撕裂强度

With only 2% chromium powder, the nano-composite tanning agent can thicken the leather by 124.5%, the shrinkage temperature reaches to 95 DEG C.; compared with a chrome tanned leather, a leather tanned by the nano-composite tanning agent has a tensile strength, peeling strength and elongation at break improved by 51.8%, 8.2% and 13.3% respectively, has no obvious stratification or sedimentation during over 12 months of storage period.

所述复合鞣剂只需配入2％的铬粉，就可使皮革增厚高达124.5％，收缩温度达到95℃以上；其鞣革相较于铬鞣革，革的抗张、撕裂强度分别提高了51.8％和8.2％，断裂伸长率也提高了13.3％，存放期12个月以上无明显分层和沉淀。

The nanocomposite was superior to the pure polymer in thermal stability , tensile strength and right-angle tearing strength.

纳米复合材料的热稳定性、拉伸强度和直角撕裂强度均比纯聚乙烯醇有很大提高。

Can improve vulcanizate tensile strength, tear strength, abrasion resistance and flex resistance to flexion and rubber processing easier, a small contraction

能提高硫化胶的拉伸强度、撕裂强度、耐磨性及耐屈挠性能，并使胶料加工容易，收缩小。

Disclosed are certain moisture curable prepolymers formed by the reaction of diphenylmethane diisocyanate with conventional polyether polyols to produce sealants and coatings exhibiting excellent combinations of physical properties; most notably high tensile strength, high tear resistance, and high elongation.

公开了通过二苯基甲烷二异氰酸酯与习用的聚醚多元醇反应形成的某种湿固化的预聚物，以生产显示杰出综合物理性质(最显著的高拉伸强度、高抗撕裂强度和高伸长度)的密封胶和涂料。

This experiment uses lime carbonate, kaolin clay and starch as filler, uses sorbitol, ethanediol and chitosan as hygroscopic agent, under without foaming and foaming systems conditions, study filler and hygroscopic agent affect on tear strength, tensile strength, moisture coefficient and gas permeability of this film, and research mechanics of ventilation and moisture-penetrability of experiment preparing PE film by SEM.

本实验以碳酸钙、高岭土和淀粉为填料，山梨醇、乙二醇和壳聚糖为吸湿剂，分别在无发泡体系和有发泡体系的PE薄膜中，研究填料和吸湿剂对聚乙烯微孔薄膜的撕裂强度、拉伸强度、透湿系数和透气性能的影响。

The grafting effect and mechanism was charac- terized by FTIR,The heat stability of unvulcanized and dynamical mechanical proper- ty of vulc- lcanizates of SBR and SBR-g- were tested by TG and DMA respectively. medium-resistance properties of SBR and SBR-g- vulcan- izates were also investigated.The results showed that addition of St accelerated GMA grafting onto SBR and control the decomposition of SBR. When the conditions were GMA/St/DCP was 8/4/0.3 and grafting temperature was 160℃.

结果表明，St对提高接枝率、抑制SBR的降解起到了积极的作用；SBR中聚丁二烯的α－H和双键共同参与了GMA/St熔融接枝反应；当SBR/GMA/St/DCP=100/8/4/0.3、接枝温度为160℃时，SBR的接枝率较高（23.78%），SBR–g–硫化胶的拉伸强度和撕裂强度比SBR硫化胶的分别提高了119%和27.4%；SBR–（GMA--co-St）未硫化胶的Tg比SBR未硫化胶的高，而耐热分解性能优于SBR未硫化胶；SBR–g–硫化胶在低温条件下的刚性增大、弹性降低、具有较低的内耗，在常温下的阻尼性能较高，但弹性性能保持较好；SBR–g–硫化胶的耐热稳定性以及耐非极性有机溶剂的性能优于SBR硫化胶。

In this paper, research on curing system of vulcanized silicone rubber aging tear strength after impact.

摘要本文主要研究论述硫化体系对硫化硅橡胶老化后撕裂强度的影响。

The product quality is soft, touch the hand feeling good, the color is diverse, being easy to wipe the dirty mark;Bear the oil resistant to cold and the anti- is aging, having to tear to pieces the strength with the high and flexible and good anti-, change to the temperature and can like with the anti- patience of the ultraviolet ray, constant color of constant quality.

产品质地柔软，触摸手感好，色彩多样，易于擦拭污垢；耐油耐寒并且抗老化，具用高弹性和良好的抗撕裂强度，对温度变化和紫外线的抗耐性能好，不变质不变色。

Firstly, take polyester short fiber, nylon short fiber and cotton powder short fiber for examples, a study was made on the influence of content and kind of short fibers on physical and heat aging properties of short fiber-CR composites. The experiment results showed that the rigidity of the composite increased as the content of the fiber increased, and the tear strength, the modulus at 20% in L direction also increased; thereinto, the reinforcement effect of nylon short fiber was the best, and the cotton powder short fiber was the worst.

第一，以聚酯短纤维、尼龙短纤维、棉粉短纤维为例，研究了短纤维的用量和种类对短纤维-氯丁橡胶复合材料力学性能、耐热性能及其溶胀性能的影响；结果表明，随纤维含量的增加，短纤维-CR复合材料的硬度不断增大；在L向拉伸时，撕裂强度、定伸应力不断提高；尼龙短纤维的补强效果优于其它两种，棉粉短纤维的最差；随纤维含量增加，短纤维-CR复合材料整体耐热老化性得到了极大提高，其中尼龙短纤维-CR复合材料的耐热老化性明显优于其它两种；随纤维含量的增加，短纤维—CR复合材料的耐溶胀性能明显提高；短纤维-CR复合材料的性能呈现明显的各向异性。

Based on the principle of BP neural network,a neural network model for predicting the properties of SBR compound was established by using the additional levels of several ingredients as the input variables and the corresponding tensile strengthes,elongations at break,tear strengthes and t90 as the output variables.

沈阳化工学院材料科学与工程学院，辽宁沈阳110142）摘要：根据BP神经网络原理，以SBR中的几种配料用量为输入变量，对应的胶料拉伸强度、拉断伸长率、撕裂强度和t90为输出变量，建立神经网络分析预报模型。

This one mode pays close attention to network credence foundation of the businessman very much.

这一模式非常关注商人的网络信用基础。

Cell morphology of bacterial ghost of Pasteurella multocida was observed by scanning electron microscopy and inactivation ratio was estimated by CFU analysi.

扫描电镜观察多杀性巴氏杆菌细菌幽灵和菌落形成单位评价遗传灭活率。