新型

Chapter 2 Study on the preparation and application of a new electrical active-inactive switch molecular beaconWe developed a new electrical active-inactive switch molecular beacon and used carminic acid as signal molecule.

第二章：新型电化学活性-非活性转换分子信标的研制及其应用本章中，首先提出了一种基于电化学活性-非活性分子转换的新型分子信标。

Therefore,test and research on subgrade treatment of cataclastic expansive rock,retaining and protection of high cut slope in crushing and weak rock,and new retaining structure types of high embankment slope,such as piles-plate wall of prestressed anchor wire,reinforced earth retaining wall of new type straps,are conduc.

对此，开展了碎裂膨胀岩路基边坡处理、破碎软岩路堑高边坡挡护和路堤高边坡新型支挡结构(锚拉式桩板墙，新型拉筋加筋土挡土墙)等项结合工程的科研试验，取得突出成果，为南昆铁路的顺利建成和安全运营提供了科学依据。

In this paper, in order to solve the load balance problem of Ad hoc network, works on different MAC protocol performance analyse, theoretical modeling, multi-path routing load balance protocol and cocurrent multipath transfer protocol are represented.

为了满足自组织网络对于负载均衡传输的需求，本文重点对解决Ad hoc网络负载均衡相关问题在MAC层协议性能分析，理论建模以及适用于负载均衡的新型路由协议和新型传输协议等几个方面展开了研究。

Objective To evaluate the cytotoxicity and cell affinity of a porcine collagenic dermal matrix to guide the improvement of the porcine dermal scaffold.

目的 通过对一种新型的猪胶原基真皮支架的细胞毒性和与成纤维细胞的亲和性进行评价，为这种新型生物材料的安全应用及工艺改良提供依据。

The thesis expounds in a novel and all-round way eight characteristics that quality military personnel of new type need to accomplish the requirements of the new military transformation, thats, comprehensiveness, compositeness, all-roundness, innovativeness, developmentalness, intelligence, openness, and applicability.

本文在研究过程中采取了抽样分析、逻辑推理、概括总结和虚拟研究等方法，对新军事变革条件下新型高素质人才培养问题了深入研究，对当前军队院校人才培养与新军事变革存在的差距进行了系统分析，对新军事变革条件下的人才培养要求进行了严密论证，新颖全面地阐述了军队院校培养新型高素质人才的对策。

The fourth part, based on the comparison to the four big cities of northeast, analyzes the actual development condition and the status of Changchun; Using the quantitative analysis method, carries on the whole appraisal of the Changchun industrial development situation as well as the connectional development situations with other industries; According the actual development condition, discussed that the Changchun's new-type industrial system should be prioritize develop several industries and the mentality of their construction and development; Proposed several suggestions to carries on the macro economical regulation and control to the Changchun's new-type industrial system.

第四部分，在对东北地区四大中心城市进行比较的基础上，分析长春市的实际发展状况和地位；利用定量分析的方法，对长春市的工业发展情况以及与其它产业关联发展的情况进行整体评价；根据实际发展状况，探讨了长春市新型工业体系应重点发展的几大系统以及它们的建设和发展思路；提出了对长春市新型工业体系进行宏观调控的几点建议。

Dealcoholization temperature markedly influences the surface area and porosity of the resultant MAO-supports. When the support was pretreated at lower or higher temperature, the corresponding MAO-support shows very low surface area;2.XRD and IR analyses indicate that MAO has reacted with the residual ethanol in the supports, which is an important manner to get MAO fixed on the carrier. Morever, XPS analyse indicates that MAO can also be coordinated with MgCl_2, which is another way to get MAO fixed on the support;3.ICP and EDX analyses indicate that dealcoholization temperature not only determined the element content on the solid catalyst, but also influences the element distribution on the carrier;4.The activities of the supported phenoxy-imine catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature. The support (MSP-5) obtained by treating MgCl_2·2.56C_2H_5OH at 160℃for 4 h, then modified by MAO is very effective for immobilizing complex 3, the resultant solid catalyst (MSPC-5) shows very high activity in ethylene polymerization, and its kinetics of polymerization is stable during the reaction process. Finally, PEs with spherical morphology and high bulk density (over 0.35g/ml) were obtained, without reactor fouling;5.In this work, polymerization conditions such as alkylaluminums, Al/Zr ratio, temperature and H_2 had a pronounced effect on the activity of MSPC-5 and properties of PE;(3). New MgCl_2-Supported Single-Site Catalysts for Ethylene PolymerizationIn this work, a kind of new MgCl_2 support was obtained by anhydrous MgCl_2 co-milled with solid MAO, and it is a creative contribution. Then some single-site catalysts were supported on the new MgCl_2 support, and the resulted solid catalysts were tested in ethylene polymerization, the results indicated that:1.XRD and IR analyses indicate that MAO does be coordinated with MgCl_2, which is in good agreement with the results obtained by XPS;2.co-mlling time had no obvious effect on the texture of support after 12 hours;3.In this work, MgCl_2 was co-milled with solid MAO for different hours, and then complex 3 was supported on these co-milled supports. It was found that co-milling time markedly influences the activity of solid catalysts, but it had negligible effect on the kinetic profile and the properties of resultant PE.

XPS研究结果表明，MAO不仅仅只和乙醇作用，MAO还与MgCl_2本身有一定的作用，这是一个极为重要的发现；3、通过ICP和EDX表征，发现载体的脱醇温度直接影响着元素在固体催化剂中的含量及分布；4、脱醇温度极大地影响着负载苯氧基亚胺类催化剂的活性和聚合物的性能，特别是原始载体经160℃活化4小时制备得到的固体催化剂MSPC-5的活性明显高于其他脱醇温度条件下制得的固体催化，并且催化剂寿命长，表现出稳定的动力学行为，最终获得了高堆密度(大于0.35g／ml)的球形聚乙烯颗粒；5、本文选择MSPC-5为研究对象，考察了聚合反应参数对催化剂的活性及其聚合物的影响，研究发现：不同的烷基铝对催化剂具有非常重要的影响，特别足TIBA对MSPC-5的助催化活性最高，烷基铝的加入量有一个较佳值，聚合温度为80度时活性最高，H_2的加入使催化剂的活性明显降低且聚合物的分子量也减小；、新型氯化镁载体负载单活性中心催化剂催化乙烯聚合本文创造性采用固体MAO与无水氯化镁直接进行共研磨，制备出了一种的新型的氯化镁载体，并将该载体用于多种单活性中心催化剂的负载化研究，研究表明：1、通过BET、XRD的表征，再次证实了MAO与MgCl_2之间具有直接作用，与XPS的研究结果相一致；2、当研磨时间高于12小时时，延长研磨时间对载体的结构没有显著的影响；3、将配合物3负载于共研磨时间不同的一系列载体上，乙烯聚合结果表明，尽管共研磨时间对负载催化剂的活性具有明显的影响，但是它对聚合物的性能以及催化剂的影响不明显。

Dealcoholization temperature markedly influences the surface area and porosity of the resultant MAO-supports. When the support was pretreated at lower or higher temperature, the corresponding MAO-support shows very low surface area; 2.XRD and IR analyses indicate that MAO has reacted with the residual ethanol in the supports, which is an important manner to get MAO fixed on the carrier. Morever, XPS analyse indicates that MAO can also be coordinated with MgCl_2, which is another way to get MAO fixed on the support; 3.ICP and EDX analyses indicate that dealcoholization temperature not only determined the element content on the solid catalyst, but also influences the element distribution on the carrier; 4.The activities of the supported phenoxy-imine catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature. The support (MSP-5) obtained by treating MgCl_2·2.56C_2H_5OH at 160℃for 4 h, then modified by MAO is very effective for immobilizing complex 3, the resultant solid catalyst (MSPC-5) shows very high activity in ethylene polymerization, and its kinetics of polymerization is stable during the reaction process. Finally, PEs with spherical morphology and high bulk density (over 0.35g/ml) were obtained, without reactor fouling; 5.In this work, polymerization conditions such as alkylaluminums, Al/Zr ratio, temperature and H_2 had a pronounced effect on the activity of MSPC-5 and properties of PE;(3). New MgCl_2-Supported Single-Site Catalysts for Ethylene Polymerization In this work, a kind of new MgCl_2 support was obtained by anhydrous MgCl_2 co-milled with solid MAO, and it is a creative contribution. Then some single-site catalysts were supported on the new MgCl_2 support, and the resulted solid catalysts were tested in ethylene polymerization, the results indicated that: 1.XRD and IR analyses indicate that MAO does be coordinated with MgCl_2, which is in good agreement with the results obtained by XPS; 2.co-mlling time had no obvious effect on the texture of support after 12 hours; 3.In this work, MgCl_2 was co-milled with solid MAO for different hours, and then complex 3 was supported on these co-milled supports. It was found that co-milling time markedly influences the activity of solid catalysts, but it had negligible effect on the kinetic profile and the properties of resultant PE.

XPS研究结果表明，MAO不仅仅只和乙醇作用，MAO还与MgCl_2本身有一定的作用，这是一个极为重要的发现； 3、通过ICP和EDX表征，发现载体的脱醇温度直接影响着元素在固体催化剂中的含量及分布； 4、脱醇温度极大地影响着负载苯氧基亚胺类催化剂的活性和聚合物的性能，特别是原始载体经160℃活化4小时制备得到的固体催化剂MSPC-5的活性明显高于其他脱醇温度条件下制得的固体催化，并且催化剂寿命长，表现出稳定的动力学行为，最终获得了高堆密度(大于0.35g／ml)的球形聚乙烯颗粒； 5、本文选择MSPC-5为研究对象，考察了聚合反应参数对催化剂的活性及其聚合物的影响，研究发现：不同的烷基铝对催化剂具有非常重要的影响，特别足TIBA对MSPC-5的助催化活性最高，烷基铝的加入量有一个较佳值，聚合温度为80度时活性最高，H_2的加入使催化剂的活性明显降低且聚合物的分子量也减小；、新型氯化镁载体负载单活性中心催化剂催化乙烯聚合本文创造性采用固体MAO与无水氯化镁直接进行共研磨，制备出了一种的新型的氯化镁载体，并将该载体用于多种单活性中心催化剂的负载化研究，研究表明： 1、通过BET、XRD的表征，再次证实了MAO与MgCl_2之间具有直接作用，与XPS的研究结果相一致； 2、当研磨时间高于12小时时，延长研磨时间对载体的结构没有显著的影响； 3、将配合物3负载于共研磨时间不同的一系列载体上，乙烯聚合结果表明，尽管共研磨时间对负载催化剂的活性具有明显的影响，但是它对聚合物的性能以及催化剂的影响不明显。

Recently, study on the ISEs with anti-Hofmeister selectivity pattern is an important and interesting subject in the field of electrochemistry and electroanalytical chemistry.

新型传感器材料特别是新型选择性载体的设计、合成和应用不仅是离子选择性电极研究的一个重要方向，而且也是现代化学关注的主要问题。

Firstly,two novel rare earth complexes(CH_2=CHO)Ln~Ⅲ[2,6-_2PhNSiMe _3]_2Li_3Ln=Y(2,Yb(3)containing arylamido and enolate mixed ligands have been synthesized by treatment of 2 equiv of of 2,6-~iPr_2PhNHSiMe_3 with exces n-BuLi at -78℃in THF for 12h,followed by reaction with 1 equiv of LnCl_3at 80℃for 24h in one-pot.All the two compounds were characterized by spectroscopic methods,elemental analyses,and a single-crystal X-ray diffraction study.

首先，-78℃下，在两当量的2，6-~iPr_2PhNHSiMe_3(1)THF溶液中加入过量的n-BuLi，反应12小时，再加入一当量的LnCl_380℃下，反应24小时，一锅法合成了含胺基、乙烯醇基混合配体的新型稀土金属配合物(CH_2=CHO)Ln~Ⅲ[2，6-_2PhNSiMe_3]_2Li_3Ln=Y(2、Yb(3)，上述化合物结构经单晶X-ray衍射、光谱和元素分析表征，表明我们得到的是一类新型的三价稀土配合物。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。