强度控制

The gaseous impurities in the alloys were well controlled with the sum of C, N and O less than 500wppm. For the first time it was found the strong interaction between Cr-Ti-CON, which reduces the mobility of Ti and CON, enhancing high-temperature strength and the aging-hardening property, and keeping the cold-work induced hardening at higher temperature. Aging-hardening could increase the tensile strength of V-4Cr-4Ti by 30% and could be utilized at 00 C for better economical performane of a vanadium structure. Hydrogen release will occur for the alloys tensile loaded at room temperature, which will affect the safety of a vanadium structure due to the resulting dimensional instability. For hydrogen embrittlement, impact toughness and fracture toughness of the alloy showed higher sensitivity than the tensile test elongation,so the toughness should be used as a new standard for the assessment of the embrittlement. Vanadium alloys were easily oxidized in air.

合金的气体杂质含量得到有效控制，C、N、O总量低于500wppm；首次发现Cr-Ti-CON之间的强相互作用，它使Ti、CON的高温可移动性降低，提高合金的高温强度、增强时效强化特性、使冷加工强化保持到更高温度；时效强化可使V-4Cr-4Ti的强度提高30%，可在低温（00C）下应用，提高构件的经济性；室温下，钒合金在拉应力的作用下，存在着氢释放，带来部件使用中的尺寸不稳定性，影响构件安全；氢脆是钒合金聚变应用的一个关键问题，合金的冲击韧性和断裂韧性表现出比拉伸延伸率更强的氢脆敏感性，应作为评价合金氢脆行为的新标准。

New multi—objectives function (including mill stand longitudinal stiffness, distribution coefficient of loaded pressure between rolls, weight of mill stand, rolling power, rolls loaded gap profile changeability of bending force, transverse mill stand stiffness of bending force, transverse mill stand stiffness of rolling load) multi—constraints (including rolls strength, spindle strength, backup roll bearing load, minimum rollable gauge, roll surface temperature rise) rolls system parameters optimization model of four—high cold strip mill is established, and programme for mill structural illustration creation on the platform of AutoCad designs is compiled. With this as basis, rolls system parameters of Yichang thin strip corporation's 1219 cold mill are calculated using SUMT (subsequent unconstrained minimization technology).

本文建立了以板形和板凸度控制特性为目标的四辊轧机多目标函数（包括轧机纵向刚度、辊间压力分布系数、轧机重量、功率、弯辊力对轧机辊缝形状改变能力、对弯辊力的横向刚度、对轧制力的横向刚度）、多约束条件（包括轧辊强度、接轴强度、支承辊轴承负荷、最小可轧厚度、轧辊温升等）的辊系参数优化模型，以此模型为基础，利用惩罚函数法计算了益昌薄板公司1219冷轧机辊系参数，编制了AutoCAD平台下的轧机结构示意图自动图形软件。

The effect of different reaction conditions,such as catalyst concentration,molar ratio of reactants,reaction temperature,reaction time,on the coupling reaction of trioxane and methyl formate synthesizing methyl glycolate and methyl methoxy acetate using sulfuric acid as catalyst has been studied.Through the analysis for the yield of products and system pressure,and comparison with other different acidity catalysts,we considered that the activation of formaldehyde was the control step of reaction rate to the...

以硫酸为催化剂，研究了三聚甲醛与甲酸甲酯偶联合成乙醇酸甲酯和甲氧基乙酸甲酯的反应中，催化剂浓度、原料配比、反应温度、反应时间等条件对反应过程的影响，通过对产物收率和系统压力变化的分析，并结合与其它不同酸强度催化剂的对比，得到甲醛的活化是偶联反应的速率控制步骤，催化剂的酸强度决定其对甲醛的活化能力，是影响偶联反应的主要因素。

It is important to control the intensity of training load at the phase of altitude offspring.

下高原后的调整适应性训练要严格控制负荷强度，高原期间强度课的刺激程度越深，越需要延长调整和适应的时间。

Analysis of the characteristics of such damage to surrounding rock, the use of grouting and bolting control of surrounding rock stability and to strengthen the roof support strength, take full advantage of their load-bearing capacity of rock supporting the principle of a reasonable research grouting, anchoring rod supporting technology, including high water and quick-setting grouting reinforcement material between two groups, a total length of the roof using resin anchor bolts and high strength prestressed anchor to strengthen the small aperture and the two to help support longer anchoring resin bolting.

分析该类巷道围岩破坏特点，提出运用注浆及锚杆支护控制巷道围岩稳定、加强顶板支护强度、充分利用围岩自身承载能力的支护原理，研究了合理的注浆、锚杆支护技术，包括高水速凝材料注浆加固两帮、顶板采用树脂全长锚固高强度锚杆和小孔径预应力锚索加强支护及两帮树脂加长锚固锚杆支护。

It was found that the geometries of the studied materials were significantly affected by the ring size and intramolecular charge transfer. The HOMO level, LUMO level, and band gap of the studied model compounds were well controlled by the acceptor strength. However, the electronic properties of the studied polymer showed a significant different trend with the acceptor strength due to the geometrical transformation. The model compound of EDOT-TP and T-TP has the aromatic geometry but is transformed to the quinoid geometry for large intramolecular charge transfer. The small bond length alternation and large acceptor strength in the EDOT-BDP polymer also results in the smallest Eg of 0.7 eV among the studied polymers.

我们发现环的大小以及分子内电荷转移对结构有很大的影响，而小分子的HOMO、LUMO和能隙受到电子受体强度所控制，然而，高分子的电子特性与其构成分子却有明显不同的趋势，这主要是由於分子结构的转变，如小分子EDOT-TP以及T-TP因分子内电荷转移，使其高分子结构由aromatic转变成quinoid；而EDOT-BPP因其键长改变量小和良好的电子受体强度，使其能隙仅0.7个电子伏特。

In the test research of the most radical plane column-beam joint specimens are done, so the feasibility and the problem for this construction method could be discussed.

基于此，本文有针对性的对轴压比、剪压比及梁柱混凝土强度级差进行控制，设计并完成了7个按梁混凝土强度浇筑的钢筋混凝土平面框架节点的低周反复加载试验，通过量测各试件节点区水平箍筋以及贯穿节点的梁、柱纵筋在不同受力阶段的应变等，综合分析了各个试件的延性、耗能性及梁柱纵筋的粘结退化状况，考察了节点核心区采用梁混凝土浇筑后对试件综合抗震性能的影响。

The result notes that dynamic triaxial test preferably simulate the actual stress state of grading macadam, and Uzan model which considers the shear performance of material can better reflect stress states of grading macadam. Regression coefficients of the model obviously present nonlinear characteristic with moisture changed, and to further influence dynamic resilient module.More the module is larger, more diminishing rate of maximum tensile stress on pavement Bottom is smaller. To enhance draining function and strength, the gradation should been rigid controlled, and which the content of less than 0.075mm is controlled between 5～7％ and spring-back is controlled between200~300MPa are appropriate.

结果表明，动三轴试验较好地模拟了级配碎石层的实际受力状态；Uzan模型考虑了材料的剪切性能，更能反映了级配碎石在隧道路面中应力状态；随含水量的变化，Uzan模型中回归系数变化呈明显的非线性特征，进而显著影响级配碎石的动态回弹模量的变化；级配碎石模量越大，路面层底的最大拉应力减小率越小；为了兼顾到级配碎石层的排水渗透功能和强度，应严格控制级配，特别是0.075mm以下的含量宜控制在5％～7％，级配碎石的回弹模量宜控制在200～300MPa之间。

In this paper,the threshold of the automatic control system for the synchronous differential lock of off road vehicle is analyzed.With the cornering model of a three-axle vehicle,the response limit of the system is analyzed theoretically.Through the analysis of the mechanical strength and the engaging characteristics of the dog clutch,the maximum difference of rotation speed between two parts of the dog clutch and hence the upper activation limit of the system are calculated

本文阐述了越野汽车差速器同步锁止机构自动控制系统的组成和工作原理，分析了其控制门限；利用所建立的三轴汽车转向行驶运动模型，在理论上确定了越野汽车差速器同步锁止机构自动控制系统的响应界限；通过对同步锁止机构牙嵌式离合器强度和接合特性的分析研究，确定了牙嵌式离合器允许的最高转速差，从而确定了动作限值的上限

The results showed that (1) the intervention of preoperative pain education resulted in statistically significant reductions of worst pain intensity after surgery in experimental group compared to control group,(2) subjects in the experimental group experienced statistically significant reductions of pain interference in general activity, mood, and sleep, compared to control subjects,(3) the misbeliefs about pain management were significantly improved after surgery in experimental group compared to control group,(4) no statistically significant differences were found in the score of satisfaction with pain management, or amount of analgesics between the two groups.

研究结果显示：（1）实验组接受手术前疼痛卫教介入措施后，手术后最剧烈疼痛强度低於控制组达统计上显著差异。（2）实验组手术后疼痛对日常生活、情绪及睡眠的干扰程度低於控制组，达统计上显著差异。（3）手术后实验组错误疼痛处置信念的改善程度，与控制组达统计上显著差异。（4）手术后的疼痛处置满意度及止痛药使用剂量，两组间无统计上显著差异。

With Death guitarist Schuldiner adopting vocal duties, the band made a major impact on the scene.

随着死亡的吉他手Schuldiner接受主唱的职务，乐队在现实中树立了重要的影响。

But he could still end up breakfasting on Swiss-government issue muesli because all six are accused of nicking around 45 million pounds they should have paid to FIFA.

不过他最后仍有可能沦为瑞士政府&议事餐桌&上的一道早餐，因为这所有六个人都被指控把本应支付给国际足联的大约4500万英镑骗了个精光。