微热的

A micro hotplate array was made by incorporating several micro hotplates into a single chip as an integrated sensor array.

集成的阵列式的微传感器是当今传感器发展的一个方向，例如广谱气体传感器，该种传感器需要把多个微热板集成在同一个芯片，形成微热板阵列的器件形式。

An MHP based thermal vacuum sensor was designed in the supporting beams of 65 μm long and 21 μm wide, and the gas gap below micro hotplate of 0.5 μm. The micro sensor was fabricated successfully with surface micromachining technology.

设计了一种边长为93μm、四臂支撑的方形微热板结构的电阻真空传感器，支撑桥长65μm、宽21μm，微热板与衬底之间的气隙高度为0.5μm；采用表面微机械加工技术成功实现了该传感器的加工。

To study the characteristics of Micro hotplate based vaccum sensor at constant tern perature working mode, the influences of working temperature and dimensions on the working characteristics of MHP based thermal vacuum sensor at constant temperature was analyzed based on the thermal analysis of MHP.

研究了微热板的传热特性，从理论上分析了恒温模式下工作温度和结构尺寸对微热板电阻真空传感器工作特性的影响。

Sitting on the steps of micro-heat, watching the smiling faces of the vague shapes of light, listening to the river purl.

坐在微热的台阶上，看着灯光映着的笑脸，倾听着河水的潺潺声。

In this paper, infrared thermograph is applied in the thermal analysis and measurement of micro-hotplate of a gas sensor. The temperature distribution of small area of micro-hotplate is measured, which provide a reliable basis for the development of micro-sensor.

本文针对研制中的气体传感器的微热板，用红外热成像技术进行热测试和分析，获得气体传感器微热板的微小区域的温度分布，为传感器的研制提供了可靠的依据。

The synthesized PCU was then characterized by infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, small-angle X-ray scattering, and tensile strength measurement. The IR showed that the polymer synthesized by the above two methods both have the polycarbonate-urethane structure and the tensile measurement showed good mechanical performance of the polymer. The DSC and TGA data showed that there is an obvious soft-hard glass transition area, which indicated the existence of the micro-phase separation structure. The extent of the phase separation was affected by the ratio of starting materials, the molecular weight of PCD, and the polymerization method. The decomposition upon heating was observed in two steps. SAXS result showed that the radius (r_2), the distance between domains (d_2), and gyral radius (R_2) of hard segment micro-domain were fairly affected by the starting materials ratio and soft segment content.

IR结果表明两种方法合成的聚合产物均具有聚碳酸酯聚氨酯的结构；拉伸实验表明聚合产物具有良好的力学性能；DSC、TG结果表明，聚合物呈现出较为明显的软硬段玻璃化转变区，表明存在微相分离的结构，相分离的程度受原料配比、软段分子量、聚合方法的影响，其热分解分为明显的两个阶段； SAXS结果表明，聚合物原料配比、软段含量的变化对硬段微区回旋半径R_2，微区间距d_2，微区半径r_2影响不大其值分别为9.5(A|°、29、7.4，但对软段的微区半径及间距影响较大，随着软段含量的增大，软段微区的半径r1和间距d1都增大。

No entire nitrendipine crystals were observed visually in SEM photos. The results of X-ray diffraction and differential scanning calorimetry analysis indicated that the crystalline form of nitrendipine was highly dispersed in microspheres, so as amorphous state. The drug release rate of microspheres could be controlled with adjusting the ratio of solid dispersion carriers and retarding agents formulated. The agitation speed and temperature of the preparation process have distinct effect on micromeritic properties of microspheres. The release profiles of the microspheres were mainly affected by the stirring rate of paddle, the concentration of SDS and pH of dissolution medium. Cooling speed and time, however, have no evident influence on the drug release rate of the microspheres. The dissolution data showed that the mechanism of drug release from microsphers was mainly diffusion-controlled. The incorporation efficiencies of 3 batches sample were exceed 96. 8％, which implied that the current method was suitable for design sustained-release dosage form for poorly water-soluble drug.

在扫描电子显微镜下观察，在微球内外未发现尼群地平的完整结晶，X-射线粉末衍射和差示扫描量热试验结果也显示，尼群地平已经被高度分散在微球中；微球的释药速度可通过调整处方中固体分散体载体和阻滞剂的比例控制；制备温度和搅拌速度对微球的质量影响较大；溶出仪的搅拌速度，释放介质的浓度和pH对微球的释放有较大的影响；制备过程中的冷却速度和冷却时间对微球的释放行为影响不很明显；方程拟合的结果表明缓释微球的释药行为符合扩散机制；测定三批微球样品的包封率均在96.8％以上，表明该法适合于制备难溶性药物的缓释微球。

With the ground shaking, a line concerning life and death shows up to everyone.

5月12日，半夏，微热的天气，08年的那天，大地撼动，于每个人都是一段分界线，是关乎生与死的界线。

I first start the machine, running for a while, after the hand-off contact with CPU surface and found that only微温, there is no sign of overheating.

笔者先启动机器，运行了一会，关机后用手接触CPU表面，发现只是微温，没有任何过热的迹象。

The copolymer derived from the copolymerization in high capacity kettle were testified that copolymerization between AN and MMA occurred. The microcapsules in the films are distributed in the copolymer film matrix. The heat-absorbing temperatures and heat-evolving temperatures of the films are almost the same as that of the MOCT, respectively. In addition, the enthalpy efficiency of MOCT, the melting enthalpy and the crystallizing enthalpy rises with the contents of MOCT increasing.The decomposition temperature of copolymers in the films containing various contents of MOCT decreases with the contents of MOCT increasing.

采用30升聚合釜合成了丙烯腈—甲基丙烯酸甲酯共聚物，证实了丙烯腈和甲基丙烯酸甲酯发生了共聚反应；正十八烷微胶囊分散和镶嵌到了共聚物膜基体中；正十八烷微胶囊含量不同的共聚物膜的吸热温度放热温度与纯正十八烷微胶囊的吸放热温度基本相同；随着正十八烷微胶囊含量的增加，共聚物膜的热焓和热效率逐渐增加；共聚物膜中的共聚物的热稳定性温度随着正十八烷微胶囊含量的增加逐渐减小，共聚物膜的结晶度则有所增大。

With Death guitarist Schuldiner adopting vocal duties, the band made a major impact on the scene.

随着死亡的吉他手Schuldiner接受主唱的职务，乐队在现实中树立了重要的影响。

But he could still end up breakfasting on Swiss-government issue muesli because all six are accused of nicking around 45 million pounds they should have paid to FIFA.

不过他最后仍有可能沦为瑞士政府&议事餐桌&上的一道早餐，因为这所有六个人都被指控把本应支付给国际足联的大约4500万英镑骗了个精光。