曲线

Based on the theories of rheology, Non-Newtonian Fluid Mechanics, petroleum chemistry, crystallography and pipeline technology etc. and sampling Huabei crudes, experimental indexes and programmes are drew out, integrating the oil properties and parameter analysis; in terms of the macro analysis of continuum mechanics, substantial experiments are conducted with HAAKE RS600 rotational rheometer and the rheological equation as well as the viscosity-temperature equation are further developed with tested rhrogramme and viscosity-temperature curve, respectively. Beased on the researches on thixotropic mechanism and thixotropy fluid property, hysteresis loop curve, structure failure and viscosity build-up curve as well as shear stress decrement curve for one type oil are first present in this paper. According to the theoretical researches and testing results, a novel thixotropy equation with τ=τ_∞e~ pattern, which is of hi-accuracy, few parameter and simplicity, is developed. Considering the influence of various parameters on rheological behaviour, depressant adding condition is optimized and experimental evaluation on BEM-5P is conducted, which further unrip its mechanism on the Huabei crude. A corresponding viable pipe transportion programmel is also recommended.

本文基于原油流变学、非牛顿流体力学、石油化学、结晶学、原油管输工艺学等理论，以华北原油为研究对象，结合原油物性及实验影响因素分析，制定出实验研究的评价指标及实验方案；从连续介质力学宏观分析的角度，利用HAAKE RS600高端旋转流变仪开展了大量的室内实验，并运用微观研究方法，测定了油样的流变曲线和粘温曲线，建立了流变方程和粘温方程；通过对触变性机理和触变性流体特征的研究，首次对华北原油测定出滞回环曲线、结构破坏与恢复粘时曲线、剪切应力裂降过程曲线，并在理论研究和实验结果的基础之上，建立了能定量描述含蜡原油剪切应力裂降过程的新型三参数触变模式τ=τ_∞e~b/(t+c，该模型具有精度高、参数少、实验简便且适用性强的特点；通过对含蜡原油流变性的影响因素理论研究，开展了加剂条件优选及BEM-5P降凝剂室内评价实验，进一步揭示了降凝剂对华北原油作用机理，在此基础之上，提出了华北原油管输的可行性方案。

Based on the theories of rheology, Non-Newtonian Fluid Mechanics, petroleum chemistry, crystallography and pipeline technology etc. and sampling Huabei crudes, experimental indexes and programmes are drew out, integrating the oil properties and parameter analysis; in terms of the macro analysis of continuum mechanics, substantial experiments are conducted with HAAKE RS600 rotational rheometer and the rheological equation as well as the viscosity-temperature equation are further developed with tested rhrogramme and viscosity-temperature curve, respectively. Beased on the researches on thixotropic mechanism and thixotropy fluid property, hysteresis loop curve, structure failure and viscosity build-up curve as well as shear stress decrement curve for one type oil are first present in this paper. According to the theoretical researches and testing results, a novel thixotropy equationwith τ=τ_∞e~ pattern, which is of hi-accuracy, few parameter and simplicity, is developed.Considering the influence of various parameters on rheological behaviour, depressant adding condition is optimized and experimental evaluation on BEM-5P is conducted, which further unrip its mechanism on the Huabei crude. A corresponding viable pipe transportion programmel is also recommended.

本文基于原油流变学、非牛顿流体力学、石油化学、结晶学、原油管输工艺学等理论，以华北原油为研究对象，结合原油物性及实验影响因素分析，制定出实验研究的评价指标及实验方案；从连续介质力学宏观分析的角度，利用HAAKE RS600高端旋转流变仪开展了大量的室内实验，并运用微观研究方法，测定了油样的流变曲线和粘温曲线，建立了流变方程和粘温方程；通过对触变性机理和触变性流体特征的研究，首次对华北原油测定出滞回环曲线、结构破坏与恢复粘时曲线、剪切应力裂降过程曲线，并在理论研究和实验结果的基础之上，建立了能定量描述含蜡原油剪切应力裂降过程的新型三参数触变模式τ=τ_∞e~b/(t+c，该模型具有精度高、参数少、实验简便且适用性强的特点；通过对含蜡原油流变性的影响因素理论研究，开展了加剂条件优选及BEM-5P降凝剂室内评价实验，进一步揭示了降凝剂对华北原油作用机理，在此基础之上，提出了华北原油管输的可行性方案。

In consideration of the chain grate stoker with steam capacity of 20t/h,based on experimental testing data,a fast modeling with step input,was set up by calculating transfer function on step response curve,gets model parameters on "two-point method" on the first,and then modifies those parameters with "curve fitting method" through MATLAB/SIMULINK software,proves that the combination of "two-point method" and curve fitting mothod...

对阶跃响应曲线先采用&两点法&得出模型参数，再采用&曲线拟合法&对模型参数进行修正，从而实现系统动态特性建模。着重讨论了针对阶跃响应曲线，在&两点法&建模的基础上，进一步采用在MATLAB/SIMULINK软件环境下&曲线拟合法&对模型进行修正，发现&两点法&与&曲线拟合法&相结合的方法可以更准确地对系统进行建模。此方法可为锅炉燃烧优化设计、热力系统仿真研究提供热工对象理论模型，也可用于控制系统调试时控制参数的预选择。

According to the dynamics analysis of the cotton sliver coiling process,by considering the minimum friction of cotton sliver caused by screwy pipes as objective function the design of screwy pipes of can coiler is explained based on the theory of the variational direct-method.

对棉条圈条过程定量地进行了动力学分析，以棉条所受曲线斜管摩擦力最小为目标函数，基于变分问题直接法原理设计出圈条盘螺旋形曲线斜管。这种螺旋形曲线斜管充分利用圈条盘的转动对棉条产生的离心力甩摆作用，使棉条所受曲线斜管摩擦力较小，从而使出条更顺畅；在一定程度上降低了圈条盘螺旋形曲线斜管堵眼频率与条筒乱条几率，使其更适应现代并条机生产高速化的要求

In order to contribute to analyse and compute easily setback moving devices on the projectile fuzes,and to make the fuze devisers be able to get the approximate acceleration curves with a few parameters such as tube length and muzzle velocity of the guns,the displacement-time curve and velocity-time curve of gun interior ballistic are fitted with the Logistic models,then the formula of projectile acceleration curves in bore are gotten by the derivation of the formula of fitting velocity-time curve.

为了便于炮弹引信后坐运动机构的分析和计算，能使引信工作者只根据身管长度和炮口速度等少量参数就能获得弹丸膛内加速度近似曲线，运用Logistic函数拟合火炮内弹道的位移－时间曲线和速度－时间曲线，再对拟合得到的速度－时间曲线求导便得到了弹丸膛内加速度近似曲线。

The research results are highly reproducible owing to the repeatable micro-model technique.(2) Quantifying the Kr-S-P curves in two-phase flow. The validity and adaptability of multi-phase curves are verified using micro-model testing bed tailored to adequate scale of pores. Results obtained from the P-S micro-model tests generally agree with the threshold values of displacement mechanism offered by researchers using geometric shapes. The hysteresis of .experimental Kr-S curves of numerous two-phase flows are depicted in terms of connectivity and humidification. The P-S and Kr-S curves of two-phase flow are well-derived in conjunction with micro-model test results and empirical van Genuchten model. For the curve expressing the relation between saturation and capillary pressure, experimental results of water-air flow system corresponds to the theoretical data.

2二相流体对微模型实验之Kr-S-P关系：包括以孔颈尺寸比例组成微模型板实验平台去证实多相流流动主要特性曲线正确性与适用性；验证水和空气二相流之P-S微模型实验，与前人以几何形状所推估出来的置换机制门槛值大致吻合；以连通性及润湿性等解释多组二相流体对Kr-S曲线实验之迟滞现象；以微模型实验结果配合van Genuchten特性曲线经验式互推估二相流体对之P-S与Kr-S 曲线，推估结果良好；以比例原则推估多组二相流体於毛细压力-饱和度曲线的结果，显示在水和空气二相流体对为参考流体对时，推估其他组流体对吻合度最佳。

The camber near the switch point changes rather slowly, while it changesrapidly at certain distance range from switch rail.

建议尖轨轨头非工作边的刨切曲线采用缓和曲线和圆曲线的组合线型，在尖轨理论尖端至圆曲线之间，为一曲率渐变的缓和曲线，在尖轨尖端附近矢度变化较慢，而在距尖轨一定范围时，矢度变化较快。

The radius of the combined curve is 1000m on the theoretical switch point and 538.2497m on the actual switch point, the radius of the circle curve is 365.9m, the actual planing length of switch rail is 6.8m.

该组合曲线尖轨理论尖端位置的曲线半径为1000m，尖轨实际尖端位置的曲线半径为538.2497m，圆曲线区段的曲线半径为365.9m，尖轨实际刨切长度为6.8m。

For the regular curves, we find two Killing fields for the purpose of integrating the structural equations of the p-elastic curves and express the p-elastica by quadratures in a system of cylind...

对于正则曲线的情形，我们发现了两个用于求解p-弹性曲线的结构方程的Killing向量场并用积分将p-弹性曲线在一个柱面坐标系中表示出来，而对仿射星形曲线的情形，我们用积分方法解出了欧拉-拉格朗日方程，利用Killing向量场及线性李代数s1(2，R)、s1(3，R)和s1(4，R)的分类将高阶结构方程降为一阶线性方程，因此我们用积分完全解出了中心仿射p-弹性曲线。

For the regular curves, we find two Killing fields for the purpose of integrating the structural equations of the p-elastic curves and express the p-elastica by quadratures in a system of cy...

对于正则曲线的情形，我们发现了两个用于求解p-弹性曲线的结构方程的Killing向量场并用积分将p-弹性曲线在一个柱面坐标系中表示出来，而对仿射星形曲线的情形，我们用积分方法解出了欧拉-拉格朗日方程，利用Killing向量场及线性李代数s1(2，R)、s1(3，R)和s1(4，R)的分类将高阶结构方程降为一阶线性方程，因此我们用积分完全解出了中心仿射p-弹性曲线。

On the other hand, the more important thing is because the urban housing is a kind of heterogeneity products.

另一方面，更重要的是由于城市住房是一种异质性产品。

Climate histogram is the fall that collects place measure calm value, cent serves as cross axle for a few equal interval, the area that the frequency that the value appears according to place is accumulated and becomes will be determined inside each interval, discharge the graph that rise with post, also be called histogram.

气候直方图是将所收集的降水量测定值，分为几个相等的区间作为横轴，并将各区间内所测定值依所出现的次数累积而成的面积，用柱子排起来的图形，也叫做柱状图。