成形模具

Above result revealed that multidirectional closed die forging of spiral bevel gear was feasible.

揭示了使用复动闭式模锻模具成形小锥角螺旋伞齿轮的可行性。

Over the technology analysis of terminal strip parts, punching forming scheme and die structure are determined, and which solves the technical difficuties.

通过对接线片零件工艺分析，确定了零件冲压成形方案和模具结构，解决了生产中的难题。

Gear axle to the shape of the craft and die design process works is first semifinished materials to forging temperature after heating system unburnt earthenware into account the type described in a certain temperature conditions, the need to blank out preheat, heating, thermal insulation; Use Moduan processes.

齿轮轴的成形工艺及模具设计的工艺工程是，先把坯料加热到锻造温度后再放入到制坯型腔内，在一定温度条件下，需要对毛坯进行预热、加热、保温处理；采用模锻工艺。

The lumped quality matrix and lumped dumping matrix are used to uncouple the group of simultaneous equations.

钣料成形是利用模具使钣料发生塑性变形成壳体零件的生产技术。

The continuous extrusion process of copper strip is simulated by use of DEFORM as FEM software,and the rigid viscid plastic finite element model of the process is established to unveil the metal deformed rule and optimize the tool structure.

采用DEFORM软件，模拟铜扁线的连续挤压成形过程，建立铜扁线连续挤压的刚粘塑性有限元模型，揭示金属的变形规律和优化工模具结构。

The alternant impact of high temperature and high stress on local region of the cavity is one of the main reasons causing die failure.

在叶片成形过程中，模腔局部高温和高应力的共同作用是造成模具过早失效的重要原因之一。

Harbin 150001, China）Abstract: Based on the mould features, the fluid mechanics models were founded. Integrating with the finite element method, the hydro-mechanical deep drawing of alumite LF6 was simulated. The alumite LF6 was formed by hydro-mechanical deep drawing, and the reasonable process parameters were obtained.

摘 要：根据模具几何特征，通过建立流体力学模型描述液体对板料单元的动态影响，结合有限元数值模拟技术对塑性差、难成形材料防锈铝LF6的充液拉深进行数值模拟，并进行实验研究，得到了防锈铝充液拉深合理工艺参数。

Based on the mould features, the fluid mechanics mode ls were founded. Integrating with the finite element method, the hydro-mechanical deep drawing of alumite LF6 was simulated. The alumite LF6 was formed by hydro -mechanical deep drawing, and the reasonable process parameters were obtained.

根据模具几何特征，通过建立流体力学模型描述液体对板料单元的动态影响，结合有限元数值模拟技术对塑性差、难成形材料防锈铝LF6的充液拉深进行数值模拟，并进行实验研究，得到了防锈铝充液拉深合理工艺参数。

During the formingoperation, the medium is pumped under pressure into the cavity on one side of thesheet to be formed and controllably released through a single or multiple portsfrom the other side, and then the pressure distribution on the blank can be variedspatially and as a function of time.

粘性压力成形技术(即VPF，Viscous Pressure Forming)是采用粘性物质作为传力介质，在板料两面通过介质同时施加正压或背压，在模具型腔中形成非等静压场，从而在板材表面不同区域产生不同的压力分布。

The experimental results indicate that on the condition of Ni/C ,Zr added,the clad layers are metallurgically bonded to the substrate with fine shape and free of pores and cracks.

在楔横轧模具钢55Mn表面采用同轴送粉CO2激光熔覆WE—TiCp／镍基合金复合粉末，在增碳、锆条件下可获得成形好、无裂纹、与基体冶金结合的熔覆层。

Singer Leona Lewis and former Led Zeppelin guitarist Jimmy Page emerged as the bus transformed into a grass-covered carnival float, and the pair combined for a rendition of "Whole Lotta Love".

歌手leona刘易斯和前率领的飞艇的吉他手吉米页出现巴士转化为基层所涵盖的嘉年华花车，和一双合并为一移交&整个lotta爱&。

This is Kate, and that's Erin.

这是凯特，那个是爱朗。