氯化乙烯

New contributions of this work are as follows:(1). Preparation of Spherical MgCl_2-Supported Late-Transition Metal Catalysts for Ethylene PolymerizationFacile and effective immobilization of late-transition metal catalysts. 2,3-bis-(2,6-diisopropylphenyl) butane diimine nickel dibromide (1) and 2,6-bis-[1-(2,4,6-trimethylphenylimino)ethyl]pyridine iron dichloride (2), for ethylene polymerization has been achieved, using spherical MgCl_2 supports obtained by thermal dealcoholization of MgCl_2·2.56C_2H_5OH, and the effects of dealcoholization temperature on supported late-transition metal catalysts and the properties of resultant polymers were studied, the results indicated that:1.Supports with appropriate mechanical strength, high surface area and high porosity could be prepared by thermal dealcoholization of spherical MgCl_2·2.56C_2H_5OH supports; 2.BET, XRD, IR, SEM, GPC and DSC analyses indicate that the activities of the supported late-transition metal catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature.

本工作的新贡献如下：(1)、球形氯化镁负载后过渡金属催化荆催化乙烯聚合本文将配合物2，3-双(2，6-二异丙基苯亚胺)丁烷二溴化镍(1)和配合物2，6-二[1-(2，4，6-三甲基苯亚胺)乙基]吡啶二氯化铁(2)分别直接负载于经不同热脱醇温度处理的球形氯化镁载体上，研究了氯化镁载体的脱醇温度对负载化后过渡金属催化剂及其聚合物的影响，研究表明：1、通过对球形MgCl_2·2.56C_2H_5OH载体进行热脱醇处理，可以获得合适机械强度、较高比表面积和较高孔隙度的球形氯化镁载体；2、BET，XRD，IR，SEM，GPC和DSC研究表明，脱醇温度极大地影响负载后过渡金属催化剂的活性和聚合物的性能。

New contributions of this work are as follows:(1). Preparation of Spherical MgCl_2-Supported Late-Transition Metal Catalysts for Ethylene Polymerization Facile and effective immobilization of late-transition metal catalysts. 2,3-bis-(2,6-diisopropylphenyl) butane diimine nickel dibromide (1) and 2,6-bis-[1-(2,4,6-trimethylphenylimino)ethyl]pyridine iron dichloride (2), for ethylene polymerization has been achieved, using spherical MgCl_2 supports obtained by thermal dealcoholization of MgCl_2·2.56C_2H_5OH, and the effects of dealcoholization temperature on supported late-transition metal catalysts and the properties of resultant polymers were studied, the results indicated that: 1.Supports with appropriate mechanical strength, high surface area and high porosity could be prepared by thermal dealcoholization of spherical MgCl_2·2.56C_2H_5OH supports; 2.BET, XRD, IR, SEM, GPC and DSC analyses indicate that the activities of the supported late-transition metal catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature.

本工作的新贡献如下：(1)、球形氯化镁负载后过渡金属催化荆催化乙烯聚合本文将配合物2，3-双(2，6-二异丙基苯亚胺)丁烷二溴化镍(1)和配合物2，6-二[1-(2，4，6-三甲基苯亚胺)乙基]吡啶二氯化铁(2)分别直接负载于经不同热脱醇温度处理的球形氯化镁载体上，研究了氯化镁载体的脱醇温度对负载化后过渡金属催化剂及其聚合物的影响，研究表明： 1、通过对球形MgCl_2·2.56C_2H_5OH载体进行热脱醇处理，可以获得合适机械强度、较高比表面积和较高孔隙度的球形氯化镁载体； 2、BET，XRD，IR，SEM，GPC和DSC研究表明，脱醇温度极大地影响负载后过渡金属催化剂的活性和聚合物的性能。

Fter preparing porous thin film by doctor blade, carbon counter electrode was prepared by sintering porous thin film at low-temperature.

bstract 以廉价的炭黑掺杂石墨粉，氯化聚乙酸乙烯醋为胶黏剂制成导电浆料，在柔性基底上用丝网印刷技术制备薄膜，低温热处理后即得碳对电极。

Uses: Suitable for gas adsorption, the decolorization and refining of catalyst carriers and monosodium glutamate, citric acid and oil; used in catalyst of phosgene synthesis; as catalyst carrier for high mercury chloride, vinyl acetate synthesis, etc.

用途： 适用于气相吸附，催化剂载体和味精、柠檬酸、油类的脱色、精制以及光气合成用的触媒、氯化高汞、醋酸乙烯等合成工艺的触媒载体。

Study on the polymerization of 4 vinylpyridine was carried out with propionamide complex of neodymium chloride.

对氯化钕丙酰胺配合物与烷基铝组成的二元体系催化 4 乙烯吡啶极性单体聚合反应进行了研究，考察影响聚合反应的各种因素。

An intermediate template route was developed to grow cubic silicon carbide nanorods at relatively low temperature of 600~700℃ using tetrachloroethylene (C2Cl4) and silicon tetrachloride (SiCl4) as carbon and silicon sources, respectively by a solvothermal method.

采用中间模板路线在600~700℃相对低的温度下，用四氯乙烯和四氯化硅作为原材料，用溶剂热的方法合成了立方相的碳化硅纳米棒。

The synthesis of poly{2-4-[bi(4-tetrabutylphenylamino]phenylphenylenenvinylene} was beginwith 4-tetrabutylbenzoic,through acylation、Hoffmann rearrangement、bromization、idionization、Ullmann reaction、bromization、condensepolymerization.

聚{2-[4-二(4-叔丁基苯胺基苯基]苯撑乙烯}是以对叔丁基苯甲酸为原料，经酰氯化、酰胺化、Hoffmann降解、碘化、Ullmann反应、溴化、缩聚反应得到。

Wedgeplug O-Seal plug valves with their positive, no-leak features are not only recommended as the best general purpose valves for handling hydrocarbons, vegetable oils, solvents, etc., but are ideal for such tough service as butane, propane, butadiene, acetone, ethyl alcohol, ammonia, anhydrous ammonia, benzene, vinyl chloride, dry chlorine, Dowtherm, ethane, ethylene, hydrogen chloride, napthalene, oxygen, hydrogen, phthalic anhydride, dry phosgene, phosphoric acid, potassium carbonate, styrene, molten sulphur, sulphur dichloride and related services within a temperature range from -300oF to + 450oF within pressure limits of the valves.

楔塞O形密封旋塞阀具有积极的、无泄漏特性，不但是最好的通用的阀门，用于处理碳化氢，植物油，溶剂等，还特别适用于严酷的应用环境，如丁烷，丙烷，丁二烯，丙酮，乙醇，氨，无水氨，苯，氯乙烯，干氯，道氏热载体，乙烷，乙烯，氯化氢，萘，氧，氢，邻苯二甲酸酐，干碳酰氯，磷酸，碳酸钾，苯乙烯，融化硫，二氯化硫，以及温度在-184oC至232oC之间，压力在阀门额定压力等级范围内的有关应用。

Indium Tin Oxide nano-powder was prepared with a convenient solvent thermal method. A hydroxide precursor was first prepared from indium chloride and tin chloride by using ammonia as precipitating agent.

以氯化铟和氯化锡为原料，氨水为沉淀剂，先用化学沉淀法制备了前驱体，然后将该前驱体以乙二醇为溶剂在聚四氟乙烯内衬的反应釜中于低至190 ℃下反应，获得了铟锡氧化物纳米粉体。

The application of clean process to the production of chlorinated polyvinyl chloride

以过氯乙烯氯化液为原料，研究了氯化液喷雾脱挥工艺，取得了良好的效果。

For a big chunk of credit-card losses; the number of filings (and thus charge-off rates) would be rising again, whether

年美国个人破产法的一个改动使得破产登记急速下降，而后引起了信用卡大规模的亏损。

Eph. 4:23 And that you be renewed in the spirit of your mind

弗四23 而在你们心思的灵里得以更新