条件分布

The experimental results denoted that the finer pearlite along the austenite boundaries in the as-cast Cr30Ni20NRE steel disappeared first under long-term and high-temperature service condition, and that an umber of Cr- richened carbides were formed due to unila-teral carburizing at long-term and high- temperature, consequently causing Ni to concentrate, bulging and calalyzing decomposition of the carburizing gas.

试验结果表明，长期在高温条件下服役，铸态Cr30Ni20NRE耐热钢中沿奥氏体晶界的珠光首先融入奥氏体，长期高温单边渗碳形成大量富铬碳化物，促使镍富集并起泡形成瘤状物，催化含碳气体的分解；表层瘤状物使辐射管表层疏松，表面积扩张，加快了碳向基体的渗入，提供了碳化物持续长大的条件，并引起沿碳化物周边开裂和奥氏体基体严重萎缩；合金元素的重新分布造成主合金元素铬和镍产生两极分化，镍和硅的富集促使石墨化，与侵入的氧形成内部氧化空洞和膨胀疏松，最终导致构件穿孔失效。

The innovations of the thesis have been shown in several aspects as follows: put forward the transfer mechanism model of the landslide thrust on basis of the soil arching theory, and according to the model the formula about how to compute the thrust acting on the pile and the maximum pile spacing have been deduced. Set up the displacement model about the interaction of the pile and landslide, and their relatively displacement can be taken into consideration when computing the pile, thus the limitation of supposing the distribution of landslide thrust has been avoided, at the same time, the applied condition of the model and the computing procedure have been given. Bring forward the improved computing method of the anti-sliding pile with prestressed cable, which has been verified rational and applicable, making the method more perfectly in theory. Through the study on the mechanical model of the foundation beam with prestressed cable, put up the limit design idea of the structure, and the realization procedure of the idea has been given and programmed with the finite element, which leads to a new thinking for the safe and rational design of the foundation beam with prestressed anchor cable.

本论文的创新之处在于，用土拱理论建立了滑坡推力在抗滑桩与坡体之间的传递机制模型，并由此得到了作用于抗滑桩上的滑坡推力计算式以及最大桩间距的确定条件式；建立了抗滑桩与滑坡体相互作用的位移模型，该模型能考虑桩与坡体相互作用过程中二者相对位移的影响，避免了人为假设滑坡推力分布形式的缺陷，给出了其适用条件和计算过程；提出了预应力锚索抗滑桩的改进计算方法，使得预应力锚索抗滑桩的计算理论更加完善，通过实例验证了该方法的适用性和合理性；在预应力锚索地梁力学计算模型研究的基础上，提出了预应力锚索地梁极限状态设计的新思想，给出了该设计方法的实现途径并编制了有限元计算程序，为锚索地梁合理而安全的设计提供了一种新思路。

On the basis of analyzing the geochemical indicators of the biogases of coal-bed gas type found at home and abroad and analyzing the geological conditions of forming these biagases,in comparison with the geological conditions and oil and gas distribution in Langgu Sag and in combination with microbial analogic experimental data,it is proposed that the types of the shallow gas in Langgu Sag should be biogenic transform gas and telogenetic biogas.

文章在对国内、外煤层气型生物气的地化分析数据和形成的地质条件分析的基础上，与廊固凹陷地质条件和油气分布状况相对比，结合微生物模拟实验数据，提出廊固凹陷的浅层天然气类型为生物改造气和后期式生物气，并初步阐明了其形成机制。

The reservoir rock types in the region of interest are grain limestone, algal limestone, cryptite, siltstone, muddy limestone and mudstone. The thesis identified as a result of changes in the deposition causing the heterogeneity in plane, and then the geological oil reserves have been calculated in accordance with the areal heterogeneity.3、Based on the data of core analysis, bore logging, array induction imaging log and FMI, porosity and permeability model were built using regression analysis. Through testing 45 rock samples, a, b, m, n value were obtained and used to calculate single-layer oil saturation value using the Archie formula. According to the theory of laterolog and inductolog, resistivity ratio and cross plot were used to identification effective thickness. Effective thickness was identified delicately in 103 wells. Based on the over work, active porosity and oil saturation was calculated accurately.4、According to observation of 100 pieces of the thin slices, cast thin slices and 383m core in three wells, the chief diagenesis in this area were compaction, cementation, denudation and cataclasis. Cementation and denudation were universally influenced active porosity this area. The intergranular pores, residual pores and secondary pores were formed in thin carbonated reservoir of lacustrine facies.5、The influence of reservoir heterogeneity to reservoir calculation was analyzed systematically using actual data. And the conclusions were as follows:①The principal reason leading to oil distribution unequal is interior structural feature of reservoir in structural hydrocarbon reservoir.

确定了由于沉积微相的变化而导致的平面非均质性，进而在平面上按照平面非均质单元计算了石油地质储量。3、利用岩心分析、常规测井曲线与阵列感应、成像测井资料相结合，分岩性利用回归分析方法建立了储层孔隙度、渗透率模型；通过对45块岩样进行岩电试验，获取了a、b、m、n值，利用阿尔奇公式计算了各单层含油饱和度值；根据侧向电阻率和感应电阻率串并联特性，利用电阻率比值法与常规交会图法相结合重建了有效厚度图版，对全区103口井目的层段进行了有效厚度精细划分，通过以上工作，准确求取了储量计算单元内有效厚度参数、有效孔隙度参数以及含油饱和度参数。4、通过对研究区3口井383m岩心观察，100余块薄片、铸体薄片镜下鉴定得出：油泉子油田上、下油砂山组储层主要成岩作用是压实作用、胶结作用、溶蚀作用和破裂作用，其中溶蚀作用、胶结作用最普遍，这两种作用对有效孔隙度影响最大，以上成岩作用形成了原生粒间孔、粒间残余孔和次生孔隙(如粒间溶孔、粒内溶孔、铸模孔、晶间孔等)为主的薄层湖相碳酸盐岩储层。5、利用实际资料，系统分析了油藏非均质对储量计算的影响，认为：①对于构造油气藏而言，油气藏构造及断裂特征是造成油气分布不均的首要原因，储集条件相同的条件下，构造高部位有利于储存油气，油气在垂向的重力分异体现了油气藏内部构造的不均一特征。

Based on the testing analysis of microcosmic digital image, there are smaller Fissions, higher density and even distribution under high confining pressure than under low one. Microcosmic damage mechanics of rock cracking under high confining pressure and hydraulic pressure is given. Reliable testing basis is offered to analyze further failure and stability of the noncircular cave surrounding rock under high confining pressure and high hydraulic pressure.

通过微观数字图像试验分析发现，高围压条件下大理岩断口裂纹长度小、密度大、分布相对均匀，给出高水压高围压作用下岩石破裂产生的微观损伤力学机理，为进一步分析高围压高内外水压条件下非圆形洞室围岩失稳破坏机理提供了可靠的试验依据。

Chapter one of this text has recommended the foreign insurance to apply financial economy to the products pricing method of insurance company, but these methods have not explained how to determine the fair premium of the multiple-line insurance company .In order to solve many business line insurance company pricing problem, chapter two introduce an very important model in insurance company capital allocation field - MR capital allocation model, through deriving capital allocation formula and simulation analysis indicate MR model allocate multiple- line insurance company capital scientifically. In order to apply MR model to non-life insurance pricing, chapter three will extend MR model to introduce loss 3 and layer P . Since the premise of MR model is a certain market price of loss, the chapter four will use the risk-neutral probability transformation technique to get the market value of loss. Under lognormal distribution, we will use location parameter shift and proportional PH transformation to illuminate the technique. The final chapter combines the prior sections result to deduce out the fair premium formula, and apply it to price the catastrophe insurance.

本文的第一章介绍了国外保险业将财务经济学应用到保险公司产品定价的方法，但是这些方法都没有说明如何确定多业务线保险公司的公平保费；为了解决多业务线保险公司定价问题，第二章引入保险公司资本配置领域非常重要的一个模型—MR资本配置模型，通过推导资本配置公式及模拟分析表明MR模型科学地配置了多业务线公司的资本；为了将MR模型应用到非寿险公司的定价中去第三章扩展了MR模型，引入了损失β和层β的概念：由于MR模型的前提条件是有一个确定的损失市场价值，第四章利用风险中性转化方法获得损失的市场价值，在损失为对数正态分布的条件下，通过位置参数转化和比例危险转化方法给出了实例说明；第五章结合前几章的结果给出非寿险公司公平保费的定价公式，并运用它给出了巨灾保险价格的模拟分析。

Influences of the conditions, such as seed value of randomizer, the form parameter of statistical distributing function m, cell number, stress strain state, if there are weak areas in the center of specimens, limit conditions, random evaluating method of material factor on the elastic-plastic failure process of rock specimen are discussed.

分别研究随机数发生器种子值、统计分布函数的形态参数m、单元数目、应力应变状态、试样中心有无弱区、边界条件、材料参数随机赋值方式等条件对岩石试样弹塑性破裂过程的影响。

In the dissertation, a new stabilization method, equal-density method was adopted to prepare modified asphalts with storage stability at high temperature. In this method, a compound was prepared by premixing polymer and filler, and the compound was mixed with asphalt to prepare Polymer-Modified Asphalt by changing the ratio of polymer and filler. The asphalts with good storage stability were formed with the addition of filler, by regulating the density difference between polymer and asphalt. With identifying the effect of composition factor and the technique conditions on mechanical properties of polymer/filler compound and the molecular distribution of the polymer, identifying the effect of composition factor and the technique conditions on the properties and structure of polymer/filler modified asphalt, Styrene-Butadiene-Styrene copolymer, Low Density PolyEthylene, Styrene-Ethylene-Butadiene-Styrene block copolymer modified asphalts with good storage stability and performance were prepared. Rheological method, gel content analysis and swelling measurement were adopted to elucidate the interaction between the polymer and filler. Filler reduced the difference between the polymer and asphalt with the premixing technique, which led to the improvement of the storage stability of the modified asphalts. The thermo-oxidative aging process of base asphalt and PMA were studied and the effect of antioxidant additives on the base asphalt and PMA were analyzed.

本论文采用等密度方法，即预先混合聚合物与填料制备复合物，复合物在沥青中会吸收油份而溶胀，改变填料的用量从而调节聚合物与沥青的密度差异的方法，制备出高温贮存稳定的改性沥青，并研究了工艺条件和配方因素对聚合物/填料复合物力学和聚合物分子量分布的影响，系统考察了工艺条件和配方因素对聚合物/填料改性沥青性能与形态结构的影响，研制出性能优良、高温贮存稳定的苯乙烯-丁二烯-苯乙烯三嵌段共聚物、氢化SBS、低密度聚乙烯改性沥青，并通过流变学分析方法及凝胶和溶胀测试探讨了聚合物与填料的相互作用，指出经过预混工艺填料改变了聚合物与沥青的密度差异，以此说明聚合物/填料改性沥青高温贮存稳定的原因；研究了基质沥青和聚合物改性沥青热氧老化过程，并分析了抗氧剂对基质沥青及聚合物改性沥青的影响，探讨了抗氧剂提高沥青耐老化性能的原因。

This study also makes orange-pomace bread out of orange pomaces and examines conditioning factors including the amount of orange pomaces added, different pomaces preparation processes, the ways pomaces are added, the particle diameter distribution of pomaces and the amount of water, oil and gluten added, changes of the amount of the yeast; and the time it takes for the flour to be fermented.

新鲜柳橙榨汁后剩余之连皮果渣部分富含膳食纤维，因此本实验将其制成乾燥柳橙果渣粉末，探讨不同制备过程对於柳橙果渣样品的化学组成分及物理性质的影响，并将柳橙果渣用於制作果渣面包，探讨的条件因子包括果渣添加量、不同果渣制备过程、果渣添加方式、果渣粒径分布以及添加水量、油量、面筋量、改变酵母添加量、面团发酵时间，将所制作之果渣面包进行比体积分析与评分，以得到制作高果渣纤维含量面包之最适条件因子，并将最后制作出之柳橙果渣面包进行质地剖面分析测试，探讨其对面包质地以及储藏性的影响。

The article elaborated anything is first static electricity balanced and the static electricity balanced condition as well as under the static electricity equilibrium condition conductor charge distribution situation proof.

文章先论述了什么是静电平衡和静电平衡的条件以及在静电平衡条件下的导体的电荷分布情况的论证。

However, as the name（read－only memory）implies, CD disks cannot be written onorchanged in any way.

然而，正如其名字所指出的那样，CD盘不能写，也不能用任何方式改变其内容。

Galvanizes steel pallet is mainly export which suits standard packing of European Union, the North America. galvanizes steel pallet is suitable to heavy rack. Pallet surface can design plate type, corrugated and the gap form, satisfies the different requirements.

镀锌钢托盘多用于出口，替代木托盘，免薰蒸，符合欧盟、北美各国对出口货物包装材料的法令要求；喷涂钢托盘适用于重载上货架之用，托盘表面根据需要制作成平板状、波纹状及间隔形式，满足不同的使用要求。