应用层 - 网络例句 - 英语人，englisher

ABSTRACT :At present according to the Web application of J2EE terrace at logical is been divided into 4 F generally: Domain Model Layer, Presentation Layer, Business layer and Database layer.

当前基于 J2EE架构平台的 Web应用在逻辑上一般被分为四层：域模型层、表示层、业务层、数据层。

A series of theoretical and experimental studies on the microstrip patch antennas with dielectric superstrates is carried out systematically. Firstly, a comprehensive survey of the microstrip antenna technology and its theories are presented. Then, two analysis techniques, named as the spectral domain Green's function method and the spectral domain integral equation method are developed. The SDGF method is a simplified analysis technique, which takes advantage of the spectral domain immittance approach to find the dyadic Green's function for the stratified media, and obtains the complete closed-form formulas for radiation patterns, directivity, efficiency, gain etc. Some interesting calculated results are presented. The SDIE method is capable of determining resonant frequency, radiation characteristics, input impedance etc, for the covered microstrip patch antennas. Comparing with other full-wave analyses it reduced computation and mathematical labour remarkably. The singularities near the pole location of the surface-wave modes and the difficulty of the integral computation over infinite range of oscillating integrands are dealt with actively and documented well. Results predicted by the SDIE method agree extremely well with our experimental results for resonant frequencies of various superstrates. The superstrate effects on impedance and radiation characteristics also have been investigated experimentally so that the gap due to lack of measured data and computed results for multi-layered superstrate has been filled to some degrees and two useful observations have been achieved for weakening the resonant frequency shift and optimizing the microstrip antenna gain. As a meaningful application, the design and analysis of a 4×4 patch array are introduced.

实用微带天线普遍加介质覆盖层来防护热，物理损伤和环境影响，也可能在飞行或严酷气候条件下自然形成覆盖层本论文对带介质覆盖层的微带贴片天线系统地作了一系列理论和实验研究首先，对微带天线技术和理论作了全面的综述然后，发展了两种分析方法，称为谱域格林函数法和谱域积分方程法SDGF法是一种简化的分析技术，它利用谱域导抗法来求得分层媒质的并矢格林函数，并得出方向图、方向性系数、增益等参数的完整的闭式公式，给出了一些令人感兴趣的计算结果SDIE法能确定介质覆盖微带天线的谐振频率、辐射特性和输入阻抗等与其它全波分析方法相比，它明显减小了计算量和数学工作量已有效地处理了表面波模极点附近的奇异性和对振荡的被积函数的无限区间积分计算的困难对于不同覆盖层情况下的谐振频率，由SDIE法所预示的结果与我们的实验结果吻合得很好对于覆盖层对阻抗和辐射特性的影响也已作了实验研究这在某种程度上填补了缺少实验数据和计算结果之间的间隙，并得出了缓解谐振频率偏移和优化天线增益的两点有用的结论作为有意义的应用，介绍了一个4×4元矩形贴片天线阵的设计和分析。

This paper use H.264/AVC video transmission, which defines a set of three Profiles. Applications of the Baseline Profile include video telephony, video conferencing; applications of the Main Profile include television broadcasting and video storage; and the Extended Profile may be particularly useful for streaming media applications. H.264 proposes the idea of Network Abstraction Layer. The output of the encoding process of VCL data will be packeted into NAL units. The NAL will give the NAL units corresponding header information according the contents of the units.

而本论文在采用的多媒体压缩技术－H.264/AVC，其定义了三种不同的Profile：Baseline Profile著重在视讯电话，视讯会议等偏重即时传输等服务类别，Main Profile重点则是电视的播放以及影像储存的应用，而Extension Profile则是在串流媒体的播放上提供了较多的技术支援。H.264/AVC并且率先提出了网路提取层的概念，影像在视讯编码层完成编码之后，移交到网路提取层中，而网路提取层会依视讯编码层产生的编码内容将其封装近NAL units，并给予应有的标头资讯。

The finite element method is employed to analyze the shearing stress of the concrete bridge decks with waterproof layer.

应用有限元法，对设防水层的水泥混凝土桥桥面沥青铺装结构进行剪应力计算，分析了防水层的厚度、模量、泊松比、沥青混凝土铺装层厚度和模量等参数对结构层剪应力的影响，认为层间最大剪应力主要取决于面层厚度和防水层模量，相同的防水层模量通过增加面层厚度是降低层间剪应力的最有效手段。

This text passes and analyses network technology characteristic and the general demand for campus network at present and practical application, it accords with systematic model of campus network of the network application demand in the campus at present to probe into, have used "top-down design philosophy " in networking, have discussed that tightens mode, all netted modes, some netted structure modes, the third layer of network technologies of exchanging the mode, wait a moment to three swapper, division and some key equipment and development of application system of VLAN odd key technology problems go on research.

本文通过分析网络技术特点和目前校园网的普遍需求及实际应用，探讨符合目前校园网络应用需求的校园网系统模型，在网络建设中运用了"自顶向下"的设计思想，讨论了紧缩模式、全网状模式、部分网状结构模式、第三层交换模式的网络技术，对三层交换技术、VLAN的划分及一些关键设备和应用系统的开发等等几个关键技术问题进行了研究。

The geology research of carbonate reservoirs in Ordovician of Tahe oilfield showed that many large dissolved vugs and fractures were developed. The spread of the reservoir take on a very heterogeneous state. And the typical fractured-vuggy reservoirs was formed. According to the combination of the various spaces, the formation was divided into vuggy formation, fractured-vuggy formation and fractured formation. The research showed that development of the vug is relevant to the its position on the structure, the fractures, the water surface and the weathering surface. Multi-phase charge and recharge of the oil in the reservoirs resulted in the complexity of the fluid distribution. So the"Bottle Model"was brought forward to explain the movement of the water-oil contact. The special storage space and the complex fluid distribution lead to the unstability of the production and the complexity of the water cut. In order to explain the characteristic of the fracture-vug unit was brought forward and the basic principle and method of the partition of the fracture-vug unit was formed. The classification and evaluation of the units were performed according the reserve and energy. Based on the research of geology characteristic and the fluid flow in the reservoir the comprehensive numerical simulation plan of the fractured-vuggy reservoirs were established. Through the selection of the simulation unit, fluid flow type and parameter equivalent the triple media reservoir simulation model was established. Considering the practical application the model was resolved by the DKR decomposition conjugate grads method. Based on the fine reservoir description of Dsitrict IV of the Tahe oilfield the various space type were classified and combined together. The geology model of Unit S48 was constructed. Two typical single well model was established according to the geology and the dynamic phenomena. Finally the single well model and the Unit S48 were simulated by the triple media reservoir simulator. Via the local grid refinement and coarsening in the simulation good matchs were gained. Based on the results of the simulation the reserve distribution, percent of reserve produced in various space and the natural energy were analyzed. The fluid was storaged in the fractures and vugs mostly and more than 90% the produced oil came from the systems. The energy belonged to the active one. The results of simulation accorded with the fact and showed the validity and practicability the research and the simulator.

塔河油田奥陶系碳酸盐岩油藏的地质研究表明，其储层中发育着很多大型的溶蚀洞、缝，储层的平面展布呈现出极度的非均质性，形成了典型的缝洞型碳酸盐岩油藏，根据各种孔隙介质在储层中的组合，将储层分为了溶洞型、裂缝-溶洞型和裂缝型三类；研究表明溶洞储层的发育和构造位置、裂缝的发育、潜水面和风化面的位置等因素有关；多期充注的油气成藏模式导致了流体复杂的赋存状态，由此提出了所谓的"瓶子模型"，解释生产过程中油水界面的变化；特殊的储集空间类型和流体分布特征导致油田在开发过程中表现出很大的不确定性和含水变化的复杂性，为了合理的解释油气田开发过程中的动态特征，提出了"缝洞单元"的概念，并制定了"缝洞单元"纵横向划分的基本原则和依据及划分方法，并对"缝洞单元"进行了分类和评价；基于地质特征和流体在其中流动规律的研究，提出了缝洞型碳酸盐岩油藏的数值模拟综合解决方案，通过模拟单元的选择、流动类型和参数的等效，建立了三重介质油藏三维三相数值模拟模型，采用不完全LU分解预处理共轭梯度法进行了求解；在塔河油田4区精细油藏描述的基础上，将各种类型的孔隙空间进行了归类组合，建立了S48单元的地质模型；通过对油井生产动态进行分析研究，建立了两类和油井地质、生产动态相对应的单井模型；最后应用三重介质油藏数值模拟软件对单井模型和S48单元进行了数值模拟，通过局部加密和粗化等技术模拟流体流动规律，取得了很好的拟合效果；结合数值模拟结果，分析了各种介质中的储量分布、储量产出的百分比以及地层的能量，认为塔河油田缝洞型油藏中流体绝大多数储集于缝洞系统之中，所产出流体90%以上也来自于缝洞系统，其底水能量属于较充足的类型；模拟结果和油田实际情况符合较好，说明了地质研究和油藏数值模拟研究的正确性。

Ni-P-mCMC/mCS bipolar membrane was prepared from carboxymethyl cellulose modified with phosphorylated agent as a cation exchange layer and chitosan modified with glutaraldehyde as an anion exchange layer. The electrolysis cell was constituted by Ni-P-mCMC/mCS BPM as a septum for electrogenerating furfural alcohol and furoic acid.

以磷酸化试剂改性羧甲基纤维素钠制备了阳膜层，以戊二醛改性壳聚糖制备了阴膜层溶胶，将阴膜层溶胶流延于阳膜层上，制备了P-mCMC/mCS双极膜，而后以化学镀方法在阳膜层表面镀镍，制备了Ni-P-mCMC/mCS双极膜，并应用于成对电合成糠醇、糠酸。

The geology research of carbonate reservoirs in Ordovician of Tahe oilfield showed that many large dissolved vugs and fractures were developed. The spread of the reservoir take on a very heterogeneous state. And the typical fractured-vuggy reservoirs was formed. According to the combination of the various spaces, the formation was divided into vuggy formation, fractured-vuggy formation and fractured formation. The research showed that development of the vug is relevant to the its position on the structure, the fractures, the water surface and the weathering surface. Multi-phase charge and recharge of the oil in the reservoirs resulted in the complexity of the fluid distribution. So the"Bottle Model"was brought forward to explain the movement of the water-oil contact. The special storage space and the complex fluid distribution lead to the unstability of the production and the complexity of the water cut. In order to explain the characteristic of the fracture-vug unit was brought forward and the basic principle and method of the partition of the fracture-vug unit was formed. The classification and evaluation of the units were performed according the reserve and energy. Based on the research of geology characteristic and the fluid flow in the reservoir the comprehensive numerical simulation plan of the fractured-vuggy reservoirs were established. Through the selection of the simulation unit, fluid flow type and parameter equivalent the triple media reservoir simulation model was established. Considering the practical application the model was resolved by the DKR decomposition conjugate grads method. Based on the fine reservoir description of Dsitrict IV of the Tahe oilfield the various space type were classified and combined together. The geology model of Unit S48 was constructed. Two typical single well model was established according to the geology and the dynamic phenomena. Finally the single well model and the Unit S48 were simulated by the triple media reservoir simulator. Via the local grid refinement and coarsening in the simulation good matchs were gained. Based on the results of the simulation the reserve distribution, percent of reserve produced in various space and the natural energy were analyzed. The fluid was storaged in the fractures and vugs mostly and more than 90% the produced oil came from the systems. The energy belonged to the active one. The results of simulation accorded with the fact and showed the validity and practicability the research and the simulator.

塔河油田奥陶系碳酸盐岩油藏的地质研究表明，其储层中发育着很多大型的溶蚀洞、缝，储层的平面展布呈现出极度的非均质性，形成了典型的缝洞型碳酸盐岩油藏，根据各种孔隙介质在储层中的组合，将储层分为了溶洞型、裂缝-溶洞型和裂缝型三类；研究表明溶洞储层的发育和构造位置、裂缝的发育、潜水面和风化面的位置等因素有关；多期充注的油气成藏模式导致了流体复杂的赋存状态，由此提出了所谓的&瓶子模型&，解释生产过程中油水界面的变化；特殊的储集空间类型和流体分布特征导致油田在开发过程中表现出很大的不确定性和含水变化的复杂性，为了合理的解释油气田开发过程中的动态特征，提出了&缝洞单元&的概念，并制定了&缝洞单元&纵横向划分的基本原则和依据及划分方法，并对&缝洞单元&进行了分类和评价；基于地质特征和流体在其中流动规律的研究，提出了缝洞型碳酸盐岩油藏的数值模拟综合解决方案，通过模拟单元的选择、流动类型和参数的等效，建立了三重介质油藏三维三相数值模拟模型，采用不完全LU分解预处理共轭梯度法进行了求解；在塔河油田4区精细油藏描述的基础上，将各种类型的孔隙空间进行了归类组合，建立了S48单元的地质模型；通过对油井生产动态进行分析研究，建立了两类和油井地质、生产动态相对应的单井模型；最后应用三重介质油藏数值模拟软件对单井模型和S48单元进行了数值模拟，通过局部加密和粗化等技术模拟流体流动规律，取得了很好的拟合效果；结合数值模拟结果，分析了各种介质中的储量分布、储量产出的百分比以及地层的能量，认为塔河油田缝洞型油藏中流体绝大多数储集于缝洞系统之中，所产出流体90%以上也来自于缝洞系统，其底水能量属于较充足的类型；模拟结果和油田实际情况符合较好，说明了地质研究和油藏数值模拟研究的正确性。

The change law of salt in transition layer and its effects on salt in unsaturated zone and saturated zone under ponding and evaporating conditions in Lubotan, Shaanxi province were studied. Both laboratory experiment and numerical simulation have been done for three kinds of initial condition.

在国内外有关土壤水盐运移规律研究成果的基础上，应用陕西省卤泊滩综合治理和谐生态模式，分析了在蓄水和蒸发条件下，土壤饱和层与非饱和层之间的过渡层中盐分变化规律以及对土壤饱和层和非饱和层盐分的影响。

Considering many biophysics processes such as the atmosphere,hydrology,plant leaf N content et al.a multiple layer,two-leaf canopy model for predicting of mass transportation and energy exchange between plant canopies and the atmosphere has developed after dividing the canopy height into three layers,and the sunlit and shaded leaf area index was computed respectively at different layers through introducing a foliage clumping index,it is important to distinguish the spatial light distribution and so leaf photsynthesis.

多层—双叶模型对冠层上方碳通量的模拟：综合考虑农田水、热因子及叶片氮含量的非线性垂直分布对碳、水循环的影响，将农田按植株高度分为上、中、下三层，并通过叶片集聚指数计算阴、阳叶面积以区分叶片的空间分布受光状态，建立了均匀农田与大气间物质输送和能量交换的多层—双叶模型，对农田冠层上方基于光合—呼吸的碳循环过程进行了模拟应用研究。