数值技术

The material job and main conclusion are as follows:(1) A simple boundary orthogonalization procedure independence grids generation method is put forward on the base of algebraic grid generation method; Data structure and computational model on interface are established aiming at blocks of structured grids.

本文针对粘流场数值模拟技术的研究现状和发展动态作了比较全面的回顾与展望，重点研究了网格生成技术、数值求解技术、湍流模型技术和动边界模拟技术，在此基础上建立了模拟自由面湍流场的数学模型，并成功地应用到二维溢流坝和带闸墩的三维溢流坝过坝水流的数值计算。

On the basic of above job a mathematical model of simulation turbulent flow with free surface is established and triumphantly applied to numerical computation on 2D spillway and 3D spillway with frusta of brake.The material job and main conclusion are as follows:(1)A simple boundary orthogonalization procedure independence grids generation method is put forward on the base of algebraic grid generation method; Data structure and computational model on interface are established aiming at blocks of structured grids.

本文针对粘流场数值模拟技术的研究现状和发展动态作了比较全面的回顾与展望，重点研究了网格生成技术、数值求解技术、湍流模型技术和动边界模拟技术，在此基础上建立了模拟自由面湍流场的数学模型，并成功地应用到二维溢流坝和带闸墩的三维溢流坝过坝水流的数值计算。

Recent years as development of the computer and software, it becomes reality using numeric simulation to research grouting in clay. Using the software of PFC2D, the grouting in clay is lucubrated and such achievements are reached: Grouting technologies in existence grouting material and serosity are studied and rational methods are put forward in choosing grouting technology and serosity.(2) Base on numeric simulation biax test a method is explored to simulate clay with PFC2D.(3) A method is explored to simulate grouting using PFC2D.(4) The relation between serosity pressure and diffuseness of grouting in clay with different initial stress is studied.(5) The stress transformation of clay is studied during grouting.(6) The stress distribution is studied under different serosity pressure.(7) The normal stresss and shear stresss at any section are studied.

近年来随着计算技术的发展，使得采用数值模拟的方式研究均质土体中的注浆成为可能，本文则利用离散元程序PFC2D对均质土体中注浆进行了研究，主要做了以下几方面的工作：(1)研究了现有注浆加固技术、注浆材料以及浆液的性质，阐述了合理选择注浆方式以及浆液的方法；(2)采用数值双轴实验，探索了应用离散元模型模拟土体的方法：(3)探索了采用颗粒流程序进行注浆数值模拟的方法途径；(4)研究了在粘土中注浆不同侧向土压力条件下浆液扩散范围与注浆压力规律；(5)研究了注浆过程中不同阶段土体中压应力的变化；(6)研究了不同注浆压力对土体应力分稚的影响：(7)研究了注浆过程中土体中任一截面处正应力与剪应力的对比关系。

The geology research of carbonate reservoirs in Ordovician of Tahe oilfield showed that many large dissolved vugs and fractures were developed. The spread of the reservoir take on a very heterogeneous state. And the typical fractured-vuggy reservoirs was formed. According to the combination of the various spaces, the formation was divided into vuggy formation, fractured-vuggy formation and fractured formation. The research showed that development of the vug is relevant to the its position on the structure, the fractures, the water surface and the weathering surface. Multi-phase charge and recharge of the oil in the reservoirs resulted in the complexity of the fluid distribution. So the"Bottle Model"was brought forward to explain the movement of the water-oil contact. The special storage space and the complex fluid distribution lead to the unstability of the production and the complexity of the water cut. In order to explain the characteristic of the fracture-vug unit was brought forward and the basic principle and method of the partition of the fracture-vug unit was formed. The classification and evaluation of the units were performed according the reserve and energy. Based on the research of geology characteristic and the fluid flow in the reservoir the comprehensive numerical simulation plan of the fractured-vuggy reservoirs were established. Through the selection of the simulation unit, fluid flow type and parameter equivalent the triple media reservoir simulation model was established. Considering the practical application the model was resolved by the DKR decomposition conjugate grads method. Based on the fine reservoir description of Dsitrict IV of the Tahe oilfield the various space type were classified and combined together. The geology model of Unit S48 was constructed. Two typical single well model was established according to the geology and the dynamic phenomena. Finally the single well model and the Unit S48 were simulated by the triple media reservoir simulator. Via the local grid refinement and coarsening in the simulation good matchs were gained. Based on the results of the simulation the reserve distribution, percent of reserve produced in various space and the natural energy were analyzed. The fluid was storaged in the fractures and vugs mostly and more than 90% the produced oil came from the systems. The energy belonged to the active one. The results of simulation accorded with the fact and showed the validity and practicability the research and the simulator.

塔河油田奥陶系碳酸盐岩油藏的地质研究表明，其储层中发育着很多大型的溶蚀洞、缝，储层的平面展布呈现出极度的非均质性，形成了典型的缝洞型碳酸盐岩油藏，根据各种孔隙介质在储层中的组合，将储层分为了溶洞型、裂缝-溶洞型和裂缝型三类；研究表明溶洞储层的发育和构造位置、裂缝的发育、潜水面和风化面的位置等因素有关；多期充注的油气成藏模式导致了流体复杂的赋存状态，由此提出了所谓的"瓶子模型"，解释生产过程中油水界面的变化；特殊的储集空间类型和流体分布特征导致油田在开发过程中表现出很大的不确定性和含水变化的复杂性，为了合理的解释油气田开发过程中的动态特征，提出了"缝洞单元"的概念，并制定了"缝洞单元"纵横向划分的基本原则和依据及划分方法，并对"缝洞单元"进行了分类和评价；基于地质特征和流体在其中流动规律的研究，提出了缝洞型碳酸盐岩油藏的数值模拟综合解决方案，通过模拟单元的选择、流动类型和参数的等效，建立了三重介质油藏三维三相数值模拟模型，采用不完全LU分解预处理共轭梯度法进行了求解；在塔河油田4区精细油藏描述的基础上，将各种类型的孔隙空间进行了归类组合，建立了S48单元的地质模型；通过对油井生产动态进行分析研究，建立了两类和油井地质、生产动态相对应的单井模型；最后应用三重介质油藏数值模拟软件对单井模型和S48单元进行了数值模拟，通过局部加密和粗化等技术模拟流体流动规律，取得了很好的拟合效果；结合数值模拟结果，分析了各种介质中的储量分布、储量产出的百分比以及地层的能量，认为塔河油田缝洞型油藏中流体绝大多数储集于缝洞系统之中，所产出流体90%以上也来自于缝洞系统，其底水能量属于较充足的类型；模拟结果和油田实际情况符合较好，说明了地质研究和油藏数值模拟研究的正确性。

The geology research of carbonate reservoirs in Ordovician of Tahe oilfield showed that many large dissolved vugs and fractures were developed. The spread of the reservoir take on a very heterogeneous state. And the typical fractured-vuggy reservoirs was formed. According to the combination of the various spaces, the formation was divided into vuggy formation, fractured-vuggy formation and fractured formation. The research showed that development of the vug is relevant to the its position on the structure, the fractures, the water surface and the weathering surface. Multi-phase charge and recharge of the oil in the reservoirs resulted in the complexity of the fluid distribution. So the"Bottle Model"was brought forward to explain the movement of the water-oil contact. The special storage space and the complex fluid distribution lead to the unstability of the production and the complexity of the water cut. In order to explain the characteristic of the fracture-vug unit was brought forward and the basic principle and method of the partition of the fracture-vug unit was formed. The classification and evaluation of the units were performed according the reserve and energy. Based on the research of geology characteristic and the fluid flow in the reservoir the comprehensive numerical simulation plan of the fractured-vuggy reservoirs were established. Through the selection of the simulation unit, fluid flow type and parameter equivalent the triple media reservoir simulation model was established. Considering the practical application the model was resolved by the DKR decomposition conjugate grads method. Based on the fine reservoir description of Dsitrict IV of the Tahe oilfield the various space type were classified and combined together. The geology model of Unit S48 was constructed. Two typical single well model was established according to the geology and the dynamic phenomena. Finally the single well model and the Unit S48 were simulated by the triple media reservoir simulator. Via the local grid refinement and coarsening in the simulation good matchs were gained. Based on the results of the simulation the reserve distribution, percent of reserve produced in various space and the natural energy were analyzed. The fluid was storaged in the fractures and vugs mostly and more than 90% the produced oil came from the systems. The energy belonged to the active one. The results of simulation accorded with the fact and showed the validity and practicability the research and the simulator.

塔河油田奥陶系碳酸盐岩油藏的地质研究表明，其储层中发育着很多大型的溶蚀洞、缝，储层的平面展布呈现出极度的非均质性，形成了典型的缝洞型碳酸盐岩油藏，根据各种孔隙介质在储层中的组合，将储层分为了溶洞型、裂缝-溶洞型和裂缝型三类；研究表明溶洞储层的发育和构造位置、裂缝的发育、潜水面和风化面的位置等因素有关；多期充注的油气成藏模式导致了流体复杂的赋存状态，由此提出了所谓的&瓶子模型&，解释生产过程中油水界面的变化；特殊的储集空间类型和流体分布特征导致油田在开发过程中表现出很大的不确定性和含水变化的复杂性，为了合理的解释油气田开发过程中的动态特征，提出了&缝洞单元&的概念，并制定了&缝洞单元&纵横向划分的基本原则和依据及划分方法，并对&缝洞单元&进行了分类和评价；基于地质特征和流体在其中流动规律的研究，提出了缝洞型碳酸盐岩油藏的数值模拟综合解决方案，通过模拟单元的选择、流动类型和参数的等效，建立了三重介质油藏三维三相数值模拟模型，采用不完全LU分解预处理共轭梯度法进行了求解；在塔河油田4区精细油藏描述的基础上，将各种类型的孔隙空间进行了归类组合，建立了S48单元的地质模型；通过对油井生产动态进行分析研究，建立了两类和油井地质、生产动态相对应的单井模型；最后应用三重介质油藏数值模拟软件对单井模型和S48单元进行了数值模拟，通过局部加密和粗化等技术模拟流体流动规律，取得了很好的拟合效果；结合数值模拟结果，分析了各种介质中的储量分布、储量产出的百分比以及地层的能量，认为塔河油田缝洞型油藏中流体绝大多数储集于缝洞系统之中，所产出流体90%以上也来自于缝洞系统，其底水能量属于较充足的类型；模拟结果和油田实际情况符合较好，说明了地质研究和油藏数值模拟研究的正确性。

Practical microstrip antenna problems, such as the effect of superstrate on input impedance and radiation pattern are studied.

根据所得的新公式建立了多层介质覆盖矩形贴片微带天线的积分方程，并利用有效的数值技术求解出上述方程，得到了贴片上的电流分布，进而求出天线输入阻抗和辐射方向图。

A comprehensive review and expectation about researching status in quo and development trends of viscous flow numerical simulation technique are given in this paper and grids generation methods, numerical computation methods, turbulent model and moving boundary simulation methods are the emphasis study in the paper. On the basic of above job a mathematical model of simulation turbulent flow with free surface is established and triumphantly applied to numerical computation on 2D spillway and 3D spillway with frusta of brake.

本文针对粘流场数值模拟技术的研究现状和发展动态作了比较全面的回顾与展望，重点研究了网格生成技术、数值求解技术、湍流模型技术和动边界模拟技术，在此基础上建立了模拟自由面湍流场的数学模型，并成功地应用到二维溢流坝和带闸墩的三维溢流坝过坝水流的数值计算。

Based on numerical simulation flow after treatment methods and implementation. This paper drawing river ice jam thickness contour map, vertical water flow under the ice jam contour map as an example, the use of Surfer software described in detail various graphics rendering; Focused on the Surfer with VB programming software secondary development to achieve flow numerical simulation after treatment, showed that automatic change the data files to the Surfers;Introduced Active automation technology and Visual Basic Application Program Interface, and the interface technology will combinate VB powerful software development capabilities and Surfer software powerful mapping functions , achieve the key code and the mapping results map examples: under the ice sheet flow velocity field vertical contour map, three-dimensional wire-frame plans, such as flow field vector graphics, and dynamic display and output the graphics.

基于水流数值模拟后处理的方法与实现，本文以绘制河流冰塞厚度等值线图、冰塞下水流纵向流速等值线图为例，详细介绍了运用Surfer软件绘制各种图形的方法；重点阐述了用VB编程对Surfer软件进行二次开发实现水流数值模拟后处理，显示向Surfer数据文件自动转换的过程；介绍了Active自动化技术及其与VB应用程序的接口技术，并利用该接口技术将VB的强大软件开发能力和Surfer软件强大的绘图功能相结合，给出了实现该接口技术的关键代码以及绘制成果图件的实例：冰盖下流速场纵向流速等值线图、三维线框图、流场矢量图等图形，并输出图形与动态显示。

In the second part of the paper, the sport techniques of the flight elements was analysised in-depth theoretically by the movement technical structure:①the giant swing was first analysised in mechanics by applying the Kane's method, the dynamic equation of 5-link multi-body model was established, and the computer simulation software of the giant swing on the high bar was developed.

其次，作为单杠上飞行动作系统性研究的另一主要方面，本论文对飞行动作一般技术结构中的各技术环节进行了深入的理论分析：①着重对飞行动作准备阶段的回环运动技术进行了动力学分析，主要采用了多体力学理论中的Kane方法，建立了5环节人体回环运动的动力学方程，并应用计算机数值仿真技术研制开发了用于回环运动动力学分析的数值仿真软件，进而以动作实例对回环运动进行了数值仿真与误差分析，其所得到的数值仿真结果能够满足对人体回环运动的动力学分析和仿真要求；②对于飞行动作的撒手技术环节，本论文从人体环节相对运动角度，来分析撒手时人体质心的运动以及撒手时角动量参数，并列举了几种飞行动作撒手技术的基本力学指标；③关于飞行动作的空中技术，论文在总结了空翻转体动力学机理的研究成果基础上，对人体空中运动定量化问题进行了一般性描述，并进一步应用刚体动力学理论，着重建立起了描述空翻与转体技术之间定量化的关系，讨论了空翻转体运动的稳定性及其运动模式的转换问题，它对于定量地评定空翻转体技术以及今后对空翻转体动作进行数值仿真都具有理论上和实践上的重要意义；④关于飞行动作再握技术环节，本论文避免了以再握瞬时性的力学参数指标来描述再握技术特征的简单化途径，提出以再握下摆与回环下摆相对比的方法来研究再握技术，并以飞行动作再握技术的具体实例进行了对比分析，表明再握下摆技术相比回环下摆技术有着相当的困难性和复杂性，运动员对再握下摆过程中各环节的相对运动实施有效的控制，是连接高难动作以及顺利流畅地完成成套动作的关键。

The system has some advanced functions such as searching multiform NWF product,the change of west wind index on 500 hPa,the physical feature table of every station,the error and comparison of forecast capability of NWF,searching fax picture,and showing 3D picture,etc.

而对数值预报的释用又是整个业务数值天气预报系统的一个关键的组成部分。就大多数数值预报产品本身而言，虽然目前已经具有较高的质量，但由于分析误差和模式自身的误差，对局部地区的天气形势不可能预报得非常准确，因此我们不可能将任何数值预报产品直接用于天气预报，而通过发展数值产品的释用技术来制作气象要素预报是可行的。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。