对圆的

The effect of tribology factors on bearing vibration is studied experimentally. AR model and WPT are used to processing the normal arid abnormal signals. The results are as follows:1. The vibration of ball bearings is caused by the tribology action of contact pairs of ball and ring races and has the essential of tribo-dynamics. Any factors affecting the tribology characteristics of contact pairs will affect vibration and noise of bearings consequently.2. Vibration characteristics of bearing keep almostly unchanged with the increasing of axial load expecting the increasing of nature frequencies. When radial load increasing with axial load unchanged, nature frequencies keep unchanged but some new vibration peaks appears in the spectrum.3. Vibration amplitudes are damped and nature frequency are enhanced with sufficient lubrication. Vibration and noise of bearings increase obviously and roar can happen and the contact surfaces scratch slightly under insufficient and unclean lubrication state. Bearing will be disabled in a few minutes without any lubrication.4. Bearing vibration is unstable under low speed. With the speed increasing, the vibration become stable and natural frequencies increase slightly but the amplitudes increase apparently.5. Bearing vibration can be excited only by some harmonics ofwaviness without lubrication and by all harmonics with lubrication based on the theoretical analysis.6. The nature frequencies of ball bearings decrease with the increasing sizes. When international clearance increasing, nature frequencies decrease in radial and increase in axial and angular and the amplitudes increase in radial and decrease in axial and angular. When the number of balls increasing, nature frequencies increase and amplitudes decrease. When the pitch diameter increasing, axial nature frequency increase and others nearly keep no change. When outer race groove curvature radius increasing, nature frequencies increase in radial and decrease in axial and angular and amplitudes keep no change in radial and increase in axial and angular. When inner race groove curvature radius increasing, nature frequencies decrease and amplitudes increase.7. The distortion in amplitude and frequency components of bearing vibration signals picked up by the present probe measurement method is founded and right conclusions cannot be achieved by the signals. When accelerometer is rigidly screwed with steel stud onto a flat outer surface of a ball bearing, vibration signal can be got without distortion and the reliability of research on bearing vibration is assured.8. AR model is suitable for large samples of bearing vibration signals, square root of length of samples can be used as the upper limitation of order determination and the FPE order selection criterion is effective. Many advantages of AR spectrum are founded over the classical based on FFT.9. Time-Frequency analysis is necessary for abnormal noise of ball bearings. WPT overcomes the principle shortcomings of STFT and proved to be a best tool to process the abnormal signals.

理论分析和试验研究表明： 1球轴承振动是钢球—滚道接触副中的各种摩擦学作用引起的，具有摩擦动力学的本质，任何对接触副的摩擦学特性有影响的因素都将对球轴承的振动和噪声特性产生影响； 2中心轴向载荷作用下，载荷增大使球轴承的固有振动频率升高，载荷越大同样的载荷增幅引起的频率升幅减小，足够大的中心轴向载荷作用下载荷的变化对球轴承振动的频率特性不会产生明显的影响； 3轴向和径向联合载荷作用下，径向载荷不大时球轴承振动的固有频率基本不变，但是可能引起变刚度激励的非线性振动，出现新的频峰，过大的径向载荷将使部分钢球脱离接触，使球轴承的振动和噪声呈现不稳定状态； 4润滑对球轴承的振动和噪声特性有重要的影响，良好的润滑对振动有明显的抑制作用，润滑不充分时，振动和噪声的水平会有明显增高，一定条件下还会激发接触副中的谐振，发出啸声，造成接触表面的伤害，无润滑干接触时，短时的运转就会损伤接触副表面，使振动和噪声迅速增大，并随时可能引发严重的磨损和卡滞失效；接触副润滑良好时，油膜的"刚化效应"使球轴承振动的固有频率有所提高，润滑剂中含有弥散性污浊时，振动的幅度总体升高，但弥散性污浊不会改变球轴承振动的频率特性；浙江大学博士学位论文：球轴承振动的研究 5低速时，球轴承振动的基本特征呈现不稳定状态，随着转速的提高，球轴承振动的频率特性趋于稳定，固有频率频峰升高； 6理论分析表明，干接触时钢球和滚道表面波纹度的某些谐波分量能激励球轴承的振动，振动的幅值与谐波幅值成正比，实际球轴承中钢球的分布不可能完全均匀，波纹度的激励作用会随时发生；润滑接触的分析表明，波纹度的任意谐波分量均能激励球轴承的振动； 7球轴承的几何和结构参数分析表明，球轴承尺寸越大，径向、轴向和角振动的固有频率越低；钢球中心圆直径增大，球轴承的径向和轴向振动的固有频率基本不变，角振动的固有频率有所上升，振动的幅频特性基本不变；径向游隙加大使球轴承的径向振动固有频率降低，轴向和角振动的固有频率有所升高，径向振动幅频特性的幅值升高，而轴向和角向降低；钢球的数量增多使球轴承振动的固有频率上升，幅频特性的幅值下降，径向振动的幅值下降最为明显；外圈沟曲率半径系数增大使球轴承径向振动的固有频率升高，轴向和角振动的固有频率降低，径向幅频特性基本不变，轴向和角向幅频特性幅值升高；内圈沟曲率半径系数增大使径向、轴向和角振动固有频率均下降，振动幅频特性的幅值均有升高； 8试验对比表明，传感器采用探针式安装时，由于探针接触副接触特性的影响，钡(量得到的球轴承振动信号有失真，采用专门设计和制作的试验球轴承，以固定式安装加速度计，首次测量得到了球轴承振动的真实信号，通过对振动信号的分析，验证了球轴承振动的理论模型； 9)基于时间序列分析的AR模型适用于大样本球轴承振动信号的分析，以样本长度的均方根值作定阶上界，FPE做判阶准则，给出的AR谱光滑，频率分辨率高，是球轴承振动分析的简便而可靠的手段； 10以时频域分析的小波包变换分析球轴承异音信号能够比较好地定位和聚焦异音发生的时间，时间间隔，频率范围，同样是球轴承振动分析的可靠的手段，可用作球轴承故障诊断技术。

There are greater differences between the absorbing dust、sulfur dioxide and heavy metal capability of different types of trees. Synthetically Considering the purification function on the air pollution of trees, can divide the trees into : The first kind of comprehensive absorbability to the air pollution is relatively strong, pagoda tree, Apple, China Savin, Poplar; Second comprehensive absorbability in air pollution strong, such as Deodar Cedar, purple leaf Li, Glossy Privet; The third kind of comprehensive absorbability to the air pollution is medium-sized, such as the cedar , Pear , Evergreen Euonymus , peach, apricot, Huashan pine.

综合考虑植物对环境的净化作用，可将试验段生态防护林带的组成树种分为三类：第一类对环境净化能力很强，如圆柏、国槐、杨树、苹果等；第二类对环境净化能力强，如雪松、大叶女贞、紫叶李等；第三类对环境净化能力中等，如华山松、梨、杏、桃、黄杨等。

Pin register system: A set of appliance s which use pin and holes to assure accurate register of copy, film and plates furring their priparation; especially important for the register of precise colour printing.

圆钉定位系统：在处理稿件、菲林和印版时，用钉对孔的方法以确保准确定位的一套设备。在四色彩印方面，对位问题特别重要。

Pin register system: A set of appliances which use pin and holes to assure accurate register of copy, film and plates furring their priparation; especially important for the register of precise colour printing .

圆钉定位系统：在处理稿件、菲林和印版时，用钉对孔的方法以确保准确定位的一套设备。在四色彩印方面，对位问题特别重要。

Secondly, in this part, we will introduce the notation of average geodesic curvature for curves in the hyperbolic plane, and investigate the relationship between the embeddedness of the curve and its average geodesic curvature. Finally, we will employ the Minkowskis support function to construct a new kind of non-circular smooth constant breadth curves in order to attack some open problems on the constant width curves for example, whether there is a non-circular polynomial curve of constant width, etc.

其次，对双曲平面上的曲线引入平均测地曲率的概念，并讨论双曲平面上凸曲线的嵌入性与它的平均测地曲率之间的关系，其目的是为了将双曲平面上曲线的性质与欧氏平面中曲线的性质作一些对比；最后，我们利用Minkowski支撑函数构造了一类新的非圆的光滑常宽曲线，其目的是想回答有关常宽曲线的一些未解决问题如是否存在非圆的多项式常宽曲线？

Here, we will give an independent proof of the existence for inequality (2.1.3), and by the way, give an estimate on the width of the bi-enclosing annulus of closed convex curves in the plane. Secondly, in this part, we will introduce the notation of average geodesic curvature for curves in the hyperbolic plane, and investigate the relationship between the embeddedness of the curve and its average geodesic curvature.

其次，对双曲平面上的曲线引入平均测地曲率的概念，并讨论双曲平面上凸曲线的嵌入性与它的平均测地曲率之间的关系，其目的是为了将双曲平(来源：ABC论84文网www.abclunwen.com)面上曲线的性质与欧氏平面中曲线的性质作一些对比；最后，我们利用Minkowski支撑函数构造了一类新的非圆的光滑常宽曲线，其目的是想回答有关常宽曲线的一些未解决问题如是否存在非圆的多项式常宽曲线？

It points out that the development of circular warp knitting machine alternate structure technology will play a very big role in the innovation of circular warp knitting machine.

介绍了针织三维结构预制件技术及由其组成的经编结构复合材料的结构特点和应用，指出圆机间隔结构技术的发展将对圆机的革新起到很大的促进作用。

This paper explores a way of analyzing the transformation of the cross section of thinwall structures while they are bending, gives the result of analysis for circular thin-wall structures.

本文对薄壁构件弯曲时横截面的变形提出一种分析，并对圆型薄壁构件给出了分析结果，说明其不应忽视的影响

The standard turbulence model has been modified to acquire more precise prediction for the turbulent axisymmetric sudden expansion pipe flows.

本文对单相湍流标准模型进行修正，提高了其对圆管突扩湍流的预测精度。

The CL data file can be converted to NC code with NC post module of Pro/E, which can shorten design cycle of tricone rock bit, improve design quality and enhance the competitive capacity and innovative ability of enterprises.

在Pro/Engineer环境下首先由软件建立钻头牙轮的三维实体，然后应用Pro/NC模块完成了牙轮内圆孔的粗、精NC加工，生成了CL刀具路径数据；完成了牙轮外圆的粗、精NC加工，生成了CL刀具路径数据，同时完成了对粗、精加工两个序列的合并；通过本研究产生的CL文件经过NC post模块可生成数控机床的控制代码，从而可以缩短三牙轮钻头的设计制造周期，提高产品的设计质量，提高企业的技术创新能力和市场竞争能力。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。