浸渍

The influence of characteristics of bast fiber growing and degumming strains,especially the external factors on the pulping are also summarized.

简单介绍了果胶的结构、化学组成及生物脱胶机理，详细总结了韧皮纤维酶法和发酵浸渍法脱胶制浆的研究、应用和发展情况，并对影响发酵浸渍法制浆原料和脱胶菌株的特性，特别是脱胶过程中主要外界因子进行了综述。

The structure,composition of pectin and the mechanism of bio-degumming are briefly introduced in this paper,the application,research progress of enzymatic degumming and retting for bast fiber s pulping are particularly summarized.

简单介绍了果胶的结构、化学组成及生物脱胶机理，详细总结了韧皮纤维酶法和发酵浸渍法脱胶制浆的研究、应用和发展情况，并对影响发酵浸渍法制浆原料和脱胶菌株的特性，特别是脱胶过程中主要外界因子进行了综述。

The rates of oxidation loss of graphite electrodes with and without boride impregnation were compared through testing in a simulating furnace.

采用硼化物溶液浸渍石墨电极，测试不同浸渍量的试样在模拟炉中氧化失重率、物理性能及表面形态。

In the present study,the sorption of toxic o cresol by fly ash and impregnated fly ashin aqueous solution has been investigated.

研究了水溶液中粉煤灰和浸渍粉煤灰吸附有害的邻甲酚，试验了颗粒大小、浸渍条件、pH值和温度等因素对吸附量的影响。

A new cermet sinter with through micro-porous structure was developed by vacuum liquid phase sintering method, in which Al2O3-Ni-Cr-Mo-Si-Fe powder was used as the basic material, TiH2 and CaCO3 were used as the composite pore-forming materials and hominess grains was used as dispersal particles. The cermet sinter was then infiltrated with Ag-Cu-Pb-Sn at vacuum and formed a new high temperature self-lubricating material.

以TiH2和CaCO3为复合造孔剂，以硬质微细颗粒为惰性弥散质点，采用真空烧结法制备出具有贯通型微孔结构的Al2O3-Ni-Cr-Mo-Si-Fe系金属陶瓷烧结体，并在烧结体中浸渍Ag-Cu-Pb-Sn系浸渍型固体润滑剂制备出新型高温扩散自润滑材料。

The ideal high temperature nickel activation process parameter as follow: Nickel acetate concentration 70g·L~(-1);Sodium hypophosphite concentration 70 g·L~(-1);Soakage temperature 40℃;Soakage time 5min ;activation time 30min;Activation temperature 170℃.

理想高温镍活化工艺参数为：乙酸镍浓度70g·L~(-1)，次磷酸钠浓度70 g·L~(-1)，浸渍温度40℃，浸渍时间5 min，活化时间30min，活化温度170℃。

The reason and measure for slag buildup on RH immerge tube under current process of Panzhihua Steel have been studied based on experimental analysis and thermodynamic calculation.

针对攀钢现行工艺下发生的RH浸渍管粘渣的问题，通过实验及理论计算研究了RH浸渍管的粘渣原因及其对策。

The utilization ratio of Pt has increased to 99 percent through the optimization of the impregnation step.

还研究了浸渍过程的优化，使浸渍液利用率提高到99％。

Especially on the impregnation process, impregnator was unnecessary.

利用这种工艺，根据制品的形状设计模具，可以制造各种形状的产品，尤其是在浸渍工艺方面，不需要专用的浸渍设备。

The Scandia doped tungsten powders were made by both liquid-solid doping method and liquid-liquid doping method on the basis of previous researches. The study shows that on the basis of improving pressing and sintering process, we can obtain sub-micron porous bodies with proper porosities.

研究表明在改进压制、烧结技术的基础上，可以获得具有适当孔度的亚微米结构多孔基体，氧化钪在基体中的分布得到进一步改善，在这种基体中铝酸盐的浸渍率可以达到常规浸渍阴极的要求。

In the United States, chronic alcoholism and hepatitis C are the most common ones.

在美国，慢性酒精中毒，肝炎是最常见的。

If you have any questions, you can contact me anytime.

如果有任何问题，你可以随时联系我。