孔径

Was studied, and the adsorption isotherm and adsorption kinetics curve were drawn.

结果表明：MCG是粒径为3～10μm的微粒，表面微孔(大部分孔径小于1nm)。

Air electrode ; Pore size distribution ; Carbon dioxide ; Concentrator

空气电极；孔径分布；二氧化碳；浓缩器

Based on the 1T15M-2 reversible sleeve air spring made by Firestone Corp., an air spring with auxiliary chamber was built. The character of the air spring in vertical direction was described as a linear spring damper element. Using the method of free vibration with damping, the changing rules of the stiffness and damping under different pressure in the air spring with the change of throttle orifice diameter have been studied experimentally.

以美国凡士通公司的IT15M-2型膜式空气弹簧为基础，构建带附加空气室的空气弹簧，将带附加空气室空气弹簧简化为由并联线性弹性和线性阻尼组成的垂直弹性元件，采用单质点自由衰减振动的方法，试验研究不同空气压力下弹簧垂直刚度和阻尼随节流孔孔径变化的规律。

Practice of the high blast temperature in 300 m 3BF of Maanshan Iron and Steel Co.Ltd;2. Measures to high blast temperature operation;3. A series of measures for realizing high blast temperature and long campaign have been taken in the design of ex- ternal combustion type hot air stove provided by Nippon Steel for 4350m~3 blast furnace newly built in Taiyuan Iron and Steel Co.

在新建的太钢4350m~3高炉新日铁外燃式热风炉的设计中，围绕高风温长寿命采取了一系列措施：蓄热室、燃烧室、混风室内墙体与拱顶的拱角相接处，采用迷宫式结构，防止独立砌体间窜风；在开孔部位采用组合砖，以提高这些关键部位的气密性和结构稳定性；蓄热室内采用带凹凸槽的小孔径七孔高效格砖，提高加热面积；采用分离型余热回收装置预热助燃空气和煤气等。

A series of measures for realizing high blast temperature and long campaign have been taken in the design of ex- ternal combustion type hot air stove provided by Nippon Steel for 4350m~3 blast furnace newly built in Taiyuan Iron and Steel Co.

在新建的太钢4350m~3高炉新日铁外燃式热风炉的设计中，围绕高风温长寿命采取了一系列措施：蓄热室、燃烧室、混风室内墙体与拱顶的拱角相接处，采用迷宫式结构，防止独立砌体间窜风；在开孔部位采用组合砖，以提高这些关键部位的气密性和结构稳定性；蓄热室内采用带凹凸槽的小孔径七孔高效格砖，提高加热面积；采用分离型余热回收装置预热助燃空气和煤气等。

The production of this dissertation was successfully applied to the air-borne UWB SAR system, and proved to be feasible and efficient.

论文的研究成果已应用于机载超宽带合成孔径雷达系统中，并成功进行了飞行试验，性能优良，工作可靠。

Effects of reaction time on SBET , pore volume, average pore diameter and coke over Co - ZSM - 5 zeolite under aldehyde - ammonia condensation were discussed.

本文在研究反应时间对醛氨缩合催化剂Co-ZSM-5分子筛比表面积、孔体积、平均孔径及积炭量的影响中发现，Co-ZSM-5分子筛催化剂的失活过程经历四个阶段：高水平活性稳定期、活性衰退期、低水平活性稳定期和二次活性衰退期四个阶段。

Based on the analysis of one type high-speed gas bearing working principle, the bearing diameter of axle static carrying force model was set up, and the relationship between bearing clearance gas flow rate, intensity of pressure and orifice radius were analyzed, along with the diameter of axle movement tracking under the centrifugal force in the low rotating speed was found.

在分析一类高速气浮轴承工作原理的基础上，建立其轴径轴承的静态承载力模型，并据此分析出轴承间隙中气体流量、压强与节流孔孔径间的相互关系，以及在低速运转下受离心力作用的轴径中心运动轨迹。

At last, taking one earthqua ke as an example, this paper gives three-dimension patterns of radius of the field with epicenter distance and azimuth as well as frequency.

最后， 以一次地震为例，给出了孔径随震中距、方位角、频率变化的三维图象。

A new motion compensation algorithm dealing with spatially variant phase error in azimuth direction is purposed in this article.

摘要该文提出了一种用于机载合成孔径雷达的方位向空变相位误差补偿算法。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。