应用软件

And, this disentombs the process that supplies chain demand is not met as software system carry out end and end, the ability that gets demand should make one of basic ability of company lowing department, such ability ensures the applied benefit of software system.

并且，这一发掘供应链需求的过程并不会随着软件系统的实施完毕而结束，获取需求的能力应该成为企业汀部门的基本能力之一，如此才能确保软件系统的应用效益。

In the amplifying design of the Guanghua offset printing machine PZ1740, the software has been applied to the design of the cam mechanisms for the rotary sheet transfer, grippers on-off and pressure on-off etc, and the desired results has been achieved for.

系统总结了印刷机械中凸轮机构的反求设计理论，研制了相应的计算机辅助设计软件，在光华胶印机PZ1740的放大设计中，应用于圆递纸机构、开闭牙机构和离合压机构等的凸轮机构的设计，取得了预期的设计效果，从而验证了理论的正确性和软件的实用性。

The static and dynamic characteristics of the beam of a gantry-type machining center are analyzed by means of ADAMS and ANSYS. Considering effect of gravity and cutting forces, the static deformation of the beam is obtained after calculating the interacting forces between the guide and the slide block by ADAMS. Moreover, the contact parameters of the guide surface are acquired by dynamic tests and parameter identification, then they are applied to the simulation model of the beam-slide box system, whose natural frequencies and modal shapes are achieved by modal analysis. Furthermore, the effect of changes of the contact parameters on the dynamic behavior of the beam-slide box system is also investigated.

对一种国产龙门式加工中心的横梁关键部件，采用机械系统多刚体动力学仿真软件ADAMS和有限元分析软件ANSYS进行了静动态特性分析；在考虑重力和切削力作用下，由ADAMS计算出导轨与滑块间的作用力，从而计算出横梁部件的静态变形；通过动态测试和参数辨识方法获得导轨结合面特性参数并将其应用到横梁滑箱系统整体有限元模型中，经过模态分析得到系统固有频率和各阶振型图，并进一步分析了结合面参数变化对横梁滑箱系统整体动态特性的影响。

The process of elastohydrodynamic analysis combined with compliance matrix was described,and an elastohydrodynamic calculation was done using ORBIT as tools with compliance matrix on conrod big-end bearing of a 4 cylinder in-line diesel engine.

介绍了结合柔度矩阵的轴承弹流分析流程，并针对某直列四缸柴油机连杆大头轴承，应用轴承设计软件OR-B IT结合有限元软件生成的柔度矩阵进行了弹流润滑计算分析。

Methods ①Human peptides of CYP450 enzymes and their proteinic sequence were analyzed by means of bioinformatics, and certain sequences were chosen and synthesized according to four indexes (Hydrophilicity Plot, Flexible Regions, Antigenic Index and Surface Probability Plot) after homology analysis by software Blast. The synthesized peptides were conjugated to keyhole limpet hemocyanin to increase antigenicity.

①利用生物信息学方法分析CYP1A2、CYP3A4及CYP4A11蛋白的序列，利用DNAstar软件中蛋白质的亲水性结构、柔韧区、抗原指数及表面概率结构指标选择多肽序列，应用Blast软件对所选序列进行同源性分析并合成多肽，与载体蛋白钥孔戚血蓝素偶联，免疫大耳白兔制备抗CYP1A2、3A4及4A11抗体。

Based on the Schaeffler diagram, a software that predicts the weld microstructure of dissimilar metal weldments is designed, and its application is illustrated with an example.

利用舍夫勒图，设计了一套软件，用它可以预测异种钢接头焊缝组织，并通过一个具体实例说明了该软件的应用。

Through the numerical solution of fluid field and resistance of the trimaran model in different water depth and forward speeds the computational results are compared with experimental data.

通过对不同水深和不同航速下船模周围流场的模拟和对总阻力的求解，并将计算所得结果与实验结果进行比较，表明了FLUENT软件对处理浅水域三体船粘性流场模拟和计算的有效性和准确性，为将CFD软件应用于三体船船舶性能研究的实用性和准确性提供了一些依据。

According to the function of distributed emulator, optical information processing and image multi-object tracking system, the following three aspects were emphasized in this dissertation. Firstly, a vast virtual terrain, ground radar models and canyons were created for the distributed emulator with modeling software Creator. The radars were driven to scan during emulating and the real time terrain code was sent to Radar module. Secondly, an optics channel simulating the optics camera of a virtual aircraft was implemented with simulating software Vega. The 2-D information got from the channel was translated and sent to multi-sensor information fusion system as an optics information source. Thirdly, the dissertation studied some motion estimation methods and analyzed the factors which influence the speed and the precision of the block matching algorithms. Then an improved block matching method was proposed for image multi-object tracking system and applied in the system combined with frame difference method.

论文根据多传感信息融合实验系统中的分布式飞行仿真系统、光学信号处理器和图像多目标跟踪系统三个子系统的功能要求，具体完成了以下三方面的工作：首先利用建模软件Creator创建分布式飞行仿真系统中的大面积地形、场景中的地面雷达模型和峡谷地形，并在仿真过程中实时驱动雷达模型的扫描，同时为后续雷达仿真模块提供实时地形编码；其次利用仿真软件Vega，在分布式仿真系统中为光学信号处理器设计实现了光学通道，模拟飞行器的光学摄像机的功能，并且对由此通道获得的目标二维光学信息进行转化处理，作为光学信息源发送给后续的多传感信息融合器；最后针对图像多目标跟踪系统，在研究图像分割运动估计算法的基础上，通过分析影响块匹配算法速度和精度的因素，改进了块匹配运动估计算法，结合差分法可应用到目标跟踪系统中。

Researching on the actuality of reverse engineering and the usage of it, in the authors opinion, it is required to process original data satisfying the requirements of CAD/CAM software; and it is worth to emphasize the research work on curve and surface construction methods, to develop relative data-process software.

通过对逆向工程当前研究现状及实际应用情况的分析研究，指出逆向工程当前需要解决的关键问题是对原始测量数据进行必要的处理，使其适应CAD/CAM软件造型的数据要求；同时对曲线、曲面构形方法也需加强研究，并开发相应的数据处理软件。

In order to separate tests from commercial testing tool adopted within the testing platform and make tests independent with the changes of the tested application, we make use of key word-driven software testing framework which is the most mature technology in the current software testing area to guide the implementation of Aegis.

为了实现将测试和自动测试工具以及应用程序本身的变化隔离开来，我们选择了当前最为成熟的软件自动化测试技术——关键字驱动的软件测试框架来指导自动测试平台Aegis的构建。

According to the clear water experiment, aeration performance of the new equipment is good with high total oxygen transfer coefficient and oxygen utilization ratio.

曝气设备的动力效率在叶轮转速为120rpm～150rpm时取得最大值，此时氧利用率和充氧能力也具有较高值。

The environmental stability of that world - including its crushing pressures and icy darkness - means that some of its most famous inhabitants have survived for eons as evolutionary throwbacks, their bodies undergoing little change.

稳定的海底环境─包括能把人压扁的压力和冰冷的黑暗─意谓海底某些最知名的栖居生物已以演化返祖的样态活了万世，形体几无变化。