层化

This paper expounds the oxyacetylene flare overlaying welding technology of tungsten carbide rod made to be metal matrix carbide ceramal compound overlaying welding layers.

介绍碳化钨条氧乙炔火焰堆焊制备金属基碳化物陶瓷复合耐磨堆焊层的工艺方法，结合碳化钨条氧乙炔火焰堆焊工艺过程、堆焊层性能特点、泥沙磨损实验结果及显微组织形貌，分析讨论了热源性质对堆焊层性能的影响以及复合耐磨堆焊层的抗泥沙磨损特性。

With the electrical connections at the top and bottom side of the wafer-level IC packaging Lead-frame structure and composition of the surface-mount semiconductor package structure Multi-layer printed circuit board Antifuse and its formation method and with the anti-fuse non-volatile memory device unit cell Tandem electric signal processing circuit and electronic device Light-emitting diode packaging structure and encapsulation method Electronic Packaging Structure Flip-chip high-speed optoelectronic components and structure Pairs of piezoelectric friction side by side to promote the three-step device and scanning probe microscope Light-emitting diode and its manufacturing method, the production base of light-emitting diode method Three or four parallel advance of stepping piezoelectric device and scanning probe microscope lens body Silicon substrate and its manufacturing method Semiconductor device and voltage-divider A polysilicon layer and the microcrystalline silicon layer of the double-substrate active layer structure, methods and devices The edge of the thickness of silicon controlled Of a lateral semiconductor devices and high-voltage devices With a vertical-channel transistors semiconductor device Of a memory array and for the manufacture of a memory array method Read-only memory cell array structure Active-matrix substrate and display device High-voltage semiconductor integrated circuit devices, dielectric isolated type semiconductor device Image sensing devices Lens module and its manufacturing methods Solid-state imaging device and camera Injection angle for the trench isolation Organic Light-Emitting Display Device Organic light-emitting display device Bipolar transistor structure of the surface passivation Double-triggered silicon-controlled rectifier HFET Metal-oxide semiconductor transistors Self-aligned trench accumulation mode field effect transistor structure Thin-film transistors and Display Devices TFT Lead Diode Low-frequency, low noise, low-flashing diode Used for thin-film solar cells trap light structure Transparent sun solar cells Quaternary semiconductor heterojunction photovoltaic cells heat Si nano-pillar array heterojunction thin-film solar cells GaN-based micro-composite solar cells isotope Optical sensor Semiconductor by optical components Imaging Detector Transparent conductive oxide coating Silicon-based high-performance dual-junction solar cells Thin-film solar cells Alien LED Devices

非专业，不在行，求高手帮忙。谢谢！具有顶部及底部侧电连接的晶片级集成电路封装导线架结构及其构成的表面黏着型半导体封装结构多层印刷电路板反熔丝及其形成方法和具有该反熔丝的非易失性存储器件的单位单元串联用电式信号处理电路及电子装置发光二极管的封装结构及其封装方法电子封装结构高速光电组件及其芯片倒装结构双压电体并排推动的三摩擦力步进器与扫描探针显微镜发光二极管及其制作方法、发光二极管的底座的制作方法三或四压电体并行推进的步进器及其扫描探针显微镜镜体硅衬底及其制造方法半导体装置与分压电路具多晶硅层及微晶硅层的双底材主动层结构、方法及装置硅晶片的受控边缘厚度一种半导体横向器件和高压器件具有垂直沟道晶体管的半导体器件一种记忆体阵列及其用于制造一记忆体阵列的方法只读内存单元阵列结构有源矩阵基板和显示装置高耐压半导体集成电路装置、电介质分离型半导体装置图像感测装置透镜模块及其制造方法固态成像装置和照相机用于沟道隔离的斜角注入有机电致发光显示装置有机发光显示装置双极晶体管的表面钝化结构双触发型可控硅整流器异质结场效应晶体管金属氧化物半导体晶体管自对准沟槽累加模式场效应晶体管结构薄膜晶体管及显示器件薄膜晶体管无铅二极管低频、低噪音、低闪烁的二极管用于薄膜太阳电池的陷光结构透明遮阳太阳能电池片四元半导体的异质结热光伏电池硅基纳米柱阵列异质结薄膜太阳能电池氮化镓太阳能同位素复合型微电池光学传感器半导体受光元件成像探测器透明导电氧化物涂层硅基高效双结太阳能电池薄膜太阳能电池异形LED器件

With the guidance of object-oriented idea and the theory of flexible software, report is described as a three-layer model that consists of the origin-data layer, the data-processing layer and the format layer. The format of report is separated from its data, which makes the data variable, the format fictile and the processing of data modularized. The problem of fixed report template and data is solved. Users can adjust reports format and content easily at any moment. The data of report are dynamic and can be refreshed when needed.

它以面向对象的思想和柔性软件系统理论为指导将报表描述为包含原始数据层、数据处理层和格式层的三层结构模型，将报表数据与格式分离，使报表数据变量化、报表格式可塑化、数据处理模板化，从而解决了报表模板和数据固化的问题，使用户可以随时根据情况需要简捷方便的调整报表的格式和内容，并可以实现报表数据的动态赋值和自动刷新。

With cellulose as the skeleton, gelatinized cassava starch solution and tungsten carbide were used as porogenic agent and inert densifier, respectively. The matrix prepared showed good sphericity and a logarithmic symmetrical distribution of particle size.

取得的主要结果如下：纤维素基复合层析基质的物理功能化：以再生纤维素为骨架，碳化钨粉末为增重剂，糊化木薯淀粉为制孔剂，采用&反相悬浮热再生法&和成球后去除淀粉方法，成功制备了纤维素/碳化钨复合微球，可用作层析介质的基质。

The results show that myristic acid radical anion of precursor Zn0.78 Al0.2220.22c13h27COO0.81H2O can be almost completely replaced by complex anion [La(TiW11 O39)2]^3- under special controlled reaction conditions.

结果表明，该产物中[La(TiW11O39)2](上标 13-)配阴离子沿其长轴垂直于层板的方向分布于水滑石层板间，产物有规整的层状结构、大的层间距(d003=3.29nm)、良好的结晶度和热稳定性，产物对二甘醇与苯甲酸的酯化反应、二甘醇的脱水环化反应和苯甲醛的氧化反应具有良好的催化性能。

The well type gas nitrogenation oven uses the multi-layered multistage multi-link multi-spot assignment type ammonia input mode, enables the active nitrogen member fast evenly with the work piece surface union, forms the even fast nitrided level, the coordinate high speed spiral air flue, the effective addressing work piece blind hole and the deep hole nitriding craft, nitrides strongly by the microcomputer programmed control infiltrates, the diffusion technology heating curve.

井式气体氮化炉采用多层多段多环多点分配式氨气输入方式，使活性氮气分子能快速均匀地与工件表面结合，形成均匀快速氮化层，配合高速螺旋风道，有效解决工件盲孔和深孔地氮化工艺，由微电脑程序控制氮化强渗、扩散工艺加热曲线。

The invention relates to a composite high-temperature electric heating element and relative producing method, which is formed by graphite, carbon silicon and molybdenum silicide.

本发明公开了一种复合高温电发热元件及其制作方法，它是由石墨、碳化硅和二硅化钼三种材料复合组成的电发热元件；在将石墨、碳化硅和二硅化钼三种材料复合组成电发热元件时，将石墨作为基础层，在石墨基础层上先覆盖上碳化硅层，然后再在碳化硅层上覆盖上二硅化钼层。

The motive of this paper is to investigate the effect of processing parameters on the properties of silicon nitride and the coverage performance of insulator layer, and the effect of the film thickness of interface layer on the conduction current performance of thin film transistor.

本文旨在研究探索工艺参数对氮化硅薄膜的性能(如光禁带宽度、相对介电常数、折射率等)和钝化层氮化硅薄膜台阶覆盖性能的影响，以及栅界面层氮化硅薄膜厚度对薄膜晶体管导通电流性能的影响，制备性能优良的氮化硅薄膜。

The thermal boundary condition of the cast iron cooling stave with surface alloyed steel pipe was used for numerical simulation of temperature field and commercial software ANSYS and the method of coupling heat-structure were used to calculate thermal deformation of steel pipe at high temperature,and analyze the influence of air gap and thermal deformation on the life of cooling stave.The optimal size of air gap and hot load to guarantee long life of cast iron cooling stave were obtained.

根据合金化管铸铁冷却壁热态试验数据确定了合金化管铸铁冷却壁温度场数值模拟的边界条件，利用ANSYS软件、采用热-结构耦合的方法计算了高温状态下合金化管铸铁冷却壁内钢质冷却水管的变形，分析了气隙层和水管热变形对合金化管铸铁冷却壁寿命的影响，得出保证合金化管铸铁冷却壁长寿的最佳气隙层厚度和相应的最佳使用热负荷。

The thermal boundary condition of the cast iron cooling stave with surface alloyed steel pipe was used for numerical simulation of temperature field and commercial software ANSYS and the method of coupling heat-structure were used to calculate thermal deformation of steel pipe at high temperature,and analyze the influence of air gap and thermal deformation on the life of cooling stave.

根据合金化管铸铁冷却壁热态试验数据确定了合金化管铸铁冷却壁温度场数值模拟的边界条件，利用ANSYS软件、采用热-结构耦合的方法计算了高温状态下合金化管铸铁冷却壁内钢质冷却水管的变形，分析了气隙层和水管热变形对合金化管铸铁冷却壁寿命的影响，得出保证合金化管铸铁冷却壁长寿的最佳气隙层厚度和相应的最佳使用热负荷。

The reasons of iron ions content overproof in grade Ⅱ desalting water system,such as variation water quality,contamination of regenerant , operation adjustment of pretreatment system and switching operation of bed were discussed.

对二级脱盐水系统中铁离子含量超标的原因，如来水水质发生波动、再生剂受到污染、预处理系统操作调整、床体运行切换等进行了论述。

You were hired to drum up new business, so go and do it.

公司雇你招徕新业务，你就做你的事好了。