显微镜使用

Simultaneously, the deposit of CaCO3 crystallite was monitored by video microscope and atomic force microscope.

同时使用摄像显微镜和原子力显微镜监测悬挂在溶液中金属板表面垢的沉积过程。

The main intention of this thesis is to study some fundamental surface phenomena with chemical and/or physical interests by scanning probe microscope, and to exploit the instruments themselves into the research of surface chemical process, especially surface photochemical process.

本论文的研究目的在于使用扫描探针显微镜研究表面上的基本化学和物理现象，同时探索扫描探针显微镜在表面化学过程，尤其是表面光化学过程中的应用，所涉及到的主要研究内容和结论如下

The thermal properties, mechanical properties of PI-MWNTs nanocomposite were analyzed by Thermogravimetric analysis, Universal Test Machine and Hardness Pencil Test. The morphology of PI-MWNTs was observed by scanning electron microscopy. The dispersion of MWNTs in matrix were observed by transmission electron microscopy. The electrical property of composite were obtained by Super Megohmmeter.

研究中使用傅立叶转换红外光谱仪来鉴定其化学结构，热重损失分析仪探讨材料的热稳定性质，万能试验机及铅笔硬度计观察其机械性质，扫描式电子显微镜与穿透式电子显微镜来观察材料的表面型态及奈米碳管於基材中的分散性，超绝缘仪量测材料的电性。

The thermal properties and mechanical properties were analyzed by Thermogravimetric analysis and Hardness Pencil Test and Universal Test Machine, respectively. The structure of prepared PI-MWNTs was characterized by Fourier transform infrared spectrometry. The morphology of PI-MWNTs were observed by scanning electron microscopy and transmission electron microscopy. The electrical conductivity was analyzed by Super Megohmmeter.

本研究中使用能量分散光谱仪来鉴定多壁奈米碳管纯化效果，热重损失分析仪、铅笔硬度计、万能试验机分别测定材料的热稳定性质和机械性质，傅立叶转换红外光谱仪来鉴定其化学结构，扫描式电子显微镜与穿透式电子显微镜来观察材料的剖面型态与奈米碳管和基材之间的分散性，超绝缘量测仪量测材料的电性。

Rufo, and Sangdiximeng solve this important problem, in their view, the use of "total internal reflection microscope," the new microscope is a new observation methods, and to illuminate the cell surface of HIV is the key.

儒佛内和桑迪·西蒙解决了这个重要的难题，他们认为，使用"全内反射显微镜"的新显微镜是的新观察方法，而照亮HIV病毒的细胞表面是关键。

Based on the development of key techniques,such as fabrication of optical fiber probe and probe-sample distance nonoptical control, ete,we have built a scanning shear force near-field optical microscope ,which can be combined with an inverted optical microscope.

在发展光纤探针制备和探针与样品近场间距非光学控制等关键技术基础上，我们研制成能与倒置光学显微镜联合使用的扫描切变力/近场光学显微镜，并具有反射和透射等工作模式以及能在溶液环境中工作。

Its rule of change was obtained. On the basis of other studies, the flocculation kinetics and flocs structure was studied. By making some assumptions, collision frequency were presented. Then the the flocculation kinetics model was established through population balance equation. Comparison of experimental data and modeling results indicate that there are the same trend between the two. So the model can predict flocs number and size during flocculation of Yellow River's loess particles without using empirical parameters. The TEM and SEM were used to obsever flocs in the study of floc structure. The flocculation was divided as flocculi, floc and floc aggregate. The flocs structure model was established by assumption that particles position in floc accords with tetrahedron. The fractal dimension of model and experimental flocs was found to be coincident. So the model can reflect the structure of flocs formed in flocculation of Yellow River's loess particles by macromolecule flocculant at a certain extent.

最后，本文还对絮凝动力学和絮体结构进行了研究，在前人研究的基础上，针对高分子絮凝黄河泥沙，对絮凝过程作了一些符合试验条件的假设，建立了颗粒碰撞频率表达式，应用了颗粒数量平衡方程，从而建立了絮凝过程的动力学生长模型，模型计算结果与试验数据对比表明，二者趋势一致，在没有使用经验参数的情况下基本上能够描述黄河泥沙絮凝过程中絮体数量和尺寸分布的变化过程；对絮体结构的研究中，应用扫描电子显微镜和透射电子显微镜对絮体进行了观察，将絮体分为絮粒、絮团和絮网三个不同的生长阶段，通过假设颗粒结合位置符合正四面体，建立了絮体结构模型，计算得到的模型絮体分形维数基本与试验中的实际絮体相符，在一定程度上能眵反映高分子絮凝黄河泥沙生成的絮体结构。

Its rule of change was obtained.On the basis of other studies,the flocculation kinetics and floes structure was studied. By making some assumptions, collision frequency were presented.Then the the flocculation kinetics model was established through population balance equation. Comparison of experimental data and modeling results indicate that there are the same trend between the two. So the model can predict floes number and size during flocculation of Yellow River's loess particles without using empirical parameters.The TEM and SEM were used to obsever floes in the study of floe structure.The flocculation was divided as flocculi,floc and floe aggregate.The floes structure model was established by assumption that particles position in floe accords with tetrahedron.The fractal dimension of model and experimental floes was found to be coincidentSo the model can reflect the structure of flocs formed in flocculation of Yellow River's loess particles by macromolecule flocculant at a certain extent

最后，本文还对絮凝动力学和絮体结构进行了研究，在前人研究的基础上，针对高分子絮凝黄河泥沙，对絮凝过程作了一些符合试验条件的假设，建立了颗粒碰撞频率表达式，应用了颗粒数量平衡方程，从而建立了絮凝过程的动力学生长模型，模型计算结果与试验数据对比表明，二者趋势一致，在没有使用经验参数的情况下基本上能够描述黄河泥沙絮凝过程中絮体数量和尺寸分布的变化过程；对絮体结构的研究中，应用扫描电子显微镜和透射电子显微镜对絮体进行了观察，将絮体分为絮粒、絮团和絮网三个不同的生长阶段，通过假设颗粒结合位置符西安建筑科技大学博士学位论文合正四面体，建立了絮体结构模型，计算得到的模型絮体分形维数基本与试验中的实际絮体相符，在一定程度上能够反映高分子絮凝黄河泥沙生成的絮体结构。

The composition of the Cr film was identified by X-ray diffraction, the interface of Chromium/Zircaloy was studied with scanning electron microscopy, the morphology of Cr film was observed with atomic force microscopy.

使用X-射线衍射仪对沉积薄膜进行了物相分析，采用扫描电子显微镜和原子力显微镜对薄膜的表面形貌及膜／基界面做了观察分析。

Because of the wavelength of the x rays used, soft x ray microscopes will never match the highest resolution possible with electron microscopes.

由于使用的 X射线的波长使软性 X射线显微镜永远比不上电子显微镜可能具有的最高分辨力。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。