多元醇

A series of polyether based polyurethaneurea aqueous dispersions with well-defined hard segment s were prepared by fractional steps with polyether polyol, 4,4′-diphenylmethane diisocyanate,dimethylolpropionic acid,1,4-butanediol,isophorone diisocyanate and ethylenediamine.

以二苯基甲烷二异氰酸酯、二羟甲基丙酸、1，4-丁二醇、异佛尔酮二异氰酸酯和乙二胺为硬段，聚醚多元醇为软段，通过分子设计采用分步合成法，制备了具有规整硬段和良好分散性能的聚醚型聚氨酯脲水分散液。

A series of maleopimaric acid polyester amino resins were made from maleo￣pimaric acid polyesters crosslinked by etherified melamine formaldehyde resins.

以马来海松酸和线性小分子二醇为原料，合成马来海松酸聚酯多元醇，再用氨基树脂交联，制备马来海松酸聚酯氨基树脂。

By two steps, the material is obtained by the method that polyhydric alcohol, diisocyanate and a diatomic alcohol chain extender with 8-18 C-structural branch chains are mixed and poured into a polyurethane elastomer that achieves a damping effect through the combination and dissociation of a hydrogen bond between the branch chain and the main chain for consuming energy.

该类材料是通过两步法将多元醇、二异氰酸酯和带有8～18个C结构支链的二元醇扩链剂混合浇注成聚氨酯弹性体，通过支链与主链之间氢键的结合与解离消耗能量，起到阻尼效果。

The first, selecting Mannitol of polyhydric and Dextran ofpolysaccharide as subsidiary material, In accordance with differentusing quantities, making up eight recipes, freeze-drying test is madewith eight recipes differently. By adjusting recipe, to select themethod of two factors three levels. The best recipe determined is thatof Mannitol(160mg/bottle) and Dextran(40mg/bottle), Solving theproblem of description、moisture(≤1.5%)、solution(≤6s)、stability(95.0～110.0%) etc., The quality of preparation has beenimproved.

首先，选择赋形剂多元醇类的甘露醇和多糖类的右旋糖酐作为辅料，按照不同的用量，组合成8种处方进行冷冻干燥试生产，采用二因素三水平的满因子分析法，通过处方调整，确定甘露醇160mg／瓶、右旋糖酐40mg／瓶为最佳处方，解决了冻干制剂在性状、水分(≤1.5％)、溶解性(≤6s)和含量稳定性(95.0～110.0％)等方面的不足，提高了产品质量。

A study was conducted to synthesize oligoester alcohol s from poly production wastes via transesterification with diethylene glycol and tribasic alcohol.

将涤纶废产物用二甘醇和三元醇经酯基转移合成齐聚酯多元醇，并用其制备聚氨酯硬质泡沫塑料。

Flame—retardant resin was prepared by the condensation and polymerization of phosphoric acid, trihydroxy methyl propane and epoxy chloropropane,the resin was then reacted with hexane diacid and diglycol under certain condition ,resulting in polyol containing 1.5% P and 17— 18% polyester polyol, which was foamed with polyisocyanate, water and catalyst by one— step method, producing fire...

通过磷酸、三羟甲基丙烷和环氧氯丙烷的缩合和聚合反应制得阻燃树脂，然后将它与己二酸、一缩二乙二醇在一定条件下反应制得含P1.5%和含Cl17～18%的聚酯多元醇，再将它与多异氰酸酯、水、催化剂等组分采用一步法发泡工艺制得阻燃聚氨酯软泡塑料。

Flame— retardant resin was prepared by the condensation and polymerization of phosphoric acid, trihydroxy methyl propane and epoxy chloropropane,the resin was then reacted with hexane diacid and diglycol under certain condition ,resulting in polyol containing 1.5% P and 17— 18% polyester polyol, which was foamed with polyisocyanate, water and catalyst by one— step method, producing fire—resistant PU soft foam.

通过磷酸、三羟甲基丙烷和环氧氯丙烷的缩合和聚合反应制得阻燃树脂，然后将它与己二酸、一缩二乙二醇在一定条件下反应制得含P1.5%和含Cl17～18%的聚酯多元醇，再将它与多异氰酸酯、水、催化剂等组分采用一步法发泡工艺制得阻燃聚氨酯软泡塑料。

A range of waterborne alkyd resins has been prepared by fatty acid process, based on soybean fatty acid, trimellitic anhydride, and various polyols and polybasic carboxylic acids, which are modified with benzoic acid, maleic anhydride and oleic acid.

通过脂肪酸法，选用豆油脂肪酸、偏苯三甲酸酐和不同的多元醇、多元酸制备了一系列水性醇酸树脂，用苯甲酸、顺丁烯二酸酐和油酸对其改性进行了研究。

Oil and polyol firstly hydrolyze, and then react with maleic anhydride to give semi ester, the residual maleic anhydride hydrolyzing to give maleic acid, finally are adducted with DCPD. The result of experiment shows that the synthesized resin is of perfect air drying performance and improved flexibility and anti-greening because of the use of oil, meetin...

试验结果表明，油与多元醇在210～220℃下先醇解，然后与顺酐反应形成半酯，剩余顺酐水解成顺丁烯二酸，然后与DCPD加成，合成的树脂具有优良的空干性；同时油的使用极大地提高了涂膜的柔韧性和抗绿化性，得到的树脂性能上可满足涂料用不饱和聚酯树脂的要求。

Synthesis of polyester polyol of sebacic acid series;2. Study on catalyst used to synthesis of polyester polyol ;3. A series of polyester-based thermoplastic polyurethanes elastomer were prepared from polyester polyol ,diphenylmethane-4,4'-diisocyanate and 1,4-butanedio by one-step process.

以聚酯多元醇、4，4'-二苯基甲烷二异氰酸酯和1，4-丁二醇为原料制备了一系列聚酯型热塑性聚氨酯弹性体，对硬段含量、软段种类和软段的分子量等分子结构参数对其力学性能和阻尼性能的影响进行了研究，探索影响规律性，采用原子力显微镜对其软/硬段微相分离结构进行了研究。

It has been put forward that there exists single Ball point and double Ball points on the symmetrical connecting-rod curves of equilateral mechanisms.

从鲍尔点的形成原理出发，分析对称连杆曲线上鲍尔点的产生条件，提出等边机构的对称连杆曲线上有单鲍尔点和双鲍尔点。

The factory affiliated to the Group primarily manufactures multiple-purpose pincers, baking kits, knives, scissors, kitchenware, gardening tools and beauty care kits as well as other hardware tools, the annual production value of which reaches US$ 30 million dollars.

集团所属工厂主要生产多用钳、烤具、刀具、剪刀、厨具、花园工具、美容套等五金产品，年生产总值3000万美元，产品价廉物美、选料上乘、质量保证，深受国内外客户的青睐