复合

So,in this thesis,with regard to the stability and deformation of composite soil-nailing in soft clay foundation pit, the studies listed below were carried out, considering current research and design status of the soil nailed retaining structure. 1 Based on the use of leading pile with soil nailing protection, studied the work mechanism of mini-pile with composite soil-nailing, the model of stability analysis of the composite soil-nailing is established and examined by analysis engineering case.

因此本文鉴于软粘土地区深基坑工程土钉支护结构的研究及设计现状，在前人研究的基础上，就复合土钉支护软粘土基坑的稳定性和变形展开相应的专题研究，主要完成了以下几个方面的工作： 1针对软土条件超前桩的应用，研究了桩加土钉的复合土钉支护机理，建立了复合土钉支护稳定性分析模型和计算公式，并对工程实例进行计算分析，检验了模型。

Mm×400mm fiber reinforced composite material armor panel behind the ship's C type steel panel was used to simulate warsh ip's light composite armor, and the ballistic velocity penetration experiments for the different FRC armor panel and the different structural status, such as space certain clearance or no between the two parts, have been done.

采用纤维增强复合材料板前置船体结构钢板模拟舰用轻型复合装甲结构，对有间隙和无间隙复合装甲结构以及不同纤维增强复合材料防弹板进行了打靶实验研究，实验测试了不同纤维增强复合材料防弹板以及有间隙和无间隙复合装甲结构抗弹丸穿甲的吸能量。

In order to improve the life of cement concrete bridge deck pavement,compound beam test was used to research the fatigue characteristics of hot mixed asphalt courses on bridge deck,finite element analysis method was employed to make the mechanical response of compound beam accord with that of actual bridge deck under the same load,the fatigue test was done for compound beams with different pavement structures.

为了提高水泥混凝土桥面沥青混凝土铺装的使用寿命，以复合梁试验评价不同的桥面沥青铺装结构的疲劳性能，采用有限元法分析荷载作用下复合梁试件具有与实际梁体一致的应力响应，并采用复合梁疲劳试验测试不同桥面沥青铺装层组合的疲劳寿命。

In the end, the synthesis condition and influential factors of PU-titania (TiO2) process, such as manufacturing sol (including the amount of water, the amount of PU/Titanium butyrate, the concentration of the solution, the pH value, the kind of alcohol), aging process, theoretical analysis of the dipping process, dry and heat treatment of the gelation, were also discussed especially. FT-IR、SEM、TEM、DLS techniques were applied to analyze and study the reaction mechanism and watch the surface and section of the PU-TiO2 membrane. According to above, it was inferred that PU-TiO2 membrane (containing K600) was better composite.

本文采用原位合成法制备了聚氨酯-二氧化钛水分散复合体，并着重对影响制备稳定透明的复合体的因素（包括加水量、醇的加入量、pH值、聚氨酯/钛酸四丁酯投入量、醇种类）进行讨论，利用红外光谱技术分析聚氨酯-二氧化钛分散复合体的结构，动态光散射技术与扫描电镜分别表征复合分散体的粒径大小与分布及复合膜的表面形态，结果显示含K600的聚氨酯-二氧化钛体系复合情况良好。

The excavation surface model of the composition geologic strata for the shield machine was established, in which the soft soil and hard rocks are taken into account simultaneously. In terms of the cutting mechanism of the individual disc cutter and drag scraper, the total bending moment model on the cutterheads of shield machines was proposed. The bending moment behavior was discussed when the shield machine excavates in the composition geologic strata.

针对盾构机在掘进过程中上软下硬的复合地质结构，建立了其刀盘截面圆模型，基于单个切削刀和盘形滚刀的切削机制，建立了复合岩土层掘进时刀盘平面内总弯矩分析模型，分析了与刀盘接触的撑子面内，不同软土面积分数的复合地质条件下，刀盘旋转掘进过程中的弯矩动态特性。

The problem in using titanium dioxide as a photocatalyst is recombination of electron and hole. One strategy for inhibiting theirs recombination is to add other electron accepters to the reaction. It can reduce the electron/hole recombination and then produce more ·OH on the surface of titanium dioxide, from which increased the degradation rate of the pesticide.

二氧化钛作为光催化剂进行光催化降解的问题在于电子—空穴对的重新复合，抑制其重新复合的一种办法是加入其他的电子接受体，减少电子—空穴对的复合，从而使光催化剂TiO2表面产生更多的·OH自由基，加强农药的光催化降解。

A fiber plastic tube with infiltration resistance membrane is dipped with composite resin to form a composite flexible tube, than the tube is turned inside out by hydraulic pressure and, as a lining, adhibited on inner wall of an old pipeline.

该技术采用有防渗透薄膜的纤维塑料软管，并经复合树脂充分浸渍形成纤维塑料复合软管，再通过水压将软管翻转并内衬在需修复的旧管道内壁，固化后形成一条坚固光滑的纤维塑料复合新管。

Different types of clothing of the composite material made of fabric, or suitable for clothing, sportswear, big jacket, jackets, shoe materials, gloves, brassieres, handbags, hats, furniture, sofa, toys, cushions, curtains , Baby carriages, noise and other materials 6, tpu affixed with waterproof breathable waterproof membrane film has a unique waterproof materials, windbreak, permeability, soft, washable the movement of sweat can be generated by steam quickly from in vitro, Dress is hot and will not be able to regulate body temperature appropriate to maintain the body dry, complex breathable waterproof membrane applied to sportswear, big jacket, windbreaker, raincoats, Fang Hanfu, gloves, caps, military special clothing, shoe materials, affixed with waterproof Film can be applied to waterproof shoes, sport shoes, Air Shoes, sports Hudian, pu foam, medical mattresses, sleeping bags, and so on.

成衣复合不同种类的材料复合后做成的面料或内里适合于成衣，运动服，大褛，夹克，鞋材，手套，胸围，手袋，帽，家私，沙发，玩具，座垫，窗帘，婴儿车，隔音材料等 6、tpu防水膜贴上防水透气薄膜的材料具有独特防水，防风，透湿，柔软，耐水洗的特性能将运动时流汗所产生的水蒸气迅速排出体外，使穿着时不会感到闷热并且能适当调节体温，保持身体干爽，复合防水透气膜适用于运动服，大褛，风衣，雨衣，防寒服，手套，帽，军用特种服，鞋材等，贴上防水胶膜可适用于防水鞋，运动鞋，气垫鞋材，运动护垫，pu发泡，医疗用床垫，睡袋等。

Then on the basis of comparative analysis on Central Composite Design which including Central Composite Circumscribed design,Central Composite Inscribed design and Central Composite Face-centered design in RSM, the paper proposes methods concerning how to choose experiment design of combined array.

本文针对RSM的中心复合设计——外切中心复合设计、嵌套中心复合设计和面心立方设计进行了比较评价，并给出了结合表实验设计的选择方法。

Based on the formers' studies, the behavior and mechanism of the structure are systematically analyzed by the FEM and the elastic-plastic theory in order to meet the need in engineering, and some valuable conclusions are obtained, which can be taken as references in design and construction.

本文在前人研究的基础上，根据目前深基坑复合土钉支护的研究现状和工程实际的需要，采用有限元和理论分析方法对深基坑复合土钉支护进行了系统全面的分析和研究，得到了一些有益的成果，对复合土钉支护的设计与施工具有重要参考价值。

This one mode pays close attention to network credence foundation of the businessman very much.

这一模式非常关注商人的网络信用基础。

Cell morphology of bacterial ghost of Pasteurella multocida was observed by scanning electron microscopy and inactivation ratio was estimated by CFU analysi.

扫描电镜观察多杀性巴氏杆菌细菌幽灵和菌落形成单位评价遗传灭活率。