树脂的
- 与 树脂的 相关的网络例句 [注:此内容来源于网络,仅供参考]
-
The key technology of "fattyacid-oil process" in production of alkyd resin is the alcoholysis of oils. The alcoholysis of fattyacid-oil is the result of esterification of fatty acid and alloholysis of oils, of which the medium effect of esterified product of fatty acid and polyols will promote the alcoholysis of oils with polyols.
制造醇酸树脂的"脂肪酸-油法"的技术关键依然是油脂的醇解,整个脂肪酸-油脂体系的醇解是脂肪酸酯化与油脂醇解并行反应的结果,其中,脂肪酸与多元醇的酯化产物的介质效应有力地促进了油脂与多元醇的醇解反应。
-
Crystallized sulfuric salt of SAM was obtained by centrifuging the precipitant at 3000 rpm after adding six times the volume of absolute methanol to the decolorant liquid with a final step of freezing evaporation.
确定了分离纯化SAM的最优条件是:在pH值5.0时,含SAM浓度为3.0 g/L的上柱液,以6 L/h的流速,过装填D152树脂的离子交换柱(φ50 mm×1500 mm)后以去离子水和醋酸洗脱除杂,再用9 L到15 L浓度为50 mmol/L的硫酸以6 L/h的流速洗脱,可以分离得到纯度较高的SAM粗品。
-
The microporosity of the resin prepared by the invention achieves 60-95%; the micro-hole has uniform distribution and has obvious single peak characteristic and obvious separation effect on the organic matters with identical chemical structure type and different molecule sizes, and can be effectively used for disposing and recycling corresponding organic wastewater.
由本发明制备得到的这种树脂的微孔率达到60~95%,孔分布均匀,具有明显的单高峰特征,对于化学结构类别相同而分子尺寸不同的有机物有明显的分离作用,可有效的用于处理并资源化相关有机废水。
-
The experimental results show that the content of SiC in RBSC increases with carbon content while α-SiC is chosen as a filler. However, the residual carbon would appear in specimens when the carbon content exceeds 30% by weight. Using carbon felt, the reaction-formed SiC particles are small and uniform in size and distribution. However, when carbon felt is impregnated with phenol resin, the reaction-formed SiC is nonuniform in size and distribution. X-ray diffraction shows that the fabricated RBSC is composed of α-SiC,β-SiC, and free Si. The polytype of SiC is related to the reaction-heat during sintering.
结果表明:选用α-SiC+C粉的混合物作为生坯,SiC相的体积分数随生坯中wC的增加而增加,但过大的wC将使硅化后的试样出现残碳;选用碳毡作为生坯,反应烧结碳化硅的显微组织特点是C/Si反应生成的碳化硅颗粒均匀细小,并呈线状分布在游离硅中;浸渍过树脂的碳毡硅化处理后的显微组织特点是反应生成的碳化硅颗粒粗大且呈不均匀分布。X射线衍射结果也表明,反应烧结碳化硅陶瓷由游离Si、α-SiC、β-SiC组成,试样中不同晶型碳化硅的出现与C/Si反应的放热过程有关。
-
Aureus secretor strain in a media containing vegetarian amino acids or peptides instead of animal peptides, harvesting the Protein A-containing media and purifying the Protein A by applying it to a synthetic resin that lacks animal peptides and filtering the elutant from the resin.
本发明涉及制备没有动物源产物污染的蛋白A的方法,其包括通过在含有植物氨基酸或肽代替动物肽的培养基中发酵金黄色葡萄球菌分泌菌株,收集含有蛋白A的培养基和纯化蛋白A,并且将其施加到没有动物肽的合成树脂上和过滤来自树脂的洗脱液。
-
The results show that proper control of additive, flocculating agent, temperature, stir speed, quantity of each agent and other process parameters could effectively remove the impurities in the coagulation bath such as the solid, big molecules in the forms of undissolved colloid and semi-colloid. The sizes of flocculates are big and loose, ready to precipitate, therefore the impurity removing effect is very ideal, greatly improving the exchange ability of the ion exchange resin in the subsequent process.
研究结果表明在选用合适的添加剂与絮凝剂,适当控制絮凝的温度、搅拌速度、各试剂的添加量和添加顺序等相关工艺参数的条件下,凝固浴中的絮状固体杂质、以未溶解的胶态和半胶态形式存在的大分子性杂质等都被去除,絮凝物块大而疏松,沉降迅速,除杂纯化效果非常理想,大大提高了后续处理工艺中阴阳离子交换树脂的处理能力。
-
This paper also studied pyrogenation of composites which are made up of three polymer(polyvinylchloride,ethylene-vinyl acetate copolymer and nylon12) and the shell at different temperature through analysed pyrolysis mechanism.The study shows:the calcined shell has different effect on resin at different temperature, nylon 12 having amido and shell calcined for two hours at 600℃ can form the material which has resemblance in the structure of shell,so the pyrolysis speed of this composite is slower than pure nylonl2,but the effect is unideal.
通过分析聚合物的热降解机理,研究了三种聚合物(聚氯乙稀、乙烯—醋酸乙烯共聚物和尼龙12)与不同温度下贝壳组成的复合材料的热降解行为,结果发现:不同温度下煅烧的贝壳对树脂的影响不同,其中具有氨基的尼龙12与600℃煅烧2小时的贝壳可以形成类似贝壳结构的材料,所以这种复合材料比纯尼龙12的热降解速度慢,但效果不理想。
-
Exclusion is to:(1) be in the dry and reasonable than condensend envirogluvtm;(2) high-profile sites or dot part alleviate projecting;(3) filter innovativeink 15 ~ 25 μm;(4) in the business card printing and membership card production side out in the original paper, plastic substrate or dividingone;(5) in adding condensend innovativeink innovativeink cocatalyst of dilution in order to improve the flow of ink;(6) or buyang to speed up the drying oil;(7) solvent dye inks should reduce resin content; to reduce ink quantity, or add to slow down the envirogluvtm inhibitors;(9) do not make drying unit on the version of the wind;(10) in innovativeink-RI hexanaphthene TM3 or added.
摈斥的办法是:(1)拔取潮性公道而又较密的油不朱;(2)矮调部位或网点部位增轻印压;(3)从头功滤油不朱15~25μm;(4)在制卡和会员卡制作上不正以原纸、塑料离隔或变换承印物;(5)在密油不朱边补充密释油不朱的助剂,以提矮油不朱的固定率;(6)补增迟潮性油不朱或溶剂;(7)染料型油不朱答裁减树脂的含度;(8)裁减不求不朱度或补充减缓的油不朱抑制剂;(9)必要使潮燥安设上的风吹到版上;(10)在油不朱边补充TM3或硅油。
-
The results of the TG and DTG curves show that, in the whole intumescing process, APP, PER and MEL cooperate with each other and synergism is generated; The kind of base resin and its contents, the ratio of the component of fire retardant system and their contents all have great influence on the thermal degradation behaviors of fire retardant coating; The concentration of oxygen has no influence on the thermal degradation of fire retardant coating below 345℃, while the influence can not be neglected above 345℃, but compare with the factors mentioned previously, the influence is small.
研究表明,聚磷酸铵-三聚氰胺-季戊四醇三者能密切配合,对阻燃起到协同作用;基料树脂的种类及含量、阻燃体系配比及含量对防火涂料的热分解行为有较大的影响;氧气浓度在低温阶段(345℃以前)对热解行为几乎没影响,而在高温阶段(345℃以后)则对热解行为有影响,但相对于前面的因素对热解的影响来说,氧气浓度对防火涂料的热解行为影响较小。
-
The results showed that,by using 2~4 phr C5 petroleum resin,the adhesion strength of TPI/NR blend improved,the heat build-up decreased,and the physical properties and thermal aging property were better,the TPI/NR blend with this formulation could be an ideal compound of TBR tire shoulder pad.
结果表明,采用2~4份C5石油树脂的TPI/NR并用胶在保持较好的物理性能和耐热空气老化性能的基础上,混炼胶粘合强度提高,硫化胶生热降低,是一种较为理想的全钢子午线轮胎胎肩垫胶配合。
- 推荐网络例句
-
However, as the name(read-only memory)implies, CD disks cannot be written onorchanged in any way.
然而,正如其名字所指出的那样,CD盘不能写,也不能用任何方式改变其内容。
-
Galvanizes steel pallet is mainly export which suits standard packing of European Union, the North America. galvanizes steel pallet is suitable to heavy rack. Pallet surface can design plate type, corrugated and the gap form, satisfies the different requirements.
镀锌钢托盘多用于出口,替代木托盘,免薰蒸,符合欧盟、北美各国对出口货物包装材料的法令要求;喷涂钢托盘适用于重载上货架之用,托盘表面根据需要制作成平板状、波纹状及间隔形式,满足不同的使用要求。
-
A single payment file can be uploaded from an ERP system to effect all pan-China RMB payments and overseas payments in all currencies.
付款指令文件可从您的 ERP 系统上传到我们的电子银行系统来只是国内及对海外各种币种付款。