氮化

The nitrogenation process, reaction details under different nitrogenation conditions and the magnetic properties of products are also studied by using the differential thermal analysis, X-ray diffraction spectra, M〓ssbauer effect and vibrating sample magnetometer.

用DTA、X-射线结构分析、穆斯堡尔谱分析等手段研究了不同氮化条件下的氮化规律和反应细节。

Most manufacturers use frequency induction hardening process, after the nitrogenation or chromeplating, nitrogenation of thickness of 0.5 to 2.7 0.6 ㎜, chrome-plated layer thickness ㎜ 0.10 ~ 0.15, mainstream technology for after the chromeplating frequency induction hardening.

目前多数厂家采用复合处理，中频淬火后进行氮化或镀铬，氮化层厚度为0.5～0.6㎜，镀铬层厚度为0.10～0.15㎜，主流工艺为中频淬火后镀铬。

Using silicon and metallic iron,α-Si_3N_4 olivary microparticles with a diameter of about 300～500 nm have been obtained at 650℃.When silicon and metallic aluminium were used to react with ammonium chloride,α-Si_3N_4 nanowire bundles with diameter of about 8 nm can be also obtained at 600℃.Since all of the starting materials used are relatively cheap,the methods will have potential prospect in industrial application.3.Graphite-like carbon nitride nanowire bundles with diameters of 200-500 nm were synthesized from the solid state thermolysis of melamine at relatively low temperature(400℃).

相关研究工作的成果发表在International journal of applied ceramicstechnology.2、以廉价的硅铁合金和氯化铵为原料，在600℃合成了α相的氮化硅纳米线束，单根纳米线直径8 nm，长达800 nm，考察了反应温度和反应时间对产物纯度和形貌的影响；以硅粉和铁粉为原料合成了纯度良好，直径为150～500 nm的α-Si_3N_4亚微粒子；以硅粉和铝粉为原料在400-600℃合成了直径为10 nm左右的α相氮化硅纳米线束。

The properties such as high hardness,low friction coefficient,excellent wearability and photics properties,can provide the profound foundation for the application of carbon nitride materials in many fields.

许多研究小组已经合成出具有独特性能的氮化碳，其高硬度、低摩擦系数、良好的耐磨性、较好的光学性质等对氮化碳在广阔领域里的应用提供了坚实的基础。

For airbridge fabrication, tungsten nitride was chosen as the diffusion barrier for copper-airbridged pseudomorphic high electron mobility transistor due to its compatibility with the conventional airbridge process.

在本实验中，空气桥制作上使用氮化钨作为铜导线高电子迁移率电晶体之扩散障碍层，这是由於氮化钨和传统制程上有高度的相容性。

The reaction can be carried out in a non-aqueous solution and 4-aminopyridine can be diazotized with this method.

这个方法表现出如下优点：1），整个重氮化与偶联反应均在非水溶剂中进行；2），改变原料不同投料比，可以分别得到含有一，二，四偶联产物为主的反应产物；3），可以合成在酸性水溶液中不易重氮化的4-氨基吡啶的偶氮化合物。

The results show that a certain degree of increase of SiC content was helpful for nitrification of TiSi2, and SiC particles were nitrified during the SHS p.

结果表明：SiC在一定范围内增加有利于TiSi2的氮化，且含40%SiC和50％SiC的压坯在燃烧合成过程中发生了SiC的氮化反应。

The results show that a certain degree of increase of SiC content was helpful for nitrification of TiSi2, and SiC particles were nitrified during the SHS process in the samples of green compacts with 40% SiC and 50% SiC diluent.

结果表明：SiC在一定范围内增加有利于TiSi2的氮化，且含40％SiC和50％SIC的压坯在燃烧合成过程中发生了SiC的氮化反应。

The results of catalytic performance showed that chromium oxide has certain ammonia decomposition activity.

将氧化铬材料用于氨分解反应，发现氧化铬具有一定的氨解活性，在氨分解过程中，催化剂的组成发生了变化，氧化物部分氮化，氨解性能并没有明显的变化，表明氮化铬是氨解反应的活性中心。

When used in superabrasive grits synthesizing, especially in the case of cubic boron nitride, the consumption of anvils can be decreased effectively; and the quality and yield of CBN can he improved.

在超硬材料合成中，尤其是立方氮化硼合成中，能有效降低锤耗，同时可提高立方氮化硼的合成品质及产量；超硬材料表面镀钛及钛合金后，能实现镀层和结合剂的冶金结合，工具寿命提高30%以上；钛对许多氧化物质和还原物质具有极好的耐腐蚀性，适用于人造金刚石的批量电解提纯工序。

However, as the name（read－only memory）implies, CD disks cannot be written onorchanged in any way.

然而，正如其名字所指出的那样，CD盘不能写，也不能用任何方式改变其内容。

Galvanizes steel pallet is mainly export which suits standard packing of European Union, the North America. galvanizes steel pallet is suitable to heavy rack. Pallet surface can design plate type, corrugated and the gap form, satisfies the different requirements.

镀锌钢托盘多用于出口，替代木托盘，免薰蒸，符合欧盟、北美各国对出口货物包装材料的法令要求；喷涂钢托盘适用于重载上货架之用，托盘表面根据需要制作成平板状、波纹状及间隔形式，满足不同的使用要求。