工作值

The main jobs of this paper are as followed: 1 The reuse of the frame design technology for aircraft assembly fixtures is researched. a frame line part library is built with the templet driven technology, the reuse of the frame line part come true by the tools for instantiation and instance modification. The design resources are effectively used, some repeating work is cut. 2 Two methods to obtain the assembly feature are proposed: the straight way by the Enumeration method and the indirect way by project features to the assembly plane. All of the assembly features of the frame and the adjustable bearings are obtained by these two methods which makes the frame automatic assembly technology for aircraft assembly fixtures come true. 3 The frame automatic assembly technology aircraft assembly fixtures based on assembly features is researched. A binary tree assembly model is used to express the assembly information of the frame for aircraft assembly fixtures, the automatic assembly between the frame, the aircraft and the adjustable bearing is completed within the three steps: distribute, obtain and evaluate assembly feature. Finally, the efficiency of the frame assembly design is proved. 4The frame interpart modeling technology for aircraft assembly fixtures is researched, the intersection methods are concluded and the arithmetic of the single-cut, double-cut and inter-cut intersection is proposed, the interpart fast modeling of the frame design for aircraft assembly fixture come true. 5Based on the researches mentioned before, a sub-system of frame fast design for aircraft assembly fixture is developed on CATIA. The sub-system is used to design the aircraft assembly fixtures in a large aeronautics corporation and make a good- effect.

论文的主要工作如下： 1研究了飞机装配型架骨架设计重用技术，在总结归纳骨架线框结构类型的基础上，应用模板驱动的方法建立了骨架线框库，通过骨架线框零件的实例化和离线编辑实现骨架线框的重用，有效利用设计资源，减少重复劳动； 2提出穷举几何对象的装配特征直接获取方法，遍历零件模型的几何对象，从中捕捉所需装配特征，该方法简捷、高效；提出向装配面投影的装配特征间接获取方法，该方法在现有特征基础上生成装配特征，解决了部分装配特征难以直接获取的问题； 3研究了基于装配特征的飞机装配型架骨架自动装配技术，采用一种二叉树装配模型表达骨架的装配关系，并通过装配特征的分配、获取和赋值三个步骤，实现了骨架分别与飞机产品和可调支承的自动装配，避免了繁琐的人工交互操作，提高了骨架设计的效率和规范化程度； 4研究了飞机装配型架骨架零件间建模技术，在总结归纳骨架元件相贯处理方式的基础上，提出了骨架元件单剪切相贯、双剪切相贯和互剪切相贯的实现算法，简化了骨架相贯处理的过程； 5基于以上研究，在CATIA平台上开发了飞机装配型架骨架快速设计子系统，并应用于某大型航空企业的装配型架设计，提高了设计效率和设计质量。

The analysis results from gear vibration signals show that the fault diagnosis method based on intrinsic mode singular value decomposition and support vector machines can extract fault features effectively and classify working conditions and fault patterns of gears accurately even when the number of samples is small.

对齿轮振动信号的分析结果表明，即使在小样本情况下，基于内禀模态奇异值分解和支持向量机的故障诊断方法仍能有效地识别齿轮的工作状态和故障类型。

The stealth warplane for the microwave radar usually have complicated structures with the coating of wave absorption. On the base of calculation and modeling of the geometrical structure of the warplane in real size, the HF RCS of the air crafts under two different polarizations in different direction have been calculated with the FDTD. The result shows that the above mentioned stealth warplane have the obvious characterstics of frequency resonance, polarization and the relatively large RCS in HF Band 10-30dBm2, which can be used as the theoretical reference for selection of working frequency for sky wave OTH Radar and it also means that the sky wave OTH radar has good capability of anti-stealth targets quantitatively.

对微波雷达具有隐身作用的飞机，其形体较为复杂且表面涂敷有强吸波材料在对一种具有隐身几何外形结构实际尺寸飞机进行计算建模的基础上，文中采用FDTD技术得到了两种极化状态下该飞机无涂敷时不同方向上的短波雷达截面RCS值其结果显示了这种隐身几何外形飞机在短波波段有明显的频率谐振特性、极化特性和较大的RCS10-30dBm2，可为天波超视距雷达在选择工作频率时提供理论参考，并定量地说明天波超视距雷达具有较优的反隐身目标能力

The I-V curves of the power SITH exhibit reverse snapback phenomena, and even turn to the conducting-state, when the anode voltage in the forward blocking-state is increased to a critical value.

当工作在正向阻断态的阳极电压增大到某一临界值时，静电感应晶闸管的I-V曲线呈现出反向转折特性，甚至转向导通态。

The primary studying works and characteristics:1 To summarize reinforcing theory of cement mixing pile composite foundation2 To analyze the primary mechanics characters and changing rules of cement mixing pile, based on analysis of test data both indoor and outdoor.3 To discuss siding frictional resistance, ending resistance, ultimate bearing capacity of simple mixing pile and effectiveness factor of grouped piles, loading ratio of soil between piles under cushion cap of grouped piles and stress ratio of pile and soil and so on, and use many computation method and experimentation method to ensure bearing capacity of mixing piles composite foundation.4 To point out and analyze eight sides flaws and problems of the bearing capacity calculation method of mixing pile compositefoundation which ensured by national and normative method/ formula.5 To apply test results of loading tests and a few settlement observation data, use gray theory to predicate ultimate bearing capacity of deep mixing piles, actual example demonstrate engaging between theoretical predicted value and actual value.6 To apply groovy layerwise summation method to discuss entity piles method, double foundation method, equivalent layerwise summation method and consolidation theoretical method and so on, especially by combination of engineering example, use FEM to calculate or discuss the settlement and changing rules of composite foundation.7 To discuss problems of critical length of composite foundation by combination of engineering example and numerical analysis method, and analyze the contrast of critical length between simple pile load and most area load of composite foundation, not only critical length of composite foundation is relative to modulus ratio between piles and soil, but also upside load distribution area of composite foundation.

主要的研究工作与特色为：(1)总结了水泥搅拌桩复合地基的加固原理；(2)在对室内外试验资料进行统计分析的基础上，系统分析了搅拌桩水泥土的主要力学特性及其变化规律；(3)探讨了搅拌单桩的侧摩阻力、端阻力、极限承载力及群桩效率系数、群桩承台下桩间土荷载分担比及桩土应力比等，提出用多种计算方法并结合试验方法来综合确定搅拌桩复合地基的承载力；(4)明确指出和分析了按国家有关规范的方法确定搅拌桩复合地基承载力所存在的八个方面的缺陷与问题；(5)利用过去没有加载至破坏阶段的载荷试验成果和较少的沉降观测数据，尝试了用灰色理论预测深层搅拌桩的极限承载力，实例表明理论预测值与实测值吻合较好；(6)在常规分层总和法的基础上，探讨了复合地基沉降计算的实体墩基法、双层地基法、等效作用分层总和法、固结理论法等，特别是结合工程实例，用有限元数值计算等方法计算和讨论了搅拌桩复合地基的沉降及其变化规律；(7)结合工程实例，用数值分析方法探讨了复合地基临界桩长的问题，指出和分析了单桩荷载下的临界桩长与复合地基大面积荷载下的临界桩长存在很大的差别，复合地基的临界桩长不仅与桩土模量比有关，而且与复合地基上部荷载分布面积有关。

Germany have a special "property valuation", and their working procedures and valuation fees, there are stringent regulations.

德国有一个特殊的"物业估值"，其工作程序和估价费，有严格的规定。

Research focused on staghorn powder Alcalase degradation of suitable conditions, including temperature, pH, the amount of enzyme, at the end of the concentration and extraction time.

研究工作主要集中在寻找Alcalase降解鹿角粉的适宜工艺条件，包括温度、pH值、酶用量、底物浓度、提取时间。

The operation voltage was applied as a rectangular pulse of 50 kV amplitude and 3.75 μs width, and the antiferroelectric adjuster was made up by lead zirconate stannate titannate ceramics.

工作电压是幅值为50kV、宽度为3.75μs的方型脉冲电压，反铁电调节器由锆锡钛酸铅反铁电陶瓷组成。

In order to solve the problem of serious fluctuation of starting current in traditional control scheme, the author puts forward a new kind of starting method which can limit voltage value to achieve the goal of reducing fluctuation of the current by using zero voltage vector during the stage of starting.

文章分析了异步电动机直接转矩控制系统的工作原理及起动过程，针对传统控制方案存在起动电流波动严重的问题，提出一种通过在起动过程增加零电压矢量的方法限制电压值，达到减小电流波动的目的，对此进行了仿真研究，仿真结果表明该方法是有效的。

The main content of this thesis is as follows: 1The structures of EPS are analyzed. The main components of EPS are introduced in detail. Then the distributed torque in EPS is analyzed and the control system model is set up. 2Three control modes are discussed and the control strategy of EPS is studied in detail. Three principal modules in the control strategy are discussed—the predicted module which predicts motor rotational speed and steering rotational speed, the power-assistant module and the return control module. 3The assistant torque curves of the motor are designed by using the B-spline, so that any kind of custom-built assistant torque curves can be designed according to different kinds of automobiles. 4The hardware frame of EPS is studied. The developed controller based on 8-bit MCU MC68HC908MR8 is introduced and many related circuit units are designed, including the control circuit, the driver control circuit and so on. The software structure is discussed, then the steering control program flowchart is given.

本文的主要工作有： 1分析了EPS 的总体构成，对EPS 的各个部件作了详细的介绍，并在此基础上分析了EPS 的受力情况，建立了控制系统模型，并研究了EPS 的安全性能； 2讨论了EPS 的三种控制方式，提出了控制策略，并讨论了其中三个关键模块的作用：预估模块包括对电机转速和方向盘角速度的预估，助力控制模块以及回正模块； 3用B 样条插值方法进行EPS 助力曲线的设计，可按照用户的要求设计任意形状的助力曲线，以满足不同车型和不同用户的要求； 4研究了控制系统的硬件结构，以MC68HC908MR8 为核心设计了控制器，详细讨论了控制器的控制电路、驱动电路等；设计了控制系统的软件，给出了控制程序流程图，并对要点进行了详细的说明。

On the other hand, the more important thing is because the urban housing is a kind of heterogeneity products.

另一方面，更重要的是由于城市住房是一种异质性产品。

Climate histogram is the fall that collects place measure calm value, cent serves as cross axle for a few equal interval, the area that the frequency that the value appears according to place is accumulated and becomes will be determined inside each interval, discharge the graph that rise with post, also be called histogram.

气候直方图是将所收集的降水量测定值，分为几个相等的区间作为横轴，并将各区间内所测定值依所出现的次数累积而成的面积，用柱子排起来的图形，也叫做柱状图。