抗干扰的

A diagonal pull tipping-bucket self-recording flow meter based on volumetric method is introduced herein; which consists of tipping-bucket flow sensor, mechanical pulse generator and counter; of which the innovation is that the engine counter used commonly in the weaving industry is successfully applied in the flow measuring through the design of a new mechanical pulse generator .

介绍了一种基于翻斗法量水的自记流量测定仪，该测定仪构成主要包括翻斗式流量传感器、机械脉冲发生器和计数器3部分，其创新点在于，通过自行设计的新型机械脉冲发生装置，将在纺织行业普遍应用的机械式累计数器成功的应用于流量的测定中，该测定仪最大的特点是无需任何动力，抗干扰能力强，特别适合野外工作

Test results show the linearity of COCT is better than IEC 0.2 class limit, and is suitable to the applications, in which the voltages are higher than 220 kV, the COCT accuracy is almost not affected by the existence of neighbor phases. The temperature test result tells in the temperature range of 50 ℃ the error of COCT is less than 1%, much better than an uncompensated one 16%. And thus the effectiveness of COCT is verified.

试验结果表明：比较式光学电流互感器的线性度可达到IEC 0.2级要求；在光学电流互感器适用的220 kV以上电压等级应用场合，比较式光学电流互感器具有较好的抗干扰性能；在50 ℃温度变化范围内，普通光学电流互感器的误差变化量高达16%，而比较式光学电流互感器的误差变化仅有1%，证实了基于比较法的补偿方案的有效性。

The discussion covers: 1、By theoretical analysis on the measurement circuit of the piezoelectric accelerometer, a optimization design for charge amplifier is proposed which uses TL081 to replace a largenumber of discrete components. The design not only improve the integration of the circuit, but also have some extra merits, including smaller volume, lower consumption, less autoeciousness and stronger resistance to interruption. 2、Affiliated conditional circuit and filter to the devised charge amplifier, the signal is normalized and the noise ( generally, high frequency signal and DC signal) are restrained.

论文完成的主要工作如下： 1、通过对压电加速度传感器测量电路的理论研究，提出用TL081芯片取代大量的分离元件进行电荷放大器的优化设计方案，从而提高了电路的集成度，使其具有体积小、功耗低、寄生因素少和抗干扰性能强的优点。

The products of the project integrates first-class electronic devices of PHILIS ,ARM,IR,INFINEON , real-time operating system of embedded as well as high-reliability uC/OS-Ⅱ,CAN BUS and LIN BUS as a whole system . Through modular and standardized design, it reaches the international standards in the thermal radiation,over-current protection ,quakeproof, moisture-proof and interference prevention. Furthermore, the implementation of modular design in the software design as well as the independence among the modules leads to the perfect combination of hardware and software which certify for the high-performance smart power management and control system that achieve great breakthrough in power management of the vehicles.

项目简介：该项目产品把PHILIS、ARM、IR、INFINEON 等一流的电子器件、高可靠性的嵌入式实时操作系统μC/OS—II、CAN 总线、LIN 总线等集成一体，通过模块化、规范化设计，在散热、过流保护、防震、防潮湿、抗干扰等方面均达到国际标准的有关要求，同时在软件设计实行模块化，模块之间独立，这样使硬件和软件完美的结合在一起，形成高性能的智能电源管理与控制系统，从而使车辆的电源管理数字化实现了重大突破。

It is demonstrated that the frequency drift will break up the phase-locked state of the laser array and induce the spatial instability of the far-field intensity due to phase noise. It is also found that although the evanescent coupling between elementary lasers can restrain these effects to some extent, the restrainability is too limited to be effective when the frequency drift is relatively strong.

通过对耦合激光器阵列动力学方程的数值研究发现，频率漂移将破坏激光器阵列的锁相状态，并引入相位噪声，导致输出远场光强分布不稳定；研究还发现：倏逝波耦合能够对频率漂移的影响起到一定的抑制作用，但这种抑制只在频率漂移较弱时才有效，因此，如果将该阵列用于光束合成，加入相应的抗干扰措施还是很必要的。

Because of this special geographical condition, the economic development is resisted in many areas of Gansu province and it is obvious that the electrical framework is from weak to strong. construction cycle of the electrical network is long and there are many terminal transformer substations, moreover, there is uncertainty in electric power source construction and the demand of dynamic reactive power compensation in supercentral electic network is changing.All of these have provided a large development space for the application of RSVC in Gansu electric grid.

IEC61850实现变电站内不同厂家二次设备间的信息共享和互操作，为数字化变电站提供了极好的通信平台电子式互感器可以用数字信号的输出替代传统的模拟量输出，将使保护、测量、计度量更加准确，抗干扰能力大加强，减少了二次电缆；在线监测技术和智能化开关的出现使一次设备性能得到较大扩充，提高了设备的可靠性，降低了维修成本，减少了二次电缆。

Uses the automated control not only on the galvanization production line to be possible to raise the product manufacturing efficiency and to reduce worker's labor intensity, and has the very good economic efficiency and the social efficiency, galvanizes on the production line to be possible to realize the automated control using PLC, PLC has the reliability to be high, the compatibility is broad, has the correspondence function, the structure modulation characteristic, therefore how to use good PLC to become the galvanization production line automation control key, auxiliary to galvanized the automatic production line driving with PLC by the frequency changer to carry on the automatic control, had the structure to be simple, the programming was convenient, the operation was flexible, the use safe, worked stable, the perform reliably and the antijamming ability strong characteristic, was one kind of very effective automatic controlThe way, is galvanizes the production to realize, the low cost, the high grade automated production development direction highly effective.

在电镀生产线上采用自动化控制不但可以提高产品生产效率和减轻工人的劳动强度，而且有着非常好的经济效益和社会效益，电镀生产线上运用PLC则可以实现自动化控制，PLC具有可靠性高，适应性广，具有通信功能，结构模块化的特点，因此如何使用好PLC成了电镀生产线自动化控制的关键，用PLC辅以变频器对电镀自动生产线行车进行自动控制，具有结构简单、编程方便、操作灵活、使用安全、工作稳定、性能可靠和抗干扰能力强的特点，是一种很有效的自动控制方式，是电镀生产实现高效、低成本、高质量自动化生产的发展方向。

An approximative mathematical model of the temperature controlling system has been constituted and simulated with various controlling strategy, according to the demanded function of the running Microwave Heating Asphalt Pavement Regenerate Repairer. From the result of simulation, it suggests that FPID Controller, which is of superior anti-jamming capability, overmatches Ordinary PI Controller, Traditional PID controller and Integration Separation PID Controller in dynamic characteristic. Consequently, this simulation of model offers a kind of valid method for the constitution of complicated system.

根据沥青路面修复要求实现的功能建立了温度控制系统的近似数学模型，对系统先后进行各种控制仿真，通过仿真发现，系统中模糊整定PID控制算法的动态性能比PI、PID和可积分分离的PID控制的性能要好，且具有较强的抗干扰能力，为复杂系统建模提供了一个有效途径。

Using this distributed control system can not only improve the quality of rubber tires, but also obviously reduce worker' labor intensity, and it is an optimum way to realize automation of vulcanizing workshop.

该控制系统采用三层网络结构，包括管理层、协调层和控制层，并基于适应于工业现场的RS-485通信方式，保障了系统运行的可靠性及高的抗干扰能力；提高了轮胎的加工质量，并显著减轻了工人的劳动强度，成为实现硫化车间自动化的最佳途径。

Adopt an automation to control the labour intensity being able to improve the product efficacy and lighten a worker not only, and have very good economic returns and social benefits on electroplating production line, wielding PLC is that the automation controls , PLC has reliability height can come true , adaptability has communication function , the modularized characteristic of structure broadly on electroplating production line,therefore how to use good PLC to have become the key that the electroplating production line automation controls , use PLC to add up with frequency transformer carrying out autocontrol on electroplating automation production line bridge crane, Having the structure simplicity , the programming going to the lavatory , handling nimbly , using safety , job stability , strong characteristic of reliable and anti-interference ability of function, is one kind of effective autocontrol way , is that electroplating produces the direction realizing high-effect .

在电镀生产线上采用自动化控制不但可以提高产品生产效率和减轻工人的劳动强度，而且有着非常好的经济效益和社会效益，电镀生产线上运用PLC则可以实现自动化控制，PLC具有可靠性高，适应性广，具有通信功能，结构模块化的特点，因此如何使用好PLC成了电镀生产线自动化控制的关键，用PLC辅以变频器对电镀自动生产线行车进行自动控制，具有结构简单、编程方便、操作灵活、使用安全、工作稳定、性能可靠和抗干扰能力强的特点，是一种很有效的自动控制方式，是电镀生产实现高效、低成本、高质量自动化生产的发展方向。

With Death guitarist Schuldiner adopting vocal duties, the band made a major impact on the scene.

随着死亡的吉他手Schuldiner接受主唱的职务，乐队在现实中树立了重要的影响。

But he could still end up breakfasting on Swiss-government issue muesli because all six are accused of nicking around 45 million pounds they should have paid to FIFA.

不过他最后仍有可能沦为瑞士政府&议事餐桌&上的一道早餐，因为这所有六个人都被指控把本应支付给国际足联的大约4500万英镑骗了个精光。