得到

In the redispersable powders, WACER powder is excellent. When fine percentage of redispersable emulsoid powder is 1, toughness, adhesive performance of mortar have improved.(3) When MC was mixed into mortar, water-retentive performance, toughness, adhesive performance of mortar have improved and 28d dry shrinkage of mortar has reduced.(4) When AEA was mixed into mortar, dry shrinkage of mortar reduced and infiltration resistance has improved.(5) When cement-to-sand ratio is 1:2.5 , toughness of mortar is perfect.

2WACKER的VAE和551Z两种乳胶粉的效果较好，最佳质量掺量均为1%，对砂浆的和易性、韧性、粘结性能均有较大改善；(3)在干拌砂浆中加入MC保水剂后，砂浆的保水性提高，韧性得到改善，粘结性能也得到了增强，砂浆的28d干缩值也有所下降；(4)砂浆中加入AEA膨胀剂后，砂浆的干缩下降，抗渗性也有一定提高；(5)灰砂比为1：2.5是较为理想的，砂浆的和易性较好，韧性较好；(6)砂浆中加入掺合料可以使砂浆的韧性得到提高，但是会使砂浆的粘结性能下降。

Methods Starting from 2-chloro-4-nitrophenol and 2- pyridine hydrochlorid, 3-chloro-4-(pyridin-2-ylmethoxy) aniline was obtained via etherization and reduction. The obtained aniline coupled with N-(4-chloro-3-cyano-7-ethoxyquinolin-6-yl) acetamide to give 4-[3-chloro-4-(2-pyridylmethoxy) phenylamino]-3-cyano-7-ethoxy-6-N-acetylaminoquinoline. And then it was deacetylated, followed by reacting with4- but-2-enoyl chloride to yield the target compound neratinib.

以2-氯－4-硝基苯酚和2-氯甲基吡啶为起始原料，经醚化、硝基还原得到3-氯－4-（吡啶－2-甲氧基）苯胺，3-氯－4-（吡啶－2-甲氧基）苯胺与3-氰基－6-乙酰氨基－7-乙氧基－4-氯喹啉反应得到3-氰基－6-乙酰氨基－4-［3-氯－4-（吡啶－2-甲氧基）苯氨基］－7-乙氧基喹啉，3-氰基－6-乙酰氨基－4-［3-氯－4-（吡啶－2-甲氧基）苯氨基］－7-乙氧基喹啉去乙酰保护基后，与-4-二甲氨基－2-丁烯酰氯经酰化反应得到ner-atinib。

The exchange theorem of bases of closed regular fuzzy matroids is obtained with the help of "the exchange theorem of bases" of crisp matroids. Then,the relations between the fuzzy bases and the fuzzy circuits in closed regular fuzzy matroids are studied, and some necessary and sufficient conditions for some fuzzy independent set to be a fuzzy base; some fuzzy circuits from a fuzzy base, and some fuzzy bases from a fuzzy circuit are investigated.

根据传统拟阵的基交换定理，作者给出了闭正规模糊拟阵的基交换定理，得到了一系列结论，并在此基础上进一步研究了闭正规模糊拟阵的模糊基与模糊圈之间的关系，然后给出了闭正规模糊拟阵中某模糊独立集是模糊基、从一个模糊基得到一些模糊圈、以及从一个模糊圈得到一些模糊基的充要条件。

The method is realized by that polyether ether ketone is added into concentrated sulfuric acid to carry out sulfonation reaction, thereby obtaining sulfonated polyether ether ketone, then the sulfonated polyether ether ketone is dissolved in organic solvent, N, N (1)-Carbonyldiimidazole is added to stir for one to three hours, coupling agent is mixed for stirring the reaction for 1.5 to 4 hours, then inorganic crosslinking agent is mixed to react under the temperature of 50 to 80 DEG C. Proton conductors are mixed to continue getting the mixed solution of the sulfonated polyether ether ketone or the inorganic crosslinking agent or proton conductors under the temperature. Finally the proton exchange membrane for a direct methanol fuel cell is obtained by that the mixed solution of the sulfonated polyether ether ketone or the inorganic crosslinking agent or proton conductors is/are processed through membrane forming, drying and exuviation.

该方法首先将聚醚醚酮加入浓硫酸中进行磺化反应得到磺化聚醚醚酮；然后将磺化聚醚醚酮溶于有机溶剂中，加入N，N′-羰基二咪唑搅拌1～3小时后加入偶联剂搅拌反应1.5～4小时，再加入无机交联剂在50～80℃下反应，然后加入质子导体继续在此温度下反应得到磺化聚醚醚酮/无机交联剂/质子导体的混合溶液；最后将磺化聚醚醚酮/无机交联剂/质子导体的混合物溶液成膜，干燥，脱膜即得到所述的直接甲醇燃料电池用质子交换膜。

Life is full of fickleness, there is gain, there must be losing, you should know to cherish when you are gaining, learn to be relieved when you are losing, most people are greedy, if you want to gain more, would you like to lose?

人生变幻无常，有得到就会有失去，当你得到的时候你要知道珍惜，当你失去的时候你要学会释然。大部分人都是有贪念的，如果要得到更多，那么你是否愿意失去？

After the analysis it was concluded that the mean velocity fluctuations of the strata under Jidike Group in this working area could be divided into three zones: the minor velocity fluctuation zone in southern Dalaoba tectonic belt, the steep velocity fluctuation zone of the foreslope in middle YK structure and the zone from the bowtype thrusting tectonic belt in northern Qiulige to the minor velocity fluctuation zone in YK tectonic zone. On the basis of a good command of the regular patterns of the velocities in vertical and horizontal dimensions in the investigating area, the stack velocity was interpreted in a interactive mode by using the Depthteam Express modelling package of the Landmark system, converting the stack velocity into mean velocity by means of Dix formula. Based on the well drilling layering data, the velocity correction was executied to get the final corrected velocity model by using the Kriging Correction. By using this velocity model, we did the time to depth conversion and obtained the final depth structural map. After mapping by using the variable velocities, we came in for the display of the tectonic map of the seismic data.

经研究认为本区的吉迪克组以下层位平均速度变化可分成三个变化区域：南部大涝坝构造带速度变化平缓区；中部亚肯构造前缘斜坡区速度变化强烈区；北部秋里塔格弧形逆冲构造带前缘至亚肯构造带速度变化平缓区，在撑握工区速度纵、横向变化规律基础上，应用Landmark解释系统Depthteam Express速度建模软件包对迭加速度进行交互解释，利用DIX公式把迭加速度转换成平均速度，根据区内钻井分层数据采用克里金校正方法进行速度校正，得到最终校正后的速度模型，用此速度模型进行时深转换，得到最终的深度构造图，此次变速成图后，得到地震资料构造图显示。

Studied present measuring methods" advantages and disadvantages, and presented the necessity and importance of researching propellant transient heat transfer.2.according to 130 and aeronautic 90 rocket projectiles" structure, analysed and acquired physical and mathematical models for propellant transient heat transfer, also designed propellant temperature field simulation units for test.3.acquired discrete transient heat balance equation and temperature calculation program, and gave contrasting curves between experimental temperature values and program calculating temperature values as well as maximum errors and average square root errors between them.4.by programs based on the first class boundary condition, worked out temperature distribution in propellant temperature field simulation units at different time, analysed temperature field distribution law and main elements affecting heat transfer, acquired propellant mass weighted average temperature and one at the half position of propellant maximum thickness as well as maximum errors and average square root errors between them.5.established transient heat transfer mathematical model and temperature calculation program for the third class boundary condition, drew contrasting curves between temperature experimental values and calculation values and gave maximum errors and average square root errors between them, got temperature distribution in the simulation unit at different time and main elements affecting heat conduction, figured out propellant mass weighted average temperature and one at the half position of propellant maximum thickness as well as maximum errors and average square root errors between them.

分析了现有测试方法的优缺点，提出了研究推进剂瞬态导热的必要性和重要性。 2。根据130和航90两种火箭弹的结构，分析得到了推进剂传热的物理模型和数学模型，设计了推进剂温度场模拟实验装置。 3。得到了离散形式的瞬态热平衡方程和温度场计算程序，给出了实验温度与程序计算温度值的对比曲线及其最大偏差与均方差。 4。利用程序求出了第一类边界条件下、不同时刻推进剂温度场模拟装置中的温度分布，分析了温度场的分布规律和影响传热的主要因素，求出了推进剂质量加权平均温度和最大肉厚1／2处的温度时间曲线并给出了两者之间的最大偏差与均方差。 5。建立了第三类边界条件下的瞬态导热数学模型和温度计算程序，求出了温度实测值与计算值的对比曲线并给出了两者之间的最大偏差与均方差，得到了不同时刻温度场模拟装置的温度分布与影响导热的主要因素，求出了推进剂质量加权平均温度和最大肉厚1／2处温度及两者之间的最大偏差与均方差，讨论并确定了能代表130和航90推进剂温度的特征点的位置。

Methods In the first place,the mathematical model of the dynamical response of viscoelastic thin plates is established in physical space,then the fundamental equation in Laplace domain is obtained by using Laplace transformation.

首先在物理空间建立了粘弹性薄板动力响应问题的数学模型，然后利用拉普拉斯变换得到拉氏变换域的基本方程；利用基本方程的基本解，由边界元方法得到边界积分方程，并求得数值解；最后通过数值 Laplace 逆变换得到原问题的解。

Concretely, firstly with Timoshenko beams, the fundamental formulae of solutions of dynamical equations, boundary conditions and initial conditions have been transformed by Laplace transformation. Secondly, in the Laplace regions , we gain the analytical solutions of impact forces at the impact contact points, shear and maximum inverse stress of beams. Then, by using Durbin numerical inverse method, we gain the numerical solutions of Timoshenko beams under various restriction conditions. Moreover, the graphs about impact forces at the impact contact points, shear and maximum inverse stress of beams can be obtained too.

把Timoshenko梁力学模型动力学方程的基本解形式、边界条件以及初始条件进行Laplace变换，在Laplace区域得到了冲击接触处的冲击力、整个梁的最大弯曲应力和剪力的解析解，然后利用Durbin数值反演的方法得到了各种约束条件下的Timoshenko梁模型时间-空间的数值解，得到了冲击接触处的冲击力、梁各处的最大弯曲应力和剪力的曲线图。

Using Lewis-Riesenfeld theory, we obtain exact solutions of the time-dependent system, then we recover both n -pulse method based on time-evolution operator of the system and STIRAP method in terms of instantaneous eigenstates with the help of time-dependent gauge transformation.

利用含时规范变换理论得到系统的精确解，我们用时间演化算符同时得到文献中分别采用π-位相法和STIRAP方法得到的结果，因而更具有普遍性。

The absorption and distribution of chromium were studied in ryeusing nutrient culture technique and pot experiment.

采用不同浓度K2CrO4(0，0.4，0.8和1.2 mmol/L)的Hoagland营养液处理黑麦幼苗，测定铬在黑麦体内的亚细胞分布、铬化学形态及不同部位的积累。

By analyzing theory foundation of mathematical morphology in the digital image processing, researching morphology arithmetic of the binary Image, discussing two basic forms for the least structure element: dilation and erosion.

通过分析数学形态学在图像中的理论基础，研究二值图像的形态分析算法，探讨最小结构元素的两种基本形态：膨胀和腐蚀；分析了数学形态学复杂算法的基本原理，把数学形态学的部分并行处理理念引入到家实际应用中。