多层的

As the foundation of ultrasonic testing of composite materials, this thesis is intended to explore in detail a number of features of wave propagation in anisotropic plates, and the following essential problems will be considered:(1) Propagation of plane bulk waves in homogeneous and orthotropic anisotropic media;(2) Lamb wave propagation in multilayered anisotropic plates;(3) Influence of isotropic solid or liquid loading on Lamb wave propagation in anisotropic solid media;(4) Influence of interface layers on Lamb wave propagation in layered anisotropic composite laminates;(5) Dispersion characteristic analysis of attenuation Lamb wave while existing an thin viscous layer which is used for simulating the poor curing in adhesively bonded joints.

作为复合材料超声检测的基础，本文研究了如下国际前沿性的课题：（1）平面体波在正交均匀各向异性媒质中的传播；（2）多层各向异性媒质中Lamb波的传播；（3）各向同性固体或液体负载对各向异性固体媒质中Lamb波传播的影响；（4）界面层对层状各向异性复合媒质中Lamb波传播的影响；（5）胶粘剂未固化而呈现粘弹性时粘接结构中衰减Lamb波的频散特性分析。

The improved e-N method can also yield results well agree with those obtained by DNS.4 The transition prediction for boundary layers on cones with different key parameters such as angle of attack, cone half angle and the Mach number of the coming flow, have been made, to show the reliability of the modified e-N method.5 For the calculation of base flow, boundary layer equations can be used in the case of small angle of attack.

但是它要依赖于对初始扰动的正确预估，这显然又取决于更多飞行数据的积累和分析。e-N方法的转捩预测结果与直接数值模拟得到的结果也吻合较好。4通过对不同来流攻角、不同半锥角和不同马赫数的三维圆锥边界层的转捩位置进行预测，证实了改进的e-N方法对于三维边界层转捩预测是可靠的。5对于基本流的计算，边界层方程可以用于小攻角的情况，其计算量远远小于直接数值模拟，但背风面的剖面不可靠。

In order to solve the problems from obtaining reservoir's formation pressure and injectivity index of each zone by conventional methods,combined with percolation theory and the characteristics for continuous measuring the data of flow,pressure in setting the water injection profile logging unit in one run,a new method is proposed for de.

针对常规方法获取分层吸水指数存在的问题，结合渗流理论和注水剖面测井一次下井能连续测量流量和压力的特点，提出了测井时多次改变井口注水量，通过注水剖面资料的处理确定各储层的相对吸水量、确定各储层的地层压力和吸水指数的方法，由此还能掌握各储层地层压力和吸水能力的差异。

Since there\'s inlayer heterogeneity in layered sandstone reservoirs and remaining oil potentials are mainly in thin or poor layers, which are mostly in delta front facies growth, this paper studies physical characteristics parameters interpretation methods for delta front deposit reservoirs to deepen the acknowledge to the depositional modes and features for further implementing the develop adjustment potentials and optimizing the potential tapping adjustment patterns. This practice has an important guiding sense to enhance the ultimate production recovery for mature oilfields.

我国大多数主力油田都属于陆相河流—三角洲沉积储层，如大庆的喇嘛甸、萨尔图和杏树岗等油田，这些油田基本上均已进入高含水后期开采阶段，尤其是以河流相发育为主的主力油层综合含水已达到90%以上，由于多油层砂岩油田存在层间的非均质性，油田的剩余油潜力主要集中在以三角洲前缘相发育为主的薄、差油层中，因此研究三角洲前缘相沉积储层的物性参数解释方法，深化其沉积模式及沉积特征的认识，进而落实油田开发调整潜力，优化调整挖潜方式，对提高老油田最终采收率具有重要的指导意义。

It is embodied concretely:(1) With the adoption of grouting bolts, the cranny in wall rocks can be blocked up, the air can be isolated, the wall rocks can be prevented to be weatherized and make water, the strength of wall rocks can also be avoided to be lowered;(2) The lax broken wall rocks are commentated to a whole by liquid after they were grouted and the rock"s strength is increased, so the wall rocks become a part of the support structure by using itself and become a whole with the original rock, and the roadway is made to keep stable but not easy to be broken;(3) The spray layer wall are filled with liquid after grouting, the stress is avoided to be concentrated because the load could be evenly acted on the spray layer and the support;(4) The pressure acted on the plank can be delivered to the two sidepieces and then to the bottom by reinforcing the sidepiece; At the same time, the concentration degree of loads acted on the motherboard can be weaken because of the enlargement of the combination arch"s thickness, as result, the rock"s stress is lowered and the heaving is alleviated;(5) The common bolt is made to be fixed the whole length after grouting, the layers are connected to a integral whole and bear the weight of loads, so the support structure"s unity is increased.

具体体现在：(1)采用注浆锚杆注浆，可以利用浆液封堵围岩裂隙，隔绝空气，防止围岩风化，且能防止淋水和渗水，避免围岩被水浸湿而降低围岩的本身强度及造成的巷道变形。(2)注浆后浆液将松散破碎的围岩胶结成整体，提高了岩体强度，实现利用围岩本身作为支护结构的一部分，且与原岩形成一个整体，使巷道保持稳定而不易产生破坏；(3)注浆后使得喷层壁后充填密实，保证荷载能均匀地作用在喷层和支护上，避免出现应力集中点而首先破坏；(4)注浆后使作用在顶板上的压力能有效地传递到两帮，通过对帮的加固，又能把荷载传递到底板；同时由于组合拱厚度的加大，这样又能减小作用在底板上的荷载集中度，从而减小底板岩石中的应力，减轻底臌；(5)注浆加固后能使普通端锚锚杆实现全长锚固，它们共同将多层组合拱连成一体，共同承载，提高了支护结构的整体性。

The UV and IR spectroscopic studies of the monomer films showed that the photoreaction ratio of monomer (about 50%) was higher than the corresponding photosensitive polymer (about 10%, PVCi). The polarized IR spectra proved that obvious anisotropic absorption was displayed in the irradiated photosensitive film. With polarizing microscopy method, we found that these kinds of photoalignment films exhibited good alignment ability, and the stability of the photoalignment film could reach about 100℃. 2 A photosensitive self-assembled monolayer was fabricated that contained photo-cycloadditable groups, such as, coumarin and cinnamate. The reaction process were detected by contact angle method because the IR absorption of monolayer was very weak. The photosensitive self-assembled monolayer promote uniform alignment of nematic liquid crystals by LPUV, and it thermal stability could reach about 130℃. 3 A cationic bolaform amphiphiles was synthesized that had two photosensitive double bonds, and can be polymerized by ultraviolet. A layer-by-layer self-assembled deposition film was prepared in aqueous solution by using this material and poly (sodium 4-styrenesulfonate). The UV-Vis. spectra proved that the multilayers film was uniform and layer-by-layer. When LPUV irradiated the film, the photopolymerizable double bond underwent [2+2] cycloaddition, and the production of the reaction distributed along the polarized direction of incident LPUV. Polarized UV-Vis. spectra indicated that the irradiated self-assembled multiplayer film was anisotropic, and the dichromic ration is about 0.09, it is higher than the spin-coating method of photosensitive polymer or monomer. We used this anisotropic film as alignment layer of nematic liquid crystals, and obtained a uniform and stability alignment result, the static contrast ratio is about 100, which is very close to application of liquid crystal device. This thesis is an instance that the photochemical material was used in the physics region of liquid crystals, the route that was from photosensitive monomer, self-assembled monolayer film to self-assembled multiplayer film was undergone, by this logical research method photoailgnment of liquid crystal was extended and consummated.

围绕上述思路开展了如下工作：1合成了三种可进行光二聚反应的光敏小分子单体，LPUV 辐照制作了光控取向膜；用紫外-可见光谱法和红外光谱法分析了薄膜中的光化学反应，发现小分子的光反应程度可达到50%以上，至少比光敏高分子高出5倍；薄膜的偏振红外光谱证实，经过LPUV 辐照后薄膜出现了明显的各向异性；将小分子光控取向膜制成液晶器件，在偏光显微镜下观察看到均匀一致的液晶取向；并且热稳定性达到100℃左右，接近实用化要求。2制备了含肉桂酸、香豆素基团的自组装单层膜；采用接触角的方法监测自组装反应的动力学过程；紫外-可见光谱证实了自组装单层膜在石英基板表面形成；自组装单层膜经LPUV 辐照后能诱导液晶均匀取向，而且热稳定性可达130℃，热稳定性进一步提高。3合成了含有光敏双键的双季铵盐，在水溶液状态下将它和聚乙烯基苯磺酸钠沉积生成layer-by-layer 自组装多层膜，紫外-可见光谱证实这是一个逐层均匀的沉积；在LPUV 照射下，自组装膜中的光敏双键按照偏振方向发生[2+2]环加成反应，形成取向膜，用二向色性值评价的分子取向度高于高分子及小分子光控取向膜的水平；实验证明用自组装多层膜制成的液晶器件亮暗态均匀，静态对比度约为100，达到实用化器件的水平。

The results show that multi-lever and multi-strand horizontal submerged jets are a new energy dissipation type and have better stability of flow patter,lower velocity in the slab and higher dissipated energy rate than the single-lever and the multi-strand horizontal submerged jets.

研究表明，多股多层水平淹没射流较单层多股水平淹没射流流态稳定性好、临底流速低、消能率高，是一种高效的新型消能方式。

A self-containing model for the prediction of the production decline of a water flooded candstone oil reservoir is established by the application of a method of multilayer staged prediction (1) combined with the method of muleiple variables, multiple steps self-checking recurrence prediction (2) based on the analysis of the statistics of changes in the withdrawal rate in a seguence of time.

在分析研究系统的产量变化时间序列统计规律基础上，采用多层递阶预报和多变量多步自校正递推预报器，分别建立了水驱砂岩油田产量递减自适应预报模型。

According the principle of rock volumetric model, the optimal algorithm was used to establish a model of multi-mineral lithologies. On the basis of lithological recognition, reservoirs were recognized and identified.

首先根据岩石体积模型原理，采用最优化算法建立多矿物岩性模型；在识别岩性基础上，进行储层识别和划分；利用成像资料刻度裂缝孔隙度参数，采用双孔隙度算法计算储层的含油饱和度。

WSi2/Si multilayer Laue lens with 324 layers and a total thickness of 7.9 \mu m is successfully fabricated using direct current magnetron sputtering method.

Laue透镜外层理论衍射效率达到60%，聚焦分辨率达到10.5nm。利用直流磁控溅射成功制备了总层数为324、总厚度为7.9μm的WSi2/Si多层膜Laue透镜。

For a big chunk of credit-card losses; the number of filings (and thus charge-off rates) would be rising again, whether

年美国个人破产法的一个改动使得破产登记急速下降，而后引起了信用卡大规模的亏损。

Eph. 4:23 And that you be renewed in the spirit of your mind

弗四23 而在你们心思的灵里得以更新