径中的

to reduce the impact of carrier frequency offset in ofdm system,this thesis designs a new carrier frequency offset estimation scheme for ofdm system.the carrier frequency offset estimation includes acquisition and tracking.we adopt variable step size adaptive algorithm.the acquisition range of the proposed algorithm is as large as one half of the overall signal bandwidth.through this method we can not only avoid the feedback by using forward error correction,but also reduce the times of complex multiplication in order to reduce the power consumption of the system.this algorithm not only has low complexity and fast convergence nut also can improve the demodulation performance of ofdm system.computer simulation illustrates the superior performance of the proposed algorithm with regard to estimation accuracy in both awgn channel and multi—path channel.

摘 要：为了减小正交频分复用系统受频率偏差的影响，在ofdm系统中设计了一种新的载波频偏估计算法。频偏估计包括跟踪和捕获两个阶段，文中采用变步长自适应算法来进行跟踪，这个跟踪算法的捕捉范围是整个信号带宽的一半。通过此方法，不但可以利用前向纠错的方式来避免反馈，而且可以缩减复数乘法的次数以降低计算复杂度和系统功耗。该方法运算复杂度低，并具有较好的收敛性，能改善odfm的解调性能。从计算机的仿真效果可以看出无论是在awgn信道上还是在多径信道上都表现出了卓越的性能。

The results suggested that compared with A-starch and maize starch, there are more quantities of impurities, such as protein, lipid and pentosan, in B-starch. B-starch prepared in the laboratory almost has the same compositions as three samplings, and accords with the reports of some documents too. Differing from the granules in A-starch, those in B-starch are smaller sized (1-10m)and oval shaped, and felted each other. The crystallogram of A- and B-starch are similar, i.e. A type. There is difference in granular distribution between A- and B-starch. The granular distribution of B-starch is anomalous and extensive (l~1259m).B-starch has bigger dilatancy and retrogradation, and smaller blue value, solubility, viscosity, gelatinization temperature and gelatinization enthalpy.

试验结果表明：跟玉米淀粉、A淀粉相比较，B淀粉含有的蛋白质、脂肪和戊聚糖等杂质数量多；实验室制备的小麦B淀粉中淀粉、粗蛋白、戊聚糖等含量均与文献的报道接近，也与在工厂采样的B淀粉相近；与A淀粉不同，B淀粉以小颗粒的淀粉为主，平均粒径1～10μm，颗粒形状呈椭圆形，同时颗粒和颗粒之间黏结紧密；B淀粉和A淀粉晶形结构相似，都为A型；B淀粉的粒度分布情况不同于A淀粉，其粒度分布规律性不强，分布范围也较宽，粒度在1～1259μm之间；B淀粉的凝沉值和膨润力大于A淀粉，而沉降体积、蓝值、溶解度、粘度、糊透光度、相变温度和热焓均小于A淀粉；杂质的含量对B淀粉性质的影响是明显的，随着杂质含量的增加，沉降体积、溶解度和透光度减小，膨润力增大，但是它们对凝沉值、蓝值和粘度的影响比较复杂。

The genetic analysis was carried out for 8 characters on 9 energy cane parents and their 20 combination crosses with the NCII mating design. The results showed that the inheritance of stalk biomass, brix weight, available stalk numbers and weight per stalk was subject to both additive gene effect and non-additive genes effect, but mainly controlled by non-additive genes. The inheritance of plant height, stalk diameter and brix was subject to both additive gene effect. The broad sense heritability (HB2) of stalk biomass and brix was over 50%, and those of brix weight were 33.7% at the seedling stage 54.4% at its ratooning stage, respectively , which means that the selection would be done better at the early stage in the sugarcane breeding program.

利用遗传交配设计对能源甘蔗9个亲本组配的20个组合、8个性状进行遗传分析，结果表明：地上部鲜重、锤重、丛有效茎数和丛重的遗传既受基因的加性效应也受基因的非加性效应所控制，但以非加性效应为主；株高、茎径和锤度的遗传主要是受基因的加性效应控制，地上部鲜重和锤度实生苗新植和宿根的H_B~2都在50％以上，而锤重的H_B~2分别为33.7％和54.4％，而且锤重和地上部鲜重母本gca方差都大于父本gca方差，说明能源甘蔗育种中母本选择的重要性。

For the aged aluminum alloys which generally contain disc/plate-shaped or rod/needle-shaped precipitates, a model has been established, from the viewpoints of thermodynamics, kinetics and strengthening theory, to relate quantitatively the yield strength to the size, volume fraction and aspect ratio of precipitates which all were analytical associated with the chemical compositions of alloys, aging temperature and aging time. This model has been experimentally proved to well predict the variation of yield strength with the evolution of disc/plate-shaped or rod/needle-shaped precipitates for present Al-4. 62wt% Cu-0.65wt% Mg alloy aged at 513K and Al-1. 12wt% Mg0.57wt% Si alloy aged at 463K, respectively, and the yield strengths simulated by this model were also found to be in well agreement with previously measured values for a series of aged Al-Cu binary alloys, AA6061 and Al-Zn-Mg alloys.

以析出热力学、长大动力学及强化理论为基础，研究了含有盘/片状、棒/针状时效析出强化相铝合金在时效过程中时效析出相尺寸、体积分数和长径比等参数的演变及其对合金时效强化效果的影响，给出了合金成分、时效变量与微观组织参数之间非线性的解析表达关系式，进而从微观结构—宏观性能相结合的角度出发建立起了具有盘/片状、棒/针状时效析出相铝合金的时效工艺—屈服强度量化模型，并将该模型应用于不同温度、连续不同时间时效下Al-Cu二元系列合金、6061铝合金和Al-Zn-Mg系列合金的屈服强度预测，得到了与前人实测值吻合良好的结果。

Uses in the paint, the printing ink, the varnished cloth coloration, the printing industrial used dye printing reserving agent, uses in the neutral cowhide glue in the matches industry the acidity, increases the gummy effect, the pharmaceutical industry serves as the adhesive plaster raw material, in addition also uses in the pigment zinc chrome yellow, the zinc acetate, the zinc carbonate, the zinc chloride and so on manufacture, the synthesis methyl alcohol catalyst, the synthetic ammonia sweetening agent, the glass and glazes the production, the pellet thin active zinc oxide (about particle size 0.1um) may serve as plastic and so on polyolefine and polyvinyl-chloride light stabilizers, the zinc oxide also uses in pressing, the photochemical catalysis, the electro-optic sensitively extremely, domains and so on coating, color television development.

用于油漆、油墨、漆布的着色，印染工业用的印花防染剂，在火柴工业中用于中和牛皮胶的酸性，增加胶粘效果，医药工业用作橡皮膏的原料，此外也用于颜料锌铬黄、醋酸锌、碳酸锌、氯化锌等的制造，合成甲醇的催化剂，合成氨的脱硫剂，玻璃和釉料生产，颗粒细的活性氧化锌（粒径0.1um左右）可用作聚烯烃和聚氯乙烯等塑料的光稳定剂，氧化锌也用于压敏、光催化、光电极、涂料、彩电显影等领域。

The present invention provides a screw cap capable of securing a necessary tightening torque even in a container having an inner plug with a small diameter tip and a safety cap with child resistance effect which cannot be opened merely by rotating operation.

本发明提供即使是具备前端细径的中栓的容器也能够确保所需的紧固转矩的螺纹式帽及具有仅通过旋转动作不能打开的儿童防护效果的安全帽。

The experiment and the research indicate that:(1) Through the Hot-Continuous-Rolling production technics under small reduction ratio of 4.04 and 5.08, the rectangular continuous-casting billet of 235×265mm can be used to produce big size steel stick of Φ140mm and Φ 125mm whose macrostructure and mechanical properties meet the standards, this technics is viable;(2) This rolling technics can make the deformation penetrate to the center of the billet by low temperture and low velocity and big roller diameter and large reduction quantity at every pass and optimum design and arrangement of rollers, which is the key of Hot-Continuous-Rolling technics under small reduction ratio;(3) The sending technics used in Xining Special Steel Co.,Ltd can not use waste-heat of billet adequately, but the sensitive temperature section of A1N or sulphides or inclusions separating out is avoided, creating a favorablecondition for insuring good surface quality of final rolled steel;(4) The Hot-Continuous-Rolling technics under small reduction ratio has a close relationship with the billet quality control and the hot sending process control and the cooling control after rolling.

通过实验研究表明：(1) 235×265mm矩形连铸坯分别采用4.04和5.08的小压缩比热连轧生产工艺，所生产的Φ140mm和Φ125mm的大规格棒材，其低倍组织和机械性能均符合标准要求，该工艺是可行的；(2)本实验所采取的低温低速、大辊径大道次压下量轧制工艺加上轧辊孔型的优化设计与配置，可以使加工变形渗透到铸坯的中心，这一点是实现小压缩比热连轧生产工艺的关键；(3)西宁特钢在红送过程中虽然铸坯余热未能得到充分的利用，但是有效地避开了A1N、硫化物的析出及夹杂物偏析的敏感温度区，为保证最终轧材良好的表面质量创造了有利的条件；(4)小压缩比热连轧生产与铸坯质量控制，热送过程控制以及轧后冷却控制密不可分。

In this system, we designed some new functions , for example, automatic judge running line, automatic judge running direction, automatic adjust the radius of locomotive wheel.

在这套系统中增加了诸如自动判断行驶路线、自动判断行驶方向、自动调整机车轮径等以往自动过分相装置所没有的新的功能，并根据列车行车安全的要求，制定了本系统的可靠性设计原则，重点加强了系统的可靠性设计。

On the other hand, the more important thing is because the urban housing is a kind of heterogeneity products.

另一方面，更重要的是由于城市住房是一种异质性产品。

Climate histogram is the fall that collects place measure calm value, cent serves as cross axle for a few equal interval, the area that the frequency that the value appears according to place is accumulated and becomes will be determined inside each interval, discharge the graph that rise with post, also be called histogram.

气候直方图是将所收集的降水量测定值，分为几个相等的区间作为横轴，并将各区间内所测定值依所出现的次数累积而成的面积，用柱子排起来的图形，也叫做柱状图。