强化

Enchanters can make a variety of items as well as enchant weapons, armor and shields.

强化可以用来强化武器、盔甲、盾牌，需要很多手艺的制成品来强化物品。

The highest heat transfer coefficient for air flowing in the nine 3-D IFT with staggered arrangement fins is No9 tube. In the turbulent region, the heat transfer coefficient of No9 tube is a factor of 10.36 compared with smooth tube, and its thermodynamic performance coefficient is as high as 6.49; The average Nusselt number in the most superior 3-D IFT with staggered arrangement can be increased by about 1.04 times in the laminar flow, and 6.38 times in the transitional flow as compared with that in the smooth tube. The friction factor between fluid and tube wall can be 0.96 times in laminar flow, and 12.68 times in transitional flow as compared with that inside the smooth tube.

在进行实验的九根肋叉排三维内肋管中，换热最强的No9管与光管相比，在紊流区的换热强化比平均可达10.36倍，阻力增大比约为4.06倍，其热力性能系数高达6.49；在过渡流区的换热强化比平均可达6.38倍，同时阻力增大比约12.68倍；在层流区的换热强化比为1.04倍，而阻力增大比仅约0.96倍。

The literature on the surface treatment to the piston ring groove is few, in this case, in view of piston ring groove"s unique feature and the movement request, the article introduced the salt bath tufftride and the high-frequency quenching surface treatment"s wear test and failure reasons.

离子氮化技术可以实现对窄缝结构件的表面强化，只要空隙≥1mm，就能够产生辉光，可以实现对活塞环槽的表面强化；激光淬火技术可以通过采用斜入射的方法实现对活塞环槽的强化。

The study result of microwave irradiation enhanced coagulation process show that the process of irradiating with microwave firstly and then with coagulation is more efficiency to treat oil-containing wastewater than that with coagulation firstly and then with microwave, and when dying wastewater and landfill leachate are treated with microwave irradiation and coagulation process simultaneously, the treatment effects will become better. The study result of microwave irradiation enhanced Fenton oxidation process shows that, no matter what oil-containing wastewater, printing and dying wastewater and landfill leachate, better treatment effect will be achieved with microwave irradiation firstly and then with Fenton oxidation process, with which organic substance and chromaticity can be removed easily.

在微波强化混凝和Fenton氧化组合工艺研究方面，对微波辅助强化混凝工艺而言，处理含油废水时采用先微波预处理再混凝处理的效果较好，而处理染料废水或垃圾渗滤液时采用微波辐射与混凝同时处理的效果较好；对微波辅助强化氧化工艺而言，无论是含油废水、染料废水还是垃圾渗滤液，采用先微波辐射再Fenton氧化处理均可以获得较好的效果，特别适合于有机物的降解以及溶液色度的脱除。

For the aged aluminum alloys which generally contain disc/plate-shaped or rod/needle-shaped precipitates, a model has been established, from the viewpoints of thermodynamics, kinetics and strengthening theory, to relate quantitatively the yield strength to the size, volume fraction and aspect ratio of precipitates which all were analytical associated with the chemical compositions of alloys, aging temperature and aging time. This model has been experimentally proved to well predict the variation of yield strength with the evolution of disc/plate-shaped or rod/needle-shaped precipitates for present Al-4. 62wt% Cu-0.65wt% Mg alloy aged at 513K and Al-1. 12wt% Mg0.57wt% Si alloy aged at 463K, respectively, and the yield strengths simulated by this model were also found to be in well agreement with previously measured values for a series of aged Al-Cu binary alloys, AA6061 and Al-Zn-Mg alloys.

以析出热力学、长大动力学及强化理论为基础，研究了含有盘/片状、棒/针状时效析出强化相铝合金在时效过程中时效析出相尺寸、体积分数和长径比等参数的演变及其对合金时效强化效果的影响，给出了合金成分、时效变量与微观组织参数之间非线性的解析表达关系式，进而从微观结构—宏观性能相结合的角度出发建立起了具有盘/片状、棒/针状时效析出相铝合金的时效工艺—屈服强度量化模型，并将该模型应用于不同温度、连续不同时间时效下Al-Cu二元系列合金、6061铝合金和Al-Zn-Mg系列合金的屈服强度预测，得到了与前人实测值吻合良好的结果。

Law of agglomeration of aggrandizement of Ying Yifu mine is the aggrandizement that the aggrandizement that our country mixes the technical reformation of couplet law factory to should be directional; to do obeisance to ear law course with new-style and shunt-wound law should do obeisance to ear law dissolve to give new technology to be course of law of directional; agglomeration with double flowstone ash direction.

我国混联法厂的技术改造应以新型并联法为方向；拜耳法过程的强化应以双流石灰拜耳法溶出新工艺为方向；烧结法过程的强化应以富矿强化烧结法为方向。

In this paper,the surface roughness and residual stress of 1Cr11Ni2W2MoV stainless steel after laser shock peening and shot peening were tested and analyzed.The results show that laser shock peening samples have better surface quality and larger residual stress than shot peening samples.

对不锈钢材料1Cr11Ni2W2MoV进行了激光冲击强化和喷丸强化后表面粗糙度和残余应力测试分析，与喷丸相比，激光冲击强化对试件表面形貌和表面粗糙度的影响更小，产生的残余压应力更大。

Enhancement of the solid portion is highly variable, ranging from non-enhancing to ring-like to intense homogeneity.

实性成分的强化也是高度可变的，从无强化到环状到均匀强化都可以出现。

Based on the study of 1420 Al-Li alloy strengthened by a single precipitate, the author study strengthening contributions and their anisotropies of each phase and that of deformed textures to anisotropy in 2090 and 2090+Ce alloys strengthened by two precipitates, by reversion treatment and the exponential additional rule.

在研究单相强化的1420合金的基础上，通过回溶处理和指数叠加法研究了两相强化的2090及2090+Ce合金中各析出相对合金的强化贡献及其各向异性、形变织构对合金各向异性的贡献。

Some special features ofthe static mixer tube are demonstrated.4 An evaluation method of velocity-based disturbance effect of fluid field wasproposed. Qualitative results are obtained by using this method in fluid fielddesign and structure optimization of disturbing elements.5 Experimental models are made efficiently and accurately by RPM method.

主要内容包括： 1、总结了化工过程强化技术的现状和强化研究的途径，提出了紧凑式工业炉的概念，确定用静态混合式炉管进行局部强化。2、提出了静态混合式炉管应用的虚拟工程放大研究方法，指出研究中提高效率的关键是计算模型快速生成技术和实验模型的快速原型制造。3、对工业炉的关键部位——炉管，从材料成分、强度、制造等方面对静态混合式炉管的设计、制造进行了分析，与常规炉管对比，说明了静态混合式炉管的独特性和要求。4、应用快速原型方法，迅速、准确地得到了符合精度、强度要求的静态混合式炉管模型，产品的精度和强度完全符合要求，提高了模型制造效率。5、应用计算流体动力学方法，进行静态混合式炉管的工程放大研究。

On the other hand, the more important thing is because the urban housing is a kind of heterogeneity products.

另一方面，更重要的是由于城市住房是一种异质性产品。

Climate histogram is the fall that collects place measure calm value, cent serves as cross axle for a few equal interval, the area that the frequency that the value appears according to place is accumulated and becomes will be determined inside each interval, discharge the graph that rise with post, also be called histogram.

气候直方图是将所收集的降水量测定值，分为几个相等的区间作为横轴，并将各区间内所测定值依所出现的次数累积而成的面积，用柱子排起来的图形，也叫做柱状图。