应受的

The Indemnitee shall cooperate with and shall make available to the Indemnifying Party or its agents, all records and other material in the Indemnifies Party's possession reasonably required by it for its use in contesting any third party claim or demand.

受补偿方应与补偿方合作，如果补偿方为抗辩改第三方索赔或要求而合理要求受补偿方提供其所掌控的全部相关文件和其它资料，受补偿方应该提供此等文件和资料。

If the Indemnifying Party does not notify the Indemnitee within sixty (60) Business Days after its receipt of such notice that the Indemnifying Party disputes its liability to the Indemnitee under Section 6.1 or 6.2, such claim specified by the Indemnitee in such notice shall be conclusively deemed a liability of the Indemnifying Party under section 6.1 or 6.2 and the Indemnifying Party shall pay the amount of such liability to the Indemnitee on demand or, in the case of any notice in which the amount of the claim is estimated, on such later date when the amount of such claim becomes finally determined.

未经补偿方同意（如无正当理由不得拒绝同意），受补偿方不得对该第三方索赔或要求予以和解或妥协，除非判决或所提议的和解方案含有以下条款：受补偿方承担支付该第三方索赔的全部责任金额的义务；完全解除补偿方就该第三方索赔须承担的责任；没有对补偿方采取禁令或其它衡平法上的救济措施；和没有在其它方面对补偿方产生不利影响。受补偿方应与补偿方合作，如果补偿方为抗辩改第三方索赔或要求而合理要求受补偿方提供其所掌控的全部相关文件和其它资料，受补偿方应该提供此等文件和资料。

Throughout the test. The vertical position of the point of application relative to the horizontal surface is permitted to

整个测试期间应维持原来的受力点且受力维持在水平方向，在测试期间允许相关受力点的轴向位置到水平面的距离

The location and orientation control valves installed in accordance with design drawings and design H44X rubber disc check valves documents provided, the installation location should have sufficient operating space for installation, operation and maintenance; its location should be avoided in a vibration, humidity, susceptible to mechanical damage , there is strong electromagnetic interference, high temperature, severe temperature changes and corrosive gases in place; installation should be firm, smooth; installation position should enable the control valve of the upper part of the implementing agencies in the regulation of body, Figure 6-8 shows a straight stroke control valve a variety of mounting positions.

1控制阀安装位置和方位按照设计图纸和设计文件的规定，安装位置应具有足够的操作空间，用于安装、操作和维护；其位置应避免安装在有振动、潮湿、易受机械损伤、有强电磁干扰、高温、温度变化剧烈和有腐蚀性气体的场所；安装应牢固、平整；安装方位应使控制阀的执行机构在调节机构上部，图6—8显示了直行程控制阀的各种安装方位。

During the amending process, we should implement the principle of primacy of protecting the citizens' legal rights and emphasize studying and solving the following subjects regarding the systematical innovation and improvement in order to protect the citizens' legal rights effectively: protecting the citizens' legal rights should be the leading purpose of the legislation of administrative litigation; the principle of judicial ultimacy should be abided in the mechanism of solving administrative disputes; the scopes of accepting cases, participants and relieves in administrative litigation should be broadened; and both fairness and efficiency should be considered in the legislation of administrative litigation.

在修法过程中必须顺应行政法治发展的世界潮流，注重研究解决如下制度创新与改进的课题：行政争议解决机制应坚持司法最终性，应扩大行政诉讼受案范围、行政诉讼参加人范围和行政诉讼救济范围，行政诉讼立法应兼顾公平与效率，以更有效地保护公民合法权益。

Many structural deficiencies and mistakes were highlighted, which including excessive horizontal displacement in the ground, more severe damaged transition layer (the first masonry structure layer), ground with farraginous structure, and poor construction quality. Finally, lateral stiffness ratio of the second to ground story in masonry buildings with RC frame structure at the bottom will be optimized following difference of materials between the ground floor and the upper floors. The strength and the ductility of transition layer, as well as shear walls in the ground floor, are crucial to keep the building standing during large earthquake.

在介绍和总结了汶川地震中底框砖房的表现―底层过大的水平侧移、过渡层严重破坏或完全坍塌、底层严重破坏或房屋完全倒塌、上部砌体整体发生侧移、以及设计一和施工质量良好的底层抗震墙砖房&大震不倒&的基础上，得出以下结论和建议：在抗震设防地区应禁止使用部分底框砖房，地震中过渡层的实际受力情况与设计所采用的受力状态有明显的区别，规范应考虑砌体和钢筋混凝土材料的不同力学性质来制定上下层刚度比要求，明确对过渡层的延性和强度要求，明确该类结构抗震概念设计的具体措施。

Through designing of composition and structure of the bioactive graded coating,innerstress and its distribution in the coating were analyzed and calculated, the resultsshowed that when composition distribution coefficient n was 1.5, a reasonable stressdistribution could be got, that was at the beginning of deposition the suspension containingrichly BG granules was used so that a rich BG granules layer, a good transitional layerbetween BG layer at the bottom and the coating could be obtained at the titanium alloy side,the bottom of the coating; the stress value near the interface and surface and its character,pressure stress or tensile stress, were decided by the character of its composition itself.Changing composition distribution coefficient n could only change the variation tendency ofstress in the coating, but did not change the stress distribution rule in the coating. Thethinner the coating is, the sharper stress variation in the coating is, which does not mean thatthicker coating is better because the thicker the coating is, the little the permitteddeformation of coating is, so the coating thickness should be thinner, for example, about50μm for bending applications, but for applications only bearing pure shear stress, such asroot of tooth implant, the coating can be thicker little, for instance, about 80～100μm. The study on electrification characteristic and electrophoresis deposition of HAand BG granules in aqueous and non-aqueous solution system found that EPD almost didn'toccur in aqueous solution system. However, because HA granules take position charges inabsolute alcohol, a homogeneous EPD be carried out on the cathode titanium alloy slice, but taking negative charge in absolute alcohol the BG granules not be deposited on the cathode. A guided HA crystallizing, 100～300nm, on surface of the BG granules be realized by metathetical reaction, which cover BG granules with HA microcrystals and make the covered BG granules taking position charges in absolute alcohol, sequentially realize the EPCD of the BG and HA granules on the cathode, so it is feasible to make a titanium alloy/BG/HA bioactive graded coating by making use of EPCD technology. The corrosion experiment of rich boron bioglass coating and plasma spray coating showed that split phase, rich boron and rich silicon phase, occurred during its preparation. In basic medium the corrosion behavior of 〓 BG coating showed uniformity corrosion, the corrosion mostly occurred at rich boron phase area, therefore batch formula design of BGshould avoid the occurring of split phase. The corrosion appearance of plasma spray coatingappeared a non-uniform corrosion, mostly occurred at the edge of the laminated HA moltendrops, and emerged an accelerated corrosion tendency, which will easyly lead to corrosioncrackles extending to the interface and the happening of osmotic interfacial corrosion, thatmay be one of the major reasons leading to the coating cracking-off in the later period. Thetesting results of thermal expansion coefficient of 〓 and 〓BG showed the thermalexpansion coefficient of 〓 BG matched with that of titanium alloy better, and 〓 BG couldsinter with titanium alloy into densification enamel layer at low temperature (720℃).

将Ti6Al4V合金在1000℃下进行真空热处理会降低其力学性能，且合金内的V元素会向表面富集，因此，钛合金真空热处理和表面涂层的烧结温度不能过高，即应低于其相转变点；通过对生物活性梯度涂层的组成和结构的设计，分析和计算了梯度涂层内的应力大小和分布，结果表明：对于本研究，当成分分布系数n=1.5时，可以获得较合理的涂层力学性能，即在沉积开始时，采用富含BG颗粒的悬浮液，以便在钛合金侧获得同底层BG有良好过渡的富BG涂层；梯度涂层界面和表面的应力大小、性质由材料组成本身的性质决定，改变成分分布系数，只能改变涂层内应力变化的趋势；涂层的厚薄不影响涂层内的应力分布规律，但涂层越薄，涂层内的应力变化越快，但这并不意味着涂层越厚越好，因为涂层越厚，涂层允许的变形越小，对于应用于弯曲受力部位的涂层而言，涂层应薄一点为好(50μm)；而对于仅纯受剪切应力的部位，如牙根种植体，涂层可适当加厚(80～100μm)；通过对HA和BG颗粒在水溶液体系和非水溶液体系中的带电特性和电泳沉积的研究发现，它们在水溶液体系中很难发生电沉积；在无水乙醇溶液中，HA颗粒带正电，可在阴极钛合金片上发生均匀的电泳沉积，而BG颗粒则带负电荷；利用复分解反应法，可以制得100～300nm的HA，通过诱导HA在BG颗粒表面结晶，可对BG颗粒进行表面包覆，获得了被HA包覆的BG颗粒，改变了BG颗粒表面的带电特性，使BG和HA颗粒在无水乙醇中均带上正电荷，从而实现了HA和BG颗粒在阴极上的共沉积。

The act of Accepting money afterwards entrusted or agreed on beforehand carries the characteristic of the rights-money-deal,which should be undoubtedly regarded as a crime of accepting bribes.But on the other hand,the problem as to whether the act of Accepting money afterwards unentrusted or unagreed on beforehand totally accords with the essence of a...

事前有请托或者有约定的&事后受财&行为具备权钱交易的本质特征，应以受贿罪论处没有争议；但事前既无请托又无约定的&事后受财&行为是否完全符合受贿罪的本质特征，应根据刑法的规定，依照罪刑法定原则，具体情况具体分析。

The foreign materials in the coal may damage the belt feeding, thus dandruff comb shall be installed on the top of the coal receiving hopper of the tipper.

a。带式给煤机作为翻车机受煤斗配煤用，煤中的杂物可能造成带式给煤机的损坏，在翻车机受煤斗上部应装有篦子，翻车机翻卸完煤后，运行人员应将留在篦子上的杂物捡出，如果将杂物捅进煤斗则会造成皮带的损坏和堵煤，影响卸车。

The head of audit group shall call the members of audit group to discuss and comprehensively evaluate the matters discovered in the audit process before the last meeting. While the non-conformity items are made up, it shall be reported to auditee after being confirmed and agreed by the head of audit group.While the dispute regarding the non-conformity item occurred between the auditor and the head of audit group, audit shall comply with the arrangement of the head of audit group at the site.

审核组长应召集审核组成员对审核过程中的发现在末次会议前进行讨论并综合评价，确定构成不符合项时，应经审核组长确认同意后，方可向受审核方提出，当审核员与审核组长就不符合项产生争议时，审核员现场应服从审核组长的安排。

However, as the name（read－only memory）implies, CD disks cannot be written onorchanged in any way.

然而，正如其名字所指出的那样，CD盘不能写，也不能用任何方式改变其内容。

Galvanizes steel pallet is mainly export which suits standard packing of European Union, the North America. galvanizes steel pallet is suitable to heavy rack. Pallet surface can design plate type, corrugated and the gap form, satisfies the different requirements.

镀锌钢托盘多用于出口，替代木托盘，免薰蒸，符合欧盟、北美各国对出口货物包装材料的法令要求；喷涂钢托盘适用于重载上货架之用，托盘表面根据需要制作成平板状、波纹状及间隔形式，满足不同的使用要求。