复合

Many plastic laminated products requires a high degree of transparency, you need to use the large-area blank basement membrane to complex, but in the process of dry compound appear harmful plastic laminated transparency, fail to achieve quality requirements, such as a production of radiofrequent "" fog,"""小麻 point," wave jezoensis tablets,"" silk sheath,"" musheoom umbrella cloud, splashing "" drop of powder and so has affected the transparency of the complex product, which even composite product scrap.

许多塑料复合软包装产品都要求具有较高的透明度，因此需要使用大面积空白基膜去复合，但是在干式复合工艺中，往往出现塑料复合软包装透明度不良或下降，达不到质量要求，例如成品呈"雾状"，出现"小麻点"、"波浪鱼鳞片"、"丝纹"、"蘑菇伞云"、"滴水散溅"等现象，影响了复合成品的透明度，严重时甚至使复合成品报废。

Although many results have been obtained, there are still a number of very interesting questions about composition operators unsolved. There is much more to be learned about the collective compactness and convergence of composition operator sequences, compactness of various product of composition operators, cyclicity, closed range and spectra of composition operators in various settings. Commutants of composition operators seem to be very difficult to characterize. Only a little is known about their reducing invariant subspaces. There has been no work on C〓 algebras generated by composition operators.

尽管已取得如此丰富的结果，但是关于复合算子仍然有大量非常有意义的问题值得研究，例如：复合算子序列的总体紧性及收敛性、复合算子的各种乘积的紧性、复合算子的闭值域问题、复合算子在各种解析函数空间上的谱的描述、换位复合算子的刻画、复合算子诱导的不变子空间问题、循环复合算子的研究、由复合算子生成的C〓-代数的研究、不同解析函数空间之间的加权复合算子及复合算子半群等等问题。

This paper presented the research and exploration of mechanism and technics as well as the design of the magnetic circuit of this new compound machining, based on above, establishing the parameter model, meantime, analyzing influential effects on productivity of magnetic and EDM compound machining the holes through large numbers of experiments, including velcoity contrast experiments of pre-compound and after-compound machining with the change of current, velcoity contrast experiments of pre-compound and after-compound machining with the change of magnetic induction, velcoity contrast experiments of pre-compound and after-compound machining with the change of impulse width, experiments of the superficial roughness, experiments of the Electrode wastage, and intersectant experiments analysis as well as the change experiments of current waveforms. Through a number of experiments we analysed the influential effects of magnetic and EDM compound machining, compared the factors with EDM by oneself. A large of experiment records and deducibility have demonstrated that the productivity of magnetic and EDM compound machining is developed by 20%～400% than traditional EDM.

本论文对磁场电火花复合加工这种新的复合加工的机理、工艺和复合加工的磁路设计进行了研究和探索，在此基础上，建立了磁场电火花复合加工的参数模型，同时通过大量的随着电流变化磁场电火花复合前后加工速度对比实验、磁感应强度变化时的加工速度变化实验、随脉冲宽度变化的加工速度实验、表面粗糙度实验、电极损耗量实验、磁场电火花复合加工正交实验分析、电流波形变化等实验，实验分析了影响磁场电火花小孔加工效率的因素，并且跟单一的电火花加工中的影响因数进行了比较，大量的实验数据和理论推导证明磁场电火花复合加工比传统的单一电火花加工的效率提高了20％～400％左右。

With the engineering data , the strut frame made of composed soil nails is analyzed with the program ababqus , and the effects of the distortion characters , the property of the deposition of the ground , the mechanical property of the soil nails , the variation of the length and the separation of the soil nails , and the diametric of the mixing piles on the strut frame made of composed soil nails , and the distortion property of the strut frame made of composed soil nails under different ground conditions

在总结前人的研究成果下，针对复合土钉墙构造的特点，建立了模拟复合土钉墙受力变形的计算模型，并结合工程实测资料，运用大型通用有限元程序ababqus对复合土钉墙进行了有限元分析，详细讨论了复合土钉支护结构开挖过程中的变形特性、地面沉降性状、土钉受力性状；土钉长度变化、土钉间距变化、搅拌桩桩径变化对复合土钉支护结构的影响；复合土钉支护结构在不同地基条件下的变形特性。

A device and method for preparing compound nano fiber endless tow, which contains feeding material liquid to pair of electric spinning nozzle on frame, each nozzle respectively applied with high dc voltage with opposite polarity, each pair of nozzle jetting out nano fiber with opposite electric charge, said nano fiber attracting and colliding each other to form compound nano fiber, then forming nano fiber endless tow after drawing and stretching, the first opposite set pair of electric spinning nozzle jetted compound nano fiber endless tow is stretched down and used as acceptor which covered by the nano fiber jetted by second pair of nozzle an d forming two layers of compound nano fiber endless tow after drawing and stretching, in turn to get multilayer compound nano fiber endless tow after drawing and stretching by godet roller.

复合纳米纤维长丝束制备装置及其制备方法是一种简单、高效电纺制备纳米纤维长丝束的方法，其步骤为将料液输送给支架(3)上的电纺喷头对(1)；喷口相向的电纺喷头对(1)的每个喷头分别施加相反极性的直流高电压；每对相向喷口喷出分别带相反电荷的纳米纤维，并在空中相互吸引、碰撞形成复合纳米纤维，经牵引、拉伸后形成复合纳米纤维长丝束；第一对相向放置的电纺喷头纺丝形成的复合纳米纤维长丝束向下拉伸，并作为接受体与第二对电纺喷头喷出的分别带相反电荷并相互吸引的纳米纤维在空中相遇，被第二对电纺喷头喷出的纳米纤维包裹，经牵引、拉伸后形成两层复合纳米纤维长丝束；依次类推，最后经导丝辊对(2)牵引、拉伸后得到多层复合纳米纤维长丝束。

Then the pile-soil stress characteristics and stabilizing mechanism of the composite foundation are fully discussed. Based on the close analysis of the influence factors of the vertical bearing capacity, circular aperture extension theory is employed to establish the computing formulas for the pile vertical stress and the foundation vertical bearing capacity, respectively. Moreover, with analyzing the features of the calculation parameters such as materials of gunite mortar, jet pressure, diameter of the jet pipe, pile length, pile layout, a design theory for chemical churning pile composite foundation is proposed. Then, the variation of the pipe deformation with loads, the deformation coordination of pile and soil are studied. And methods to decide pile-soil stress ratio and the compressive modulus are developed. Meanwhile, the corresponding design method and the design parameters are proposed. In addition, studies for construction technique and quality detection of the chemical churning pile composite foundation are presented.

在此基础上深入探讨了旋喷桩的桩土受力特性及其复合地基的加固机理，从影响旋喷桩复合地基竖向承载力的因素入手，基于圆孔扩张理论给出了桩体竖向应力及旋喷桩复合地基的竖向承载力计算公式；通过对喷射浆液、喷射压力选取、喷射直径估算、桩长及桩位设计等各种计算参数的深入分析和研究，提出了一套相应的旋喷桩复合地基设计计算方法；通过计算分析，深入探讨了旋喷桩复合地基变形随荷载变化规律、桩和桩间土变形协调关系、桩土应力比及复合地基压缩模量的确定，并提出相应的设计方法和修正参数；此外，结合工程应用，对旋喷桩复合地基的施工技术及其现场质量检测方法进行了较全面的探讨。

The B3LYP/6-31G calculations on the four complexes show that the largest interaction energy is-13.98 kJmol^(-1) in the complex composed of HMX and hexaazacalix [3]-p-triarene [3]-2-amido-1, 3, 5-triazine. Results show that intermolecular interaction energies of azacalix [6] arenes with substituted groups are stronger than that without substituted groups, and intermolecular interaction energies of azacalix [6] arenes with amido groups are stronger than that with nitryl groups.

研究发现分子间相互作用能最大的复合物是六氮杂杯[3]-对－三芳烃[3]-2-氨基－1，3，5-三嗪与HMX所形成的复合物，最大相互作用能为－13.98 kJmol^(-1)；而且带有取代基的复合物的相互作用能大于没有带取代基的复合物，带有氨基取代基的复合物的相互作用能大于带有硝基取代基的复合物。

The primary studying works and characteristics:1 To summarize reinforcing theory of cement mixing pile composite foundation2 To analyze the primary mechanics characters and changing rules of cement mixing pile, based on analysis of test data both indoor and outdoor.3 To discuss siding frictional resistance, ending resistance, ultimate bearing capacity of simple mixing pile and effectiveness factor of grouped piles, loading ratio of soil between piles under cushion cap of grouped piles and stress ratio of pile and soil and so on, and use many computation method and experimentation method to ensure bearing capacity of mixing piles composite foundation.4 To point out and analyze eight sides flaws and problems of the bearing capacity calculation method of mixing pile compositefoundation which ensured by national and normative method/ formula.5 To apply test results of loading tests and a few settlement observation data, use gray theory to predicate ultimate bearing capacity of deep mixing piles, actual example demonstrate engaging between theoretical predicted value and actual value.6 To apply groovy layerwise summation method to discuss entity piles method, double foundation method, equivalent layerwise summation method and consolidation theoretical method and so on, especially by combination of engineering example, use FEM to calculate or discuss the settlement and changing rules of composite foundation.7 To discuss problems of critical length of composite foundation by combination of engineering example and numerical analysis method, and analyze the contrast of critical length between simple pile load and most area load of composite foundation, not only critical length of composite foundation is relative to modulus ratio between piles and soil, but also upside load distribution area of composite foundation.

主要的研究工作与特色为：(1)总结了水泥搅拌桩复合地基的加固原理；(2)在对室内外试验资料进行统计分析的基础上，系统分析了搅拌桩水泥土的主要力学特性及其变化规律；(3)探讨了搅拌单桩的侧摩阻力、端阻力、极限承载力及群桩效率系数、群桩承台下桩间土荷载分担比及桩土应力比等，提出用多种计算方法并结合试验方法来综合确定搅拌桩复合地基的承载力；(4)明确指出和分析了按国家有关规范的方法确定搅拌桩复合地基承载力所存在的八个方面的缺陷与问题；(5)利用过去没有加载至破坏阶段的载荷试验成果和较少的沉降观测数据，尝试了用灰色理论预测深层搅拌桩的极限承载力，实例表明理论预测值与实测值吻合较好；(6)在常规分层总和法的基础上，探讨了复合地基沉降计算的实体墩基法、双层地基法、等效作用分层总和法、固结理论法等，特别是结合工程实例，用有限元数值计算等方法计算和讨论了搅拌桩复合地基的沉降及其变化规律；(7)结合工程实例，用数值分析方法探讨了复合地基临界桩长的问题，指出和分析了单桩荷载下的临界桩长与复合地基大面积荷载下的临界桩长存在很大的差别，复合地基的临界桩长不仅与桩土模量比有关，而且与复合地基上部荷载分布面积有关。

There is a great variety of tectonic compounding the basic types of which include the compounding of various structural features, and that between structural features and geological formations as well as that of various geological formations. The compounding structures may be either autochthonous or allochthonous;they may also comprise structural features caused by the same manner of tectonic movements or by different manner of tectonic movements ;and finally ,there may be compounding of structures of all sizes ranging from microscopic ones up to tectonic belts or even tectonic domains.

构造复合存在多种多样的形式，其基本形式不仅包括各种形迹的复合，建造与形迹的复合，而且包括建造与建造的复合；就其复合的空间位置而言，既有原地的复合，也有异地的复合；就运动方式而言，既有同方式运动的复合，也有不同方式运动的复合；就构造复合的规模和等级而言，小至小型或显微构造，中至露头规模的构造形迹复合，大至构造带、构造地块、构造体系乃至巨型构造域的复合。

The second part was to test the appearance, ingredient analysis, surface potential, thermal conduction properties, and magnetism of the nano composite fluid prepared from the parameters. The experiment found that unoxidized particles, Ag, Cu, Fe, and Ni appeared round. If combined with oxygen in water as oxides, the nano particles would grow toward certain directions. In copper/iron nano composite fluid, FeO appeared cubic, Cu2O appeared coniferous. In silver/iron nano composite fluid, FeO was polygonal. In dielectric potential detection, the nano composite fluid was likely to aggregate and deposit, except for silver/iron set. In other sets, the pH of silver/cobalt nano composite fluid was 7, surface potential was 21.21mV; the pH for silver/nickel nano composite fluid was 6.5, surface potential was 21.04mV; the pH for copper/iron nano composite fluid was 7, surface potential was -30mV. The fluid particles of the three sets could all maintain suspension of 2 weeks or more. For thermal conduction, the silver/nickel, nano composite fluid showed the best thermal conduction. Under temperature of 30℃ fluid weight conduction of 0.4%, the thermal conduction increase was 26%. For magnetic detection, except for silver/iron nano composite fluid, the nano particles of other three sets were paramagnetic, and all four sets were soft magnetic nano composite materials.

第二部分。将由较佳制备参数所产出的奈米复合流体，进行形貌外观、成分分析、表面电位及热传导性质实验与磁性检测；在奈米颗粒的形貌部分，经实验发现Ag、Cu、Fe、Ni等未氧化的颗粒皆呈现近似圆形，而若与水中的氧结合形成氧化物，奈米颗粒则会朝特定方向成长，在铜/铁奈米复合流体中FeO为四方体结构、Cu2O的颗粒是针叶状，在银/铁奈米复合流体中FeO则为多边形结构；而介面电位检测方面，结果显示经本制程所产出的奈米复合流体除银/铁奈米复合流体这一组较容易聚集沉淀外，其他三组中银/钴奈米复合流体的pH值为7，表面电位为21.21mV，银/镍奈米复合流体的pH值6.5表面电位为21.04mV而铜/铁奈米复合流体的pH值为7时表面电位约在-30mV，且此三组流体颗粒皆能维持悬浮性2周以上，悬浮性较佳；热传导实验部分，四组奈米复合流体中以银/镍奈米复合流体在增进热传上效果最佳，在温度30℃及流体重量浓度0.4﹪条件下热传导系数增进达26﹪；磁检测方面，除了银/铁奈米复合流体外，其他三组奈米颗粒皆属顺磁性，且这四组奈米复合材料都是属软磁性。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。