泵

Light output analysis tests character of spectrum radiate of pyrotechnic mixtures and analyses wave band distribute of light by comparing different static blaze spectrograms of the pyrotechnic mixtures. Screen out the better pyrotechnic mixtures according to request of pumping source. Press experiments in airtight erupt container experiment, which simulate the circumstance that pyrotechnic mixtures deflagrate in quartz pipe, realize the press influence to the quartz pipe wall and the disciplinarian of axes press variety. Apply these pyrotechnic mixtures to Nd:YAG lasers as the pumping source and compare pumping efficiency of different pyrotechnic mixtures. Pumping efficiency is an important standard which checkout if these pyrotechnic mixtures are the better pumping source. Sensitivity experiment analysis incarnate security of pyrotechnic mixtures that is the essential parameter in the process of design, manufacture and use.

通过对烟火药的热分析(爆热分析、DTA、TG)，了解备选烟火药反应过程中的能量输出特性及反应过程中的物理、化学变化规律；光输出分析实验对烟火药配方光谱辐射特征进行测试，比较其静态火焰光谱图，分析不同烟火药剂光辐射波段分布特征，根据激光泵浦源的辐射要求，进而筛选更符合激光泵浦源药剂要求的烟火药；模拟烟火药在石英管中爆燃环境的密闭爆发器压力分析实验反映了烟火药在石英管中反应时对管壁的压力影响以及管内轴向压力变化规律；将烟火药作为泵浦源应用于Nd：YAG固体激光器，比较不同烟火药的泵浦效率，作为检验烟火药是否适合作为激光泵浦源的重要标准；感度实验分析体现了各种烟火药的安全性，是烟火药设计、制造和使用的必要示性数。

Centrifugal energy saving analysis and measures: 1 improve the efficiency of centrifugal pumps a first step, in the selection of comparison, when many suppliers Selection program, in considering the cost-effective choice as far as possible under the premise of efficient programs; the second step , accredited professionals must Mill producers, affecting the pump efficiency of the key components such as impellers, pump body, pump cover, diversion devices, such as the manufacture of quality producers, especially for the airfoil impeller , outlet angle, leaves the sub-degrees, the shape of flow channel, to control the quality of finish, etc., so that products are delivered in the current production under the conditions of highly efficient products; the third step, the scene in the production of installation and debugging process, pump to ensure a solid foundation, with the driving machine for good, before and after valve flexible piping layout design is reasonable, on-site control is feasible and safe, the complete and accurate monitoring instrumentation to ensure that pump operation can carry out real-time monitoring; fourth step , are at long-term operation of water pumps necessary to pay attention to the equipment inspection and found anomalies reflect real-time reporting, in the normal minor repairs, overhaul cycle, to deal with the replacement of wearing parts inspection to ensure the pump's long-term safe and efficient operation.

第一步，在选型时多比较各供应商的选型方案，在考虑性价比的前提下尽量选用效率高的方案；第二步，派驻一定的专业人员驻厂监制，对影响水泵效率的关键零部件如叶轮、泵体、泵盖、导流器等的制造质量进行监制，尤其对叶轮的翼形、出水角、叶片的分度、流道的形状、光洁度等质量进行控制，使交付的产品是在当前的生产条件下的高效率的产品；第三步，在生产现场的安装调试过程中，要保证泵的基础牢靠，与驱动机对中良好，前后阀门开关灵活，管道布置设计合理，现场控制安全可行，各运行监控仪表齐全准确，保证泵的运行过程能够进行实时监控；第四步，是在水泵的长期运行中要注意对设备的点检，发现异常情况即时反映汇报，在正常的小修、大修周期中，应对各易损件进行检查更换，保证泵的长期高效安全的运行。

This type of pump is to pump into the shell-like shell for very high pressure pump, pump body with single-level pressure to bear, so the use of double-pump body.

这种型式的泵是把泵壳制作成筒体式的，对于压力非常高的泵，用单层泵体难以承受其压力，所以采用双层泵体。

Modern systems consist of one or more computer-controlled metering pumps that can be programmed to vary the ratio of mobile phase components, as is required for gradient chromatography, or to mix isocratic mobile phases (i.e., mobile phases having a fixed ratio of solvents).

泵系统—HPLC 泵系统通过高压管路和设备将储液系统的流动相按设定的流量精确地输送通过柱子，最新的泵系统由一台或更多的计算机测量控制泵使得流动相组分能够按照程序变化改变比例，如有必要，可以进行梯度洗脱或混合均匀的流动相（i.e。，流动相可以是混合比例的溶液），然而，当操作压力达到或高于5000 psi，流速达到10ml/min的典型值时，预混合均匀的流动相各成分的比例就比泵控制的更精确。

Pumping Systems—HPLC pumping systems deliver metered amounts of mobile phase from the solvent reservoirs to the column through high-pressure tubing and fittings. Modern systems consist of one or more computer-controlled metering pumps that can be programmed to vary the ratio of mobile phase components, as is required for gradient chromatography, or to mix isocratic mobile phases (i.e., mobile phases having a fixed ratio of solvents). However, the proportion of ingredients in premixed isocratic mobile phases can be more accurately controlled than in those delivered by most pumping systems. Operating pressures up to 5000 psi or higher, with delivery rates up to about 10 mL per minute are typical.

泵系统—HPLC 泵系统通过高压管路和设备将储液系统的流动相按设定的流量精确地输送通过柱子，最新的泵系统由一台或更多的计算机测量控制泵使得流动相组分能够按照程序变化改变比例，如有必要，可以进行梯度洗脱或混合均匀的流动相（i.e。，流动相可以是混合比例的溶液），然而，当操作压力达到或高于5000 psi，流速达到10ml/min的典型值时，预混合均匀的流动相各成分的比例就比泵控制的更精确。

In order to do research on pipe flow and pump characteristics of polymer flooding and water flooding rod-pumped well in especially high water-cut stage, rheometric test aimed at production stream from polymer flooding and water flooding rod-pumped well in especially high water-cut stage has been made, and the characteristic of production stream in especially high water-cut stage is confirmed as Newtonian fluid. Experiments using different mediums about pipe flow and pump characteristics is made. Frictional resistance and coefficient of friction resistance of annulus fluid between sucker rod and the pipe flow is calculated under different working conditions. Frictional resistance between plunger and pump barrel under different parameters is calculated based on related theory of pump characteristic and the strained analytical model of oil-well pump. Besides, using the theory of slit flow and hydraulic -clamping pressure, the frictional resistance is calculated, and the error between the result and measured value is no more than 13%.

为研究特高含水期水驱及聚驱抽油机井管流特性与泵特性，本文针对特高含水期水驱及聚驱井采出液进行了流变性试验，确定了特高含水期油井采出液的性质属牛顿流体；利用不同介质，进行管流特性与泵特性试验，得到了不同工况下杆、管环空流的摩擦阻力和摩阻系数；根据泵特性相关理论和抽油泵受力分析模型，计算了不同参数下柱塞与泵筒间的摩擦阻力，并利用缝隙流与液压卡紧力理论对柱塞与泵筒间的摩擦阻力进行了计算，计算结果与实测值误差在13%以内。

The paper attempts to design and development a new type of hydraulic pump. It is the design of combining the advantages of sucker rod pump and rodless botttom hole pump, without pumping rod,and depends on the hydraulic system on the ground providing the impetus. The paper uses the pump Swabbing Principle to design the main parts of the pump structure and size, analyses and calculates the up down stroke of the piston and the switching process of pump valve, uses the finite element method to analyse the main force summing element and check intensity, and designs a ground hydraulic control system to match it. Considering the need of deep mining, salvage equipment is designed. The design shows that there is feasible and reliable to realize the exploitation underground using the new hydraulic pump. The design idea in this paper enlightens the rodless botttom hole pump production in the future and other similar issues.

本文尝试一种新型液力泵的设计和开发，它的设计思想是结合有杆泵和无杆泵各自的优点，取消抽油杆，依靠地面液压系统提供动力，本文从抽油泵抽汲原理出发，设计了抽油泵主要部件的结构和尺寸，对上下冲程柱塞的运动规律和泵阀启闭过程进行分析和计算，使用有限元法对主要零件进行了受力分析和强度校核，并设计与之配套使用的地面液压控制系统，考虑深井开采的需要，一并设计了打捞装置，为理论上实现了这种新型液力抽油泵井下开采的可行性和可靠性做了一些基础的工作，本文的设计思路对今后无杆泵采油等类似问题的研究做了有益的尝试。

Over the past few decades,the pipe was humidified and lubricated by mortar and water around all regions of China.The cost is high on the waste materials and vehicles.

使泵机和泵管在润湿的基础上，再使泵管内壁润滑，以减少混凝土泵送时通过管道的摩擦阻力，保证泵送顺利进行。

This removal of air from the pump casing produces a partial vacuum on the pump inlet ,here the fluid is trapped between the teeth of the upper and lower gears and the pump casing .continued rotation of the gears forces the fluid out of the pump discharge .

这种泵内空气运动使泵吸入口处形成了真空，于是外部油箱的液体在大气压的作用下，由泵的入口进入，聚集在上下齿轮和泵壳体之间，齿轮连续的旋转使液体流出泵的出口。

It widely serves as fresh water and seawater cooling pump, burr pump, ballast pump and general pump, and used for seawater desalting device and marine pressure cabinet.

广泛应用于淡水和海水冷却泵、舱底泵、压载泵、消防泵、日常总用泵等。

Breath, muscle contraction of the buttocks; arch body, as far as possible to hold his head, right leg straight towards the ceiling (peg-leg knee in order to avoid muscle tension).

呼气，收缩臀部肌肉；拱起身体，尽量抬起头来，右腿伸直朝向天花板（膝微屈，以避免肌肉紧张）。

The cost of moving grain food products was unchanged from May, but year over year are up 8%.

粮食产品的运输费用与5月份相比没有变化，但却比去年同期高8％。