方式

In the light of cost index and pollution degree, the characteristics of kinds of pulp are analyzed in detail, and the GP pulp which is low cost, high-yield, no-pollution is chosen as the material of tableware. Based on material element analyzed, shaping technology is designed, the to and for single plane shaping equipment which is high shaping quality, high production efficiency and is easy to automatize is chosen. All kinds of measure are taken to solve the problems which are inequality in the shaping process of GP pulp, and dosage which matches with GP pulp is chosen. Some ways of fixing shape and heat up are analyzed, the technology of saving energy of heat pressing to fix shape being composed of oil heat and only one fixed shape in the mold is applied, with which it is high production efficiency, low cost to fix shape effectively, which saves energy 30 percent. In order to make the production line meet with material of GP pulp, measure are taken to solve the problem of pulp adhered to netlike molding which can lead to carry material difficult, the structure of fully automatic equipment is renovated, the loaded beam is optimizationally designed to make equipment structure compactand improve location precision and products quality. According to technologic flow and actual characteristic, Omron PLC is chosen as the core of the control system, proximity switch as detect unit take the place of touch switch, software is designed reasonably according to time order figure, hardware is simplified, the reliability of system is advanced, the stability of system is assured to make production order. Intelligence neuron PID system is studied theoretically which is made up of both neuron with self-organizing and self-learning function and ordinary PID with the characteristic of the simple structure and high stability, which can automatically tune the parameter with the change of system parameter, remain perfect performance.

按成本指标和污染程度分析各浆料的特点，选择低成本、高得率、无污染的磨石机械浆为原料，在原料组分分析的基础上，设计成型工艺，选择成型质量好、生产率高、易实现自动化的往复式单板成型机，采取各种措施解决GP浆成型不均匀的问题及选择与机械浆相匹配的助剂；分析几种定型方式和加热方式，采用定型效果好、生产率高、成本低的油加热与模内一次性定型相结合的热压定型节能技术，节能30％；为了使生产线适应磨石机械浆原料，采取相应措施解决由于粘网造成物料转移困难，对全自动设备结构进行改进设计，着重对物料传送系统的关键部件——承载梁的进行优化设计，使设备更加紧凑合理，提高设备的定位精度和产品质量；根据生产线工艺流程和现场特点，选用OMRON CPM1A型PLC为主核心，接近开关作为检测元件，替代有触点开关，选用可编程终端代替常规面板按扭，并按照时序图科学合理地设计软件，有效地简化系统硬件构成，提高系统的可靠性，保证系统的稳定性，从而使生产更加通畅有序；从理论上探索将神经元应具有的自组织、自学习要求与PID控制结构简单、稳定性好的全自动纸浆模塑餐具生产线的研究特点结合起来，构成神经元自适应PID控制器，当参数的变化时，系统能自行参数整定，保持优良的工作性能指标，满足实际需求。

Any column of the matrix can be permuted randomly, and the permutation between columns should satisfy the form which is the automorphism group of the binary cyclic Turbo code generated by the feedback polynomial.

该矩阵的任意一列可采用随机交织方式，而列间交织方式必须是按由反馈多项式生成的循环码字集的自同构群构成。

Since the lotus root decompression for the box to start the counter protective structure, there are auto-transformers, AC contactor, smart motor protectors digital display components, etc., and below 75 kilowatts for the products, the Department of the use of automatic control mode, and more than 80 kilowatts of products, with two automatic control mode manually, by the change-over switch to switch, smart motor protectors digital display of 0 ~ 240 seconds can be automatically adjusted to control start-up time, prepared autotransformer 60 percent have a rated voltage (65%) and 80% tap two groups, then the factory in 60%(65%) on tap, if you need a larger starting torque, which can be accessed by 80% in the tap, and there are overload, and loss of pressure off the protection.

自藕减压启动柜为箱式防护结构，有自耦变压器、交流接触器、智能数显电机保护器(时间继电器、时间继电器)等元件组成，对于75千瓦及以下的产品，系采用自动控制方式，80千瓦及以上的产品，具有手动自动两种控制方式，由转换开关进行切换，智能数显电机保护器在0～240秒内可以自动调节控制起动时间，自耦变压器备有额定电压60％（65％）及80％二组抽头，出厂时接在60％（65％）抽头上，如果用户需要用较大的起动转矩，可接在80％抽头上，并有过载、断相及失压保护。

The general analysis is focused on insulation level of the autotransformer neutraland the entrance of the autotransformer after small reactance grounding. In addition, the impedancevalue of the small reactance, the protection of the neutral and autotransformer entrance, and insulation coordination is particular discussed.

本文将对500kV 自耦变中性点由直接接地改成经小电抗接地的方式后，在多种不同的运行方式下，对其中性点、主变入口处上出现的过电压进行了详细全面的分析，并在此基础上对中性点电抗器的小电抗取值、主变中性点和主变入口处的过电压保护和绝缘配合问题进行了探讨。

The relations of main characteristic with average velocity have been presented.

其次，本文对国内常见的上送风和侧送风方式，在等温送风不同风量的情况下，实测了房间工作区内不同高度上的气流特征，给出了不同情况下平均风速与主要特征参数的回归关系式，分析了不同送风方式和不同风量时工作区内气流特征的特点。

Experimental transmission of an unnamed bovine Babesia by Hyalomma spp., Haemaphysalis longicornis and Boophilus microplus: Experiments were undertaken to determine the mode of transmission to cattle of an unnamed Babesia sp.

二。采用蜱传播试验，研究了璃眼蜱蜱种、长角血蜱和微小牛蜱对牛的巴贝斯虫未定种的传播能力与传播方式：为了确定小亚璃眼蜱、残缘璃眼蜱、麻点璃眼蜱、长巴贝斯虫未定种的发现及牛巴贝斯虫病的免疫诊断和药物防治研究角血蟀和微小牛蟀对在我国分离的牛的一种未命名的巴贝斯虫的传播能力与传播方式而进行了研究。

In this paper, the change of back electromotive force current with the different PWM modes are analyzed in detail on the base of BLDCM model. According to theory and experiment ,ON-PWM type restrains the peak value of back electromotive force current and brings the lest effect to the motor control system.

基于无刷直流电动机的数学模型，分析比较了不同PWM调制方式下反电势电流的变化规律，并通过理论推导和仿真实验证明了当电机系统采用ON-PWM调制方式时，能有效地抑制反电势电流的峰值且对电机控制系统造成的影响最小。

It revolutionised the transport of goods by abolishing the traditional (and back-breaking) system of "break bulk" loading, and thus helped oil the wheels of globalisation.

集装箱的出现改变了传统的"散装"载货的方式，令运输方式发生革命性转变，间接加速了全球化进程。

From the aspect of urban and rural integrative "Modern Cadastration" management style,the paper discusses the differences from traditional cadastral alterations,introduces right alteration s,land use alterations and history backdate of "Modern Cadastration" alterations.

本文从城乡一体化"现代地籍"管理方式的角度，探讨了有别于传统方式的现代地籍变更模式，并详细介绍了"现代地籍"变更中的权属变更、地类变更和历史回溯。

Wastewater containing titanium pigment was treated by microfiltration membrane, Nanometer titanium can be purified and concentrated by use of microfiltration. Operational conditions were optimized and the model was built. Finally, the amount of wash water was reduced. Based on the above research, the whole set equipment was designed, which can meet the needs in a titanium industry with a capability of 500 ton per year. Backflush and automatic control were used in the equipment, which has been steadily run two years, has been widely adopted in titanium industry. The technology has been widely adopted in titanium industry.In the recent years, whole set equipment of ceramic membrane was increasingly used in the recovery of desired production from fermentation broth in China. A new membrane process integrated with pretreatment of flocculation or coagulation was exploited to recover Inosine. ZrO2 ceramic membrane was used in the work, and the average permeation flux could reach 150L/m2.h under pH value of 3, transmembrane pressure 0.1MPa, CFV 3m/s, and temperature higher than 70C. The recovery ratio of inosine is higher than traditional recovery method, although inosine degraded under acidic and high temperature condition.

实验表明，ZrO_2膜处理肌苷发酵液的合适条件为pH=3、操作压力为0.1MPa、膜面流速3m／s、温度大于70度，此时可以获得平均渗透通量150L／m~2h，但由于酸性条件、高温下肌苷降解，导致肌苷收率有所降低，但仍高于传统肌苷提取方法得到的收率；为进一步提高肌苷得率，缩短提取工序，实验研究了絮凝剂预处理发酵液，解决碱性条件下由于蛋白析出导致膜污染加重的问题，研究表明采用CaCl_2絮凝并调节pH=11，可以获得平均渗透通量为180L／m~2h，肌苷得率大于95％；比较了三种肌苷提取工艺得到的产品质量，采用预处理与陶瓷南京工业大学博士学位论文膜分离结合的除杂工艺得到的粗昔质量与陶瓷膜分离、离子交换及活性炭吸附工艺生产的粗普质量相当，均优于传统的提取工艺；设计了每小时处理12一巧吨肌普发酵液的陶瓷膜成套装置，采用部分内循环的方式降低设备的能耗，简化了肌昔提取方式，提高了产品的收率和得率，由于减少离子交换和活性炭吸附，使得工厂废水排放量降低30一40%，降低酸、碱用量，有利于环境保护。

In the negative and interrogative forms, of course, this is identical to the non-emphatic forms.

。但是，在否定句或疑问句里，这种带有"do"的方法表达的效果却没有什么强调的意思。

Go down on one's knees;kneel down

屈膝跪下。。。下跪祈祷