导电的

This company mainly produces: Conductive materials, anti-static masterbatch, PP, PE, PS, PC, ABS; main target customers are, and anti-static conductive PP injection molding, hollow boards, turnover boxes, sheet: PE film blowing, blow molding , blowpipe, EPE; PS sheet, injection molding: ABS sheet, injection molding; PC extrusion, injection molding.

本公司主要生产：导电原料、防静电母料、 PP 、 PE 、 PS 、 PC 、 ABS ；主要针对的客户是导电及防静电 PP 注塑、中空板、周转箱、片材： PE 吹膜、吹塑、吹管、珍珠棉； PS 片材、注塑： ABS 片材、注塑； PC 押出、注塑。

The several kinds of Ag-NiFe2O4 cermets with different mass percent of Ag have prepared. Microstructural changes were observed by scanning electronic microscope and composition was determined with x-ray detector. Effect of different content of Ag on the density, property of thermal shock,conductivity and corrodent rate were tested. The results showed that the thermal shock performance and conductivity have improved in company with the addition of content of Ag.

制备了不同金属Ag含量的Ag-NiFe2O4金属陶瓷，利用扫描电子显微镜观察显微组织，由X射线衍射分析化学成分，研究了Ag的添加量对其体积密度、气孔率、热震性、导电率以及腐蚀速率的影响，试验结果表明，抗热震性和导电能力随着Ag含量的增加而增强，导电率的提高和腐蚀率的增大仍是一对突出的矛盾。

The results show that the compound conductive fiber has typical structure of sheath-core consists of black greened polyaniline electric conductive deposition as the skin and the white polypropylene matrix fiber as the core, which makes the compound fiber preferable physical mechanical property. The intensity and the elongation ratio of the electric conductive fiber are decreased but the thermal stability is enhanced after modified. The compound fiber has the good acid resistance but poor base resistance. The thermal stability of the compound fiber prepared by 4-methyl-benzene sulfonic acid is better than that prepared by hydrochloride acid. Moreover, the compound fiber can be re-doped by other organic or inorganic acid after freed from the adsorbed acid. Furthermore, the electric conductivity of the compound fiber decreases with the temperature increasing but hardly changed with the humidity. The adsorptive ability and therefore the content of the polyaniline, the constant of electric conduction, and the durability of the compound fiber can be enhanced by thinning the diameter, section heteromorphosis, section heteromorphosis and plasma treatment of the surface or blending with COPET of the fiber.

结果表明：复合纤维是聚丙烯与聚苯胺的共混体系，具有典型的皮芯型结构，皮层为墨绿色的聚苯胺沉积层，形成连续的导电通道，芯层为白色的聚丙烯基质纤维，提供物理机械性能；导电改性后纤维的强度、强力和伸长率均有下降，但热稳定性得到提高；复合纤维的耐酸性比耐碱性好，以对甲苯磺酸做掺杂酸比盐酸掺杂聚苯胺热稳定性好，脱掺杂后的复合纤维，可用其它无机酸或有机酸进行再掺杂；复合导电纤维的电导率随温度升高降低幅度较大，但几乎不受湿度影响；基质纤维细旦化、截面异形化、表面等离子体处理或共混COPET等改性处理均能提高纤维的吸附性，进而提高复合纤维表面聚苯胺含量、电导率和耐久性。

The influences of different kinds of conducting materials and their contents and different volume of PVC grain on the electrical property,mechanical properties and terrazzo lines of the floor were studied.

采用特殊成型方法，研制类似网络结构的水磨石形式的抗静电地板，研究了多种导电材料及其不同用量对网络地板导电性能、力学性能和地板纹路的影响；研究了PVC颗粒大小对地板的导电性能、力学性能和地板纹路的影响；对体积电阻率曲线用三次方程进行了拟合，得到体积电阻率与含量的函数关系，并发现其具有很好的相关性。

First, different types of conducting materials chosen as raw materials are pressed into different form and different content terrazzo include graphite of 1000 meshes, graphite of 325 meshes, spherical graphite, carbon black, acetylene black and conductive Carbon Black, whose performances of analysis and comparison was made.

在实验过程中，通过选取不同类型的导电填料，制备了不同类型、不同含量的1000目石墨、325目石墨、球形石墨、普通碳黑、乙炔碳黑以及导电碳黑的抗静电地板，并对抗静电地板的性能作了分析和比较，最后选择了乙炔碳黑作为导电填料。

Based on above-mentioned studies, we proposed the conductivity mechanism of chopped-carbon fiber filled thermoset polymer composites and established a structure-oriented model based on Webers model. The experimental data fit the model well.

基于以上实验结果，我们提出了短切碳纤维/热固性树脂基复合材料的导电机理，并借鉴了We ber的模型，建立了这类导电复合材料的结构型导电模型，实验结果与理论预测值吻合较好。

Wire resistive touch screen technology, the grass-roots to the voltage field in both directions through the precision resistor networks are added to the work of conductive glass surface, we can simply be understood as the voltage field in both directions of staggered working hours added to the same work surface, The outer layer of Ni-Au conductive layer is only just be used as a pure conductor, there are time-test, after touching the inner ITO contact point X-axis and Y-axis voltage value method measured touch point position.

五线电阻技术触摸屏的基层把两个方向的电压场通过精密电阻网络都加在玻璃的导电工作面上，我们可以简单的理解为两个方向的电压场分时工作加在同一工作面上，而外层镍金导电层只仅仅用来当作纯导电体，有触摸后分时检测内层ITO接触点X轴和Y轴电压值的方法测得触摸点的位置。

The hollow-axis motor drives the offset nozzle and rotates the arc on the tip of wire at high speed,so as to ensure enough penetration into the sidewalls in narrow gap welding .

在该系统中，焊丝穿过电机的空心轴后从导电嘴的偏心孔送出，电机带动导电杆和偏心导电嘴旋转，从而使焊丝端部的电弧以一定直径高速旋转，以保证窄间隙焊接接头具有足够的侧壁熔深。

The conductive pole only acts for contact and conducting during welding, the pressure pole in its center forces pressure under action of compression spring, and the pressure pole is characterized by high fusing point and mechanical intensity because of the tungsten alloy material, and the life length of contact finger is prolonged.

在焊接作业时，导电杆仅起到接触导电作用，而其中心的压力杆在压簧的作用下起到施加压力的作用，由于压力杆采用钨合金材料，具有高熔点、高机械强度的特点，不会变形，导电杆压力小不易变形，从而延长了整个触头的使用寿命，并且焊点整齐美观。

B-62530 silver coated copper conductive coating is made of silver coated copper powder which is of excellent conductivity.

B-62530 银包铜导电涂料是深圳市鑫盛丰化工科技有限公司的生产由优秀的银包铜导电粒子制成的导电漆。

With Death guitarist Schuldiner adopting vocal duties, the band made a major impact on the scene.

随着死亡的吉他手Schuldiner接受主唱的职务，乐队在现实中树立了重要的影响。

But he could still end up breakfasting on Swiss-government issue muesli because all six are accused of nicking around 45 million pounds they should have paid to FIFA.

不过他最后仍有可能沦为瑞士政府&议事餐桌&上的一道早餐，因为这所有六个人都被指控把本应支付给国际足联的大约4500万英镑骗了个精光。