小热

SGs are innervated by sympathetic postganglionic axons, which, in contrast to the ordinary sympathetic innervation, use acetylcholine as the principal neurotransmitter.

人类在高温或运动时的热驱散主要依靠小汗腺的蒸发而带来的散热作用。

The less something jiggles about because of heat-induced vibration, the longer it can remain superposed.

一个物体受到的热振动越小，它能够保持叠加态的时间就越长。

There are three effects that may be important in producing this trend. First, lowtemperature oxidation preferentially affects the finer single-domain magnetites responsible for the Hopkinson peak, which is therefore suppressed in the more oxidized loams. Second, the possible production of uniaxial magnetite with shape anisotropy can also lead to a relatively muted Hopkinson peak. There is, additionally, a third alternative, and the one preferred here, that the natural alteration processes involved in pedogenic susceptibility enhancement have probably depleted the supply of ironbearing precursor phases, so that less new magnetite is formed on heating.

产生这种特殊热磁性质的可能原因如下：第一，成土过程中的低温氧化作用减弱了磁铁矿的Hopkinson效应；第二，可能是成土过程中生成的一向延长的针状磁铁矿颗粒表现出较弱的Hopkinson效应；第三，随着成土作用增强，现代黄土、黑垆土中的硅酸盐、粘土矿物因受土壤化作用分解而越来越少，加热过程中分解产生的磁铁矿造成的磁化率增强相对于其初始磁化率也就越来越小，从而产生越来越弱的Hopkinson/alteration峰，本文认为这是最主要的原因。

From the body in terms of quantity is not too small, especially in some cities and some structure not reasonable, so it should be said that commercial real estate there have been some signs of overheating, and now the Ministry of Commerce is also the judge that the commercial real estate there is a problem now, but these problem may be some signs of problems, from the overall point of view, our country the construction of commercial outlets or to the further development of the volume of commercial outlets not more than the total or inadequate.

从尸体在数量上是不是太小了，特别是在一些城市和一些结构不合理，所以应该说，商业地产出现了一些过热迹象，而现在商务部也法官，商业房地产存在问题，但这些问题可能是一些迹象的问题，从整体的角度来看，我们的国家建设的商业网点或进一步发展的商业网点数量不超过总或不足。

With the car we had no major reliability issues - a few niggles with overheating which were quickly solved and then the car ran pretty faultlessly.

&赛车没有主要的肯靠性问题---一点小部分的过热，很快就解决了，并且这辆车跑的非常好，没有一点故障&

On the basis of the stem heat balance principle to measure the plant transpiration, with the instruments to collect meteorological data in greenhouse, we studied the variation rules of tomato sap flow under different environmental treatments through shading and obturating environment.

在茎热平街技术测定植株茎流的原理基础上，结合温室内气象数据采集仪器，通过对小温室做遮光、密闭处理，探讨番茄茎流的变化规律。

Suprasetter145, 162 and 190 outlooked systems are designed for speed master series XL145 and equipped with the XL162 business card printing machine, but they can be other maximum business card printing width is 190 cm (74.8) business card printing machine supply a printing plate.

Suprasetter145、162和190热敏CTP编制都是专为海德堡速霸XL145和XL162制卡机而安排的，但它们可以为其他最不小制卡宽度为190厘米（74.8英寸）的制卡机提不求印版。

Two series of polyurethane acrylate grafted acrylic resins (Acr-g-TPU-PETA and Acr-gPPU-PETA) self-emulsifying systems are obtained by grafting -NCO group modified polyurethane acrylates with acrylic copolymer prepared from n-butyl acrylate, styrene,βhydroxyethyl methacrylate and acrylic acid The self-emulsifying systems showed Newtonian fluidity with viscosity closed to that of water, the solid contents were around 30% The T〓 of 15～4℃ for dried film before photocuring favored film formation at room temperature DSC and DMA results showed that PU-PETA is compatible with acrylic resin in the grafted resin The TG and dTG curves for Acr-g-PU-PETA samples were substantially different from the corresponding blends, and the brodened dTG peaks for photocured grafted resin suggest that there might be multiple interactions among chain segments The photocued film of the grafted resins self-emulsifying system exhibited good overall properties with polyurethane acrylate grafts ranging from 30% to 50%, and Acr-g-TPU-PETA series showed better properties than Acr-gPPU-PETA series The adhesion of the photocured film was 1～2 grade, impact strength was 50kg-cm and flexibility was 1mm The Shore hardness and the adhesion of the film decreased markedly if PETA was replaced by HEMA as photoactive group due to the lower C=C double bond content in the grafted resin The polyhydroxy amine-linked thioxanthones photoinitiators can be evenly dispersed in self-emulsifying system without color spot appearing in the dried film The films photocured with IV〓～IV〓 generally exhibited higher Shore hardness, gloss and solventresistance than that cured with Irgacure 2959 and did not induce the rusting of the iron substrate Pigmenting with titanium oxide had no effect on the photocuring The polyhydroxy amine-linked thioxanthone IV〓 and IV〓 can be new candidates for the formulation of titanium oxide pigmented photocurable water-borne coatings for their pale-yellow appearance and slight interference with the color of the coatings WB 4759 with high water-solubility coalesced and separated from the dried resin film, and even induced the rusting of iron substrate.

以丙烯酸丁酯，甲基丙烯酸-β-羟乙酯，丙烯酸及苯乙烯合成厂丙烯酸共聚树脂，并与含-NCO端基的聚氨酯丙烯酸酯接枝反应，经水性化后，得到两个系列（Acr-g-TPU-PETA和Acr-g-PPU-PETA）各5个不同配比的丙烯酸树脂接枝聚氨酯丙烯酸酯自乳化体系，粘度与水相近，为牛顿流体，固含量30％左右。光固化前干燥涂膜的玻璃化转变温度在-15℃～4℃之间，有利于室温下成膜。DSC及DMA谱表明两种树脂基本相容。Acr-g-PU-PETA的热失重行为明显不同于共混材料，接枝样dTG峰明显宽化，表明接枝样中链段之间的相互作刚有多重性，丙烯酸树脂与聚氨酯之间有一定的相容性。接枝树脂自乳化体系光固化涂层的综合性能以聚氨酯丙烯酸酯成分为50％～30％者相对较好，且以Acr-g-TPU-PETA系列更理想。光固化膜的附着力为1～2级，冲击强度为50kg·cm，柔软性多为1mm。以HEMA代替PETA作为接枝树脂的活性基团，碳—碳双键密度太低，光固化膜交联点太少，硬度和附着力均较差。多羟基胺连硫杂蒽酮光引发剂能均匀分散于树脂自乳化体系和接枝树脂干膜中，不出现色斑，光固化膜肖氏硬度一般高于以Irgacure 2959为光引发剂的光固化膜，光泽度及耐丁酮溶剂性能均有所提高，不会诱导铁基生锈，钛白着色对光固化结果几乎没有影响。本论文所合成的多羟基胺连硫杂蒽酮光引发剂IV〓与IV〓为浅黄色，对光固化涂层的颜色干扰较小，为配制钛白着色光固化水性涂料提供了新的光引发剂。水溶性太强的WB 4759在干膜中易聚结析出，且对所附着的铁基有诱导锈蚀作用。

On my way back, I felt so hot so I pottered about in our courtyard, when I once again, saw a beautiful shadow.

回来的时候太热了，就在小区里逛逛，结果就看到了美丽的影子。

The invention preheats and strengthens heating to a test part by the composite induction device on the same heating power, thereby improving the temperature gradient, limiting the overheating at the front of the interface along the smaller area, simplifying the processing parameter, acquiring the higher cooling speed, improving the mechanical properties of the material.

本发明是在同一个加热电源上通过一个复合感应加热装置对试件预加热和强化加热，提高了温度梯度，将过热局限在界面前沿较小的区域，简化了工艺参数，获得较高的冷却速率，提高了材料的力学性能。

This one mode pays close attention to network credence foundation of the businessman very much.

这一模式非常关注商人的网络信用基础。

Cell morphology of bacterial ghost of Pasteurella multocida was observed by scanning electron microscopy and inactivation ratio was estimated by CFU analysi.

扫描电镜观察多杀性巴氏杆菌细菌幽灵和菌落形成单位评价遗传灭活率。