base superalloy IN738 h as been studied in static air at 1100℃ up to 1000 h.

研究镍基高温合金的高铝与低铝活度简单涂层和铂改性渗铝涂层在1100℃空气中的氧化行为。

ABSTRACT The oxidation of both low and high-activ ity simple and Pt-modified aluminide coatings on nickel base superalloy IN738 h as been studied in static air at 1100℃ up to 1000 h.

摘 要 研究镍基高温合金的高铝与低铝活度简单涂层和铂改性渗铝涂层在1100℃空气中的氧化行为。

The high-temperature oxidation and degradation behavior were analyzed for the aluminide coating on Co-base superalloy , and the relationship between the oxidation and life has been deduced for the coating.

通过分析钴基超合金外扩散型铝化物涂层的高温氧化及退化行为，并采用近似方法推算，得出了这类涂层氧化和退化与时间的关系。

Ion implantation of 3×10〓/cm〓 Y can slightly shorten the initiation stage, but has no obvious effects on the long period hot corrosion behavior of alloy M41. After corroded for 100 hours at 900 ℃, the gas aluminide coating of alloy M41 didn't initiate accelerated hot corrosion, but the coating has been seriously destroyed.

表面注入剂量为3×10〓／cm〓的Y略微缩短M41合金热腐蚀的孕育期，但对长时间的热腐蚀影响不大。M41合金气相渗铝涂层热腐蚀100h后，没出现加速热腐蚀，但涂层破坏严重。

At 900℃, alloy M41 and K3 display similar isothermal oxidation rates which are lower than the oxidation rates of their aluminide coatings. At 1050℃, alloy M41 has a lower isothermal oxidation rate and better scale adherence than K3, and the oxidation rates of the two alloys are higher than that of their aluminide coatings.

900℃下M41和K3合金的氧化增重近似，都比气相渗铝涂层的小，氧化膜均无明显脱落。1050℃下M41合金的氧化增重小于K3合金，氧化膜脱落较轻，K3合金氧化膜脱落严重；该温度下两合金的氧化增重都大于渗铝涂层。

The labia have now been sutured together almost completely.The drains and the Foley catheter come out at the top.

此刻阴唇已经几乎完全的缝在一起了，排除多余淤血体液的管子和Foley导管从顶端冒出来。

To get the business done, I suggest we split the difference in price.

为了做成这笔生意，我建议我们在价格上大家各让一半。