支撑

By appending a supportboard hole for vertical column in the middle part of top beam, the height of supportboard around hydraulic cylinder is decreased.

在上横梁中间结构的立柱孔周围添加了支撑板；减小了中心液压缸周围支撑板的高度。

Two of our wheels are driven by rotating power system to made the cylinder rotate . The swinging rack is driven by a set of crankshaft swinging bar which is mounted on the frame and the swinging rack is supported on the frame.

在四个支撑滚轮中，其中两个传动轮由转动动力系统拖动使转筒产生转动；摆动架由一组曲柄摆杆机构来驱动，曲柄摆杆机构装在机架上，摆动架由轴承组件支撑在机架上。

This research is concentrated on the interactive behavior between the cold-formed steel wall stud and sheathing. Three kind of test specimens used in this study includes:(1) both stud and calcium silicate board are under compression;(2) the stud sheathed with calcium silicate board is under compression; and (3) the calcium silicate board supported by stud is under compression. Three different thicknesses of calcium silicate board and three different spacing of the connecting screw were adopted in the test. Totally, 36 specimens were tested in this research.

本研究乃针对冷轧型钢墙体立柱与外覆材产生束制的能力进行探讨，实验所采用的试体分为三种，具外覆材之墙体、具外覆材支撑之立柱、外覆材受压内含支撑之立柱，并配合不同厚度之矽酸钙板与改变不同螺丝间距进行互相比较，共进行了36组试验。

It was also found that the strength of FF specimen is close to the sumation of the strengths of FC and FS specimens with the same board thickness and screw spacing as FF specimen. As compared the test results with the research findings from Li [2]and Luo [3], It can be concluded that the failure mode of specimen is affected by both the sheathing thickness and the stud thickness. Different from this study, the failure mode of Li's test specimens is torsional-flexural buckling for most cases. The predicted values computed based on the AISI Specification seem to be conservative as compared to the tested values of FF specimens. Therefore, it is suggested that the effective length factor, K, can be taken as 0.5 to determine the wall stud assembly strength.

在三种不同试体组合分析时也发现，具外覆材支撑之立柱与外覆材受压内含支撑之立柱，两者之破坏强度相加，约等於具外覆材之墙体之破坏强度；试验结果与李岱真、罗浩之研究比较后，发现不同厚度之立柱与不同厚度之矽酸钙板之间束制关系明显影响强度之差异，且李岱真之试体破坏模式多为整体扭转-挠曲挫屈破坏，与本研究有较大差异；对於具外覆材之墙体与AISI预测值比较后，AISI规范预测值较保守，因此本研究有效长度系数建议采用0.5。

Main products: Pressure riveting screw, nut riveting pressure, pressure riveting nut -, Inserts into the nut, rose riveting nut, floating nut, ground-nuts, nut-squeezing, Spring screws, self-locking nut, positioning support columns, targeted marketing, sales support cards, in spring, the combination of screws, rivets hollow, as well as various Pressure riveting type of plastic fasteners, etc.!

主要产品有：压铆螺钉，压铆螺母，压铆螺母柱，镶入螺母，涨铆螺母，浮动螺母，接地螺母柱，挤压螺母柱，弹簧螺钉，自锁螺母，定位支撑柱，定位销，支撑卡柱弹簧销，组合螺钉，空心铆钉，以及各种塑料压铆类紧固件等！

A top located pole socket permits mounting full-range systems above the

在SUB-15和18的音箱定面，具有一个可安插标准音箱支撑杆的孔，用于支撑全频音箱。

This shock increases the vibrating force working on the concrete and finally causes the compaction of the blocks.

设计上增加了栈板的强制限位支撑，当向下运动时，栈板冲击限位支撑，冲击使激振力倍增，最终形成对砌块的振动压力。

In one form, the bracket is saddle shaped with depending legs that snap over a part of the valve body.

在一种形式中，支架是马鞍型的，具有支撑腿，支撑腿搭扣在阀体的一部分上。

The natural vibration period of structure,story drift, variation characteristics of story lateral displacement,stiffness,energy dissipation feature and investment-income of the three structural schemes of eccentric braced steel frame,knee braced steel frameand moment resisting steel frameare compared.

偏心支撑、隅撑支撑钢框架通过耗能梁段发生剪切屈服耗能，大震下既能提供足够的刚度，又能保证一定的延性，具有较强的耗能能力，是高烈度地震区理想的结构体系s。'〕。

A structure of steel bars raised on side supports to bridge over or around something; can display railway signals above several tracks or can support a traveling crane etc..

一种钢条式的支撑结构，它一般在某物的上方或周围；它能位于好几个路轨上方发出铁路信号，也能支撑一个起重机等。

I will endeavour to find you some assistance.

我尽力帮你找人帮忙。

At first I only know bruck is the idol of American younglings, afterwards I returned back to Taiwan ,even in Beijing last year ,I saw her poster everywhere, I was so surprised at her charm.

起初我只晓得布鲁克雷德丝是美国少男少女崇拜的偶像，后来回台湾，甚至去年在北京，居然也四处看见她的海报，才惊讶她的魅力之大。