定量的

The effects of feeding way of phosphorus pentoxide, ratio of C8H174OH to P2O5, reaction temperature and time on the synthesized isooctanol polyethenoxy ether phosphate were investigated. Its optimum synthesis technology conditions were as follows: feeding at batches while stirring tempestuously at 45℃, the ratio of nC8H17(EO4OH:n(P2O5)=2:1, esterifying at 70℃ for 4h, and add given volume of water at 70℃ for hydrolysing 2h.

研究五氧化磷的投料方式、反应物的用量比、反应温度和反应时间等因素对合成的异辛醇聚氧乙烯醚C8H17(EO4OH磷酸酯性能的影响，得到优化的异辛醇聚氧乙烯醚磷酸酯的合成工艺条件：在强烈搅拌下，分批投入P2O5，加料时的温度不超过45℃，nC8：H17(EO4OH：n(P2O5)=2：1，酯化温度为70℃，酯化时间为4h，在温度70℃时加入定量的水再水解2h。

The rules of tides in tideway in lack of hydrological data are studied against the background of the flood control operation in Buji River Basin.

以深圳市布吉河流域的防洪调度为背景，在各种水文资料严重不足的情况下，研究了感潮河段的潮汐一般规律，通过对布吉河口的水位进行潮水和洪水的分离，用一种分段线性拟合的方法，对洪水波产生的增水进行了定量的分析，并且提出了根据潮水预报和增水关系进行潮水补偿调度的具体计算方法和过程。

The results showed that the reaction activity between glycinin (7S subunit) and maltodextrin was high, and the reaction proceeds quantitatively regardless of the variation of protein and polysaccharide mass ratio. The molecular properties of the formed conjugates are also highly uniform. The reaction activity between β-conglycinin (11S subunit) and maltodextrin is relatively lower Compared to that of glycinin, and the molecular properties of these conjugates are affected by the variation of the R values.

电泳分析表明：7S亚基与麦芽糊精的反应性较高，而且在文中所研究的蛋白质与多糖质量比的范围内，7S亚基都能与麦芽糊精发生定量的共聚合反应，形成分子特性高度一致的共聚物；而11S亚基与麦芽糊精间的反应性较低，共聚物的分子特性受蛋白质与多糖质量比的影响。

Jin Shui HighSPEED Mill Power Producing System can make the differdnt molal structures mate rials powderfor 20 eyes to 80eyes in common temperaeure, These materials are differdnt kinds of soft hard PVC 、PP、PS; thosecan change its nature such as PP、TEP、 PS、 PA、 PC ,etc; non-plastic such as dee rhm, timber, leather and palm oil shells, etc,Especially suit for raw material of plastic to chang its naure, paints of mother colour tofill up , paints, tec .During the working process, firstly put the quantitative and well-distrib uted rawmaterialsun to the Moll Box by the Hopper, them put the powder out of the Moll box by Auto loader, finallysirfand retrieve the powder through sifting machine .If someofthe have not milled well , you can do itagain As a matter of fact, it will be as excellent as the mew plastic and can keep every normof the munchang eablein their function of chemistry and physicsafterusing about 30% of power mixed up with 70%raw mate rials of plastic. So the machines if helpful of plastic businessman to save money and good for protecting our environ mentathe same time

金穗JS 系列高精密磨粉生产系统能在常温下将各种的软硬：PVC、 PP 、PS 及改性PP 、PS 、PA 、PC 等不同分子结构的及非塑料类如（鹿角、木梢、皮革及棕油壳等）材料磨制成20目~80目粉末状，适合塑料原料改性，色母料填充涂料、塑纺织的涂料、地毯背面涂料、制药等加工行业，这些颗粒原料通过定量的加料器均匀地送进磨箱中，再由吸风机将磨好的粉末吸出磨箱经过筛选机筛选回收，如较粗的颗粒再次被送进磨箱中进行粉磨，这些材料经过我们特殊改良刀齿，创新突破来配合日新月异原材料组合使用，经塑料制品厂商实践证明在其产品原料中加入磨制粉体30%左右使其更好塑化且其制品的化学，物理性能保持全新料的各项指针不变，因此是塑料厂商降低成本且同时有利于保护环境的粉磨回收设备。

In Shui HighSPEED Mill Power Producing System can make the differdnt molal structures mate rials powderfor 20 eyes to 80eyes in common temperaeure, These materials are differdnt kinds of soft hard PVC 、PP、PS; thosecan change its nature such as PP、TEP、 PS、 PA、 PC ,etc; non-plastic such as dee rhm, timber, leather and palm oil shells, etc,Especially suit for raw material of plastic to chang its naure, paints of mother colour tofill up , paints, tec .During the working process, firstly put the quantitative and well-distrib uted rawmaterialsun to the Moll Box by the Hopper, them put the powder out of the Moll box by Auto loader, finallysirfand retrieve the powder through sifting machine .If someofthe have not milled well , you can do itagain As a matter of fact, it will be as excellent as the mew plastic and can keep every normof the munchang eablein their function of chemistry and physicsafterusing about 30% of power mixed up with 70%raw mate rials of plastic. So the machines if helpful of plastic businessman to save money and good for protecting our environ mentathe same time

S 系列高精密磨粉生产系统能在常温下将各种的软硬：PVC、 PP 、PS 及改性PP 、PS 、PA 、PC 等不同分子结构的及非塑料类如（鹿角、木梢、皮革及棕油壳等）材料磨制成20目~80目粉末状，适合塑料原料改性，色母料填充涂料、塑纺织的涂料、地毯背面涂料、制药等加工行业，这些颗粒原料通过定量的加料器均匀地送进磨箱中，再由吸风机将磨好的粉末吸出磨箱经过筛选机筛选回收，如较粗的颗粒再次被送进磨箱中进行粉磨，这些材料经过我们特殊改良刀齿，创新突破来配合日新月异原材料组合使用，经塑料制品厂商实践证明在其产品原料中加入磨制粉体30%左右使其更好塑化且其制品的化学，物理性能保持全新料的各项指针不变，因此是塑料厂商降低成本且同时有利于保护环境的粉磨回收设备。

The shape of tunnel is gained by use of many processing ways to the initial images in the field. The quantity of overbreak and underbreak is gained by contrasting between the extracted shape and the designed shape. The same method is applied to other tunnel sections then the overbreak and underbreak quantity of a certain section or the total tunnel is gained so the problem about the evaluation of overbreak underbreak in the tunnel is solved quantitatively.

通过对野外摄取的隧洞图像进行一系列的处理得到隧洞的基本形状，然后与隧洞的设计形状对比分析，即可得到隧洞在该断面上的超欠挖方量，然后对其他断面采用同样的技术就可评价某一段或整个隧洞的超欠挖数量，这样就从定量的角度解决了以往工程中难以解决的超欠挖评价问题，为工程超欠挖的判断与决策提供合理依据。

This paper first stated the hydrolysis law of organochlorosilane and the effect of various R/Si and ph/R on the properties of propolymer,there showed the mathematical calcu- lation method and computer progrom of the every monomer amount to synthetize propolymer, and provided the necessary theortical basis and quantitive calculation equation for the syn- thetise,In addition,the co-existing structure model of linear and trapezoid was put forward on the analysis of prepolymer micro-structure,which laid a found...

本文阐述了有机氯硅烷单体的水解规律及不同R/Si和ph/R值对预聚体性能的影响，在此基础上，提出了合成预聚体所需各单体用量的数学计算方法和计算机计算的程序，为合成提供了必要的理论依据和定量的计算公式。此外，文章在剖析预聚体微观结构的基础上，提出了线型与梯型结构并存的结构模型，为进一步更深入地认识预聚体的性能奠定了理论基础。

This paper breaks through the ancient research finitude of determining the nature to the credit lack by the establishing of mathematics model, and gives the ration models, thereby gives the analysis and explanation of ration. It makes certain that enterprise credit is important in the field of marketing, and inaugurates new way of innovation of customer value, at the same time, it also provides new thought of getting continuous competition advantages, that is enhancing credit construction of the enterprise.

本文通过数学模型的建立，突破了以往对企业信用缺失定性研究的界限，给出了量化的模型，从而对企业信用缺失给顾客价值所造成的损害做出了定量的分析和解释，明确了企业信用在市场营销领域的重要性，为顾客价值创新开辟了一条新的途径，同时也为企业获得持续竞争优势提供了新的思路，即不断加强企业信用建设。

Basing on this mode and his two invention patents, chooseing ANSYS as platform and linking the important project of JiLin province Science and technology ministry 'cylindrical and cone spurgears rolling preform and extrusion precise forming equipment research and manufacture for automobile'(NO.20030311), the author made the finite element numerical simulation about elasto-plastic large deformation heat-force couping of rolling preform and stamping-extrusion and bulge-extrusion combining precise forming for spur gear', investigated qualitativiely and quantitatively on the gears formability for the environmental and the blank parameters , summarized some useful conclusions.

本论文是我的导师宋玉泉教授关于&塑性精密成形&研究方向的一个组成部分，按照他所提倡的&科、教、产一体化&培养模式，并以他的两项发明专利为依托，立足于以ANSYS软件为模拟平台，密切结合吉林省科技厅重点项目&汽车用圆柱圆锥直齿轮滚轧和挤压精成形设备研制&(批准号：20030311)和吉林大学超塑性和塑性研究所&直齿轮中试生产线建设&，开展了对&圆柱直齿轮滚轧制坯－镦挤、胀挤复合精成形&的有限元弹塑性大变形热－力耦合数值模拟，对环境参数和轧件内部的参数对制件成形性的影响进行了定性和定量的研究，总结了一些有意义的结论。

The plastic go down the hopper smoothly and is gripped by the thread of the screw. It is forced to go toward the direction of the gear end along with the rotation of the screw. A mechanical transferring process is formed. During the running of the plastic from the feed port to gear end, a high pressure is formed in the process of plastic curing due to the gradual decreasing of the thread depth and the resistance of filter gauze, splitter plate and gear end. The high pressure helps to press the raw material and improve its heat conductivity performance and the quick melting of the plastic, at the same time, the gradual increasing pressure can help the gas which is among material particles exhausted from the air holes.

在压力升高的同时，塑料一方面被外部加热，另一方面塑料本身在压缩、剪切、搅拌的运动过程中，由于内磨擦力也产生了大量的热，在外力和内力的联合作用下，塑料温度逐渐增高，其物理状态也经历了玻璃态--高弹态--粘流态的变化，一般地说来，在加料段中主要是玻璃态，在螺杆螺纹逐渐减少的中间部分压缩段中，物料主要处于高弹状态，同时也逐渐的熔融，而物料到压缩段后部和化段作用处于粘流态了，这时我们称塑料已完全塑化了，由螺杆推力作用将塑化的塑料定压定量的从机头中挤出。

We have no common name for a mime of Sophron or Xenarchus and a Socratic Conversation; and we should still be without one even if the imitation in the two instances were in trimeters or elegiacs or some other kind of verse--though it is the way with people to tack on 'poet' to the name of a metre, and talk of elegiac-poets and epic-poets, thinking that they call them poets not by reason of the imitative nature of their work, but indiscriminately by reason of the metre they write in.

索夫农 、森那库斯和苏格拉底式的对话采用的模仿没有一个公共的名称；三音步诗、挽歌体或其他类型的诗的模仿也没有——人们把&诗人&这一名词和格律名称结合到一起，称之为挽歌体诗人或者史诗诗人，他们被称为诗人，似乎只是因为遵守格律写作，而非他们作品的模仿本质。

The relationship between communicative competence and grammar teaching should be that of the ends and the means.

交际能力和语法的关系应该是目标与途径的关系。