晶

Based on the research on the solidifiation of twin-roll casting strip,the analytical model and emulational model of nucleation,the growth of dendrity tip and colunar dendrity transformation to equiaxis dendrityof twin-roll casting strip solidification are established by means of the principle of metal solidification and modern computer emulational technology.

在研究双辊薄带连铸工艺凝固过程的基础上，运用金属凝固的基本原理，并用现代计算机仿真技术建立了双辊连铸薄带凝固的形核、枝晶尖端的生长动力学、柱状晶向等轴晶生长的转变的解析模型及仿真模型，为双辊连铸薄带凝固组织形成的仿真模拟奠定了基础。

From mineralogy, crystallochemistry and silicate physical chemistry point of view, this article mainly discussed the relationship of ingredient and crystal structure, the crystal habit of crystalline phases with different structure, and influences of thermodynamic conditions to crystal growth.

本文在纵观陶瓷发展史、了解前人对结晶釉的研究现状基础上，从矿物学、结晶化学以及硅酸盐物理化学的角度出发，主要研究K〓O-Na〓O-CaO-MgO-Al〓O〓-SiO〓系统结晶釉中成分与析晶体结构的关系，不同结构晶相的析晶特点，以及热动力学条件对析晶状态的影响等。

It was concluded that P2O5 was an effective nucleating agent for this glass system. The nucleation density of this glass system was too low to form tiny crystal after heat-treatment, when it contained no P2O5, and the major crystal phase was lithium silicate. Adding P2O5 resulted in major tiny crystal phase of lithium disilicate after heat-treatment.

结果发现P2O5是该玻璃体系的有效成核剂，未添加P2O5的玻璃体系成核密度低，热处理后不能形成微晶体，且主晶相为硅酸锂；添加P2O5使玻璃在热处理后形成以二硅酸锂为主晶相的微晶玻璃。

Hejian City drawbench hundred square mold factory is the production of polycrystalline Quartet import mode (Polycrystalline Zhengfang mold, Polycrystalline flat side mode), Copper Clad Steel Wire Drawing Die, mold and all kinds of aluminum-magnesiumtungsten steel special-shaped mold mainly Professional manufacturer.

河间市百方拉丝模具厂是以制作进口聚晶四方模（聚晶正方模、聚晶扁方模）、铜包钢拉丝模、铝镁丝拉丝模及各种钨钢异型模具为主的专业生产厂家。

The results showed that M1 and M2 present the enantiotropic nematic phase ,M3 presents the nematic phase with SA,SC and SB smectic phases and M4 presents the nematic phase with SA,SC and SB monotropic phases.

研究表明，单体M1和M2呈现互变向列相，M3呈现向列相和近晶A相、近晶C相和近晶B相，M4呈现向列相和单变SA相、SC相和SB相；聚合物P1和P2呈现向列相，P3和P4呈现SA相和向列相。

By applying electromagnetic vibration on solidification front of Sn-10Pb alloy,creation of equiaxed grain zone in ...

在低强度电磁振荡条件下，凝固组织细化和等轴晶化的原因是：电磁振荡力对金属初生晶的周期性拉伸、压缩、剪切、折弯、扭转等机械作用，使其出现断裂和剥落，增加形核数量；电磁振荡的局部搅拌作用使固/液界面前沿的温度和成分趋于均匀化，导致梯度降低，抑制了柱状晶的生长。

The integrated mathematic model of solidification is then established, which includes heat transfer, solute transfer, liquid flow and the movement of equiaxial crystals in solidification process.

本文通过两相流理论建立了等轴晶在对流金属液中移动的非稳态数学模型，推导了求解等轴晶在非稳态、非均匀液相流场中非稳态移动的数值表达式，并进一步推导了描述等轴晶在凝固过程中迁移、堆积规律的局部堆积方程式。

An EPMA was performed quantitatively on the influence of Ce upon the Mn segregation in cellcrystals, columnar and Equiaxial dendrites of high-Mn steel.

与此同时，用电子探针微区分析考察了Ce对高锰钢中Mn在胞晶、柱状树枝晶及等轴晶内偏析的定量影响。

This β-eucryptite phase begins to dissolve at 1320℃ or above where the tielite (Al2TiO5) is apparently unstable and decomposed to corundum (Al2O3) and rutile (TiO2). Thirdly, in this dissertation, the influence of composition, crystallization temperature, and time on CTE were investigated detailedly.

然后，对制得微晶玻璃材料的热膨胀性能及力学性能与材料组成的关系，成核剂对玻璃析晶性能和膨胀系数的影响，以及晶化温度和时间的关系进行了分析。

Two reasons can be explained the improvements of catalytic activities after the addition of Ce. One is the increase of the thermal stability of Ni-B and Ni-P nanoamorphous alloys, which retards the nanocrystalline Ni to aggregate during the exothermal reaction of benzene hydrogenation. The other is to make their grain sizes smaller, thus it increases the number of activity center in unit mass.

说明加入Ce提高催化活性的主要作用有两方面，一是提高Ni-B和Ni-P纳米非晶态合金的热稳定性，抑制催化苯加氢反应时大量放热促使纳米晶Ni的聚集长大；二是使生成的Ni-B和Ni-P纳米非晶态合金颗粒更为细小，从而增加单位质量样品的活性中心数量。

However, as the name（read－only memory）implies, CD disks cannot be written onorchanged in any way.

然而，正如其名字所指出的那样，CD盘不能写，也不能用任何方式改变其内容。

Galvanizes steel pallet is mainly export which suits standard packing of European Union, the North America. galvanizes steel pallet is suitable to heavy rack. Pallet surface can design plate type, corrugated and the gap form, satisfies the different requirements.

镀锌钢托盘多用于出口，替代木托盘，免薰蒸，符合欧盟、北美各国对出口货物包装材料的法令要求；喷涂钢托盘适用于重载上货架之用，托盘表面根据需要制作成平板状、波纹状及间隔形式，满足不同的使用要求。