壁的
- 与 壁的 相关的网络例句 [注:此内容来源于网络,仅供参考]
-
According to the experimental data, it is found that the circumferential diffierence of heat transfer characteristics occurres due to the effects of thermal acceleration and buoyance in the inclined smooth tube at supercritical pressure.
实验结果表明:在超临界压力区域,倾斜光管内可能由于受到热加速度和浮力的综合作用,倾斜光管传热特性沿周向是不均匀分布状态,通常管内顶部的壁面温度比底部高,在大比热区发生传热恶化和传热强化的现象,低质量流速和高热负荷条件下会发生传热恶化现象,高质量流速下会发生传热强化,避免壁温发生飞升;内螺纹管内的传热特性在不同焓值区域表现不同,在远离拟临界焓值的低焓值区域和高焓值区域,呈现出相似的规律,而在接近拟临界焓值区域时,传热得到强化。
-
By using grand canonical ensemble Monte Carlo method, machanism for the adsorption of methane in single wall carbon nanotubes at 74.05 K has been investigated. It is found that the adsorption of methane in smaller SWNTs, whose diameters are 1.22nm and 1.632nm, exhibits "pore filling" behavior. In contrast, for the SWNTs of diameter larger than 2.04nm, capillary condesation takes place.
采用巨正则系统MonteCarlo方法研究了甲烷在单壁碳纳米管(Singlewallcarbonnanotube,SWNT)中于低温74.05K下的吸附等温线及吸附机理,发现在两个较小的孔径(1.225nm和1.632nm)下单壁碳纳米管中甲烷的吸附有着明显的微孔所独有的"填充效应",而在2.04nm以上的孔的吸附中会出现毛细凝聚现象。
-
The main contents include ? the foundation of MD simulation cell in Grand Canonical Ensemble;? the establishment of elastic collision mechanism between hydrogen molecules and carbon nanotube walls and arithmetic design;? molecular dynamics simulation details of hydrogen physisorption in single walled carbon nanotube arrays and program design;? the acquirement and analysis of computer simulation results, where the influences of tube diameter, distance between tubes, temperature and pressure on hydrogen physisorption in SWCNTA are investigated in detail.
主要内容为:①巨正则系综分子动力学模拟元胞的创建;②氢分子与碳纳米管壁弹性碰撞机制的建立及算法设计;③碳纳米管阵列物理吸附储氢的分子动力学模拟细节及程序设计;④计算机模拟研究结果的获取与分析,重点研究了管径、管间距、温度和压强对单壁碳纳米管阵列物理吸附储氢的影响。
-
The central angle of the impingement fluid separated from the target surface became larger with the increase of jet Reynolds. And the separating angle also increased with the increasing ratio of the jet distance to the diameter of the jet hole, while the range of induced vortex became smaller.
试验中发现随着冲击雷诺数的增加,冲击气流与壁面分离处对应的圆心角增大,分离推迟;随着相对冲击间距值的增加,气流与壁面分离处对应的圆心角越来越大,相对于受限空间的大小,诱导涡的范围越来越小。
-
Such observation resulted from the special shape of the conical column, in which the composition of forces near the conical column wall was different from that near the cylindrical column wall owing to the existence of the inclined plane.
这是由台锥形柱特殊的结构造成的。由于台锥形柱斜面的存在使流体在管壁区的受力情况不同于圆柱的管壁区
-
Such observation resulted from the special shape of the conical column, in which the composition of forces near the conical column wall was different from that near the cylindrical column wall owing to the existence of the incline d plane.
这是由台锥形柱特殊的结构造成的。由于台锥形柱斜面的存在使流体在管壁区的受力情况不同于圆柱的管壁区
-
It was shown that 1%Eu-PZT films have the highest Rayleigh constant, which indicates the minimal interaction of defect-domain walls and high contributions to dielectric and polarization. The high mobility of domain walls, combined with the obvious improved crystallization of 1%Eu-PZT results in the increase of dielectric constant and remanent polarization.
结果表明,1%Eu-PZT薄膜的瑞利系数最大,缺陷与畴壁之间的相互作用最小,畴壁运动对介电常数和极化强度的贡献最大,加之薄膜明显改善的结晶特性,使1%Eu-PZT呈现较高的介电常数和剩余极化强度。
-
The establishment of elastic collision mechanism between hydrogen molecules and carbon nanotube walls and arithmetic design;? molecular dynamics simulation details of hydrogen physisorption in single walled carbon nanotube arrays and program design;? the acquirement and analysis of computer simulation results, where the influences of tube diameter, distance between tubes, temperature and pressure on hydrogen physisorption in SWCNTA are investigated in detail.
主要内容为:①巨正则系综分子动力学模拟元胞的创建;②氢分子与碳纳米管壁弹性碰撞机制的建立及算法设计;③碳纳米管阵列物理吸附储氢的分子动力学模拟细节及程序设计;④计算机模拟研究结果的获取与分析,重点研究了管径、管间距、温度和压强对单壁碳纳米管阵列物理吸附储氢的影响。
-
In the grave of 244 unearthed a of jade, including 71 jade wall and two pieces of sapphire round dancers, l pieces of cloud volume relief carving stimulation cup, and its horns, silk screen and jade dragon grain weight YuDaiGou body, loop, carrying the wek-jin wall, the elegant unsurpassed, it reflects the processing jade superb technology level, visible NaYueGuo has mastered the open, modelling, drilling, cut system, polishing, enchase craft gimmick and restructuring, etc.
墓中出土的244件的玉器,其中包括71件玉壁以及两件青玉圆雕舞女、l件浮雕卷云纹的青白玉雕角杯,还有丝镂玉衣、龙虎并体玉带钩,龙凤纹重环玉佩、兽首衔壁,均可谓精美绝伦的珍品,反映了当时加工玉石的高超工艺水平,可见南越国已掌握了开料、造型、钻孔、琢制、抛光、改制等手法以及镶嵌工艺。
-
SEM result showed that the sample had uniform phase distribution and smooth surface at dried state as well as interpenetrate network structure at hydrogel state. It was seen from the swell ing behavior curves that groups T1, T2 and T3 swelled rapidly within 10-30 minutes, and formed elastic composite hydrogel pipes. In addition, the expanding ratio of inner and outer diameter of the tube was 20%-30% and 100%-120% with swell ing, respectively. The equil ibrium water content of the hydrogel pipes increased with increase of collagen composition. Three groups of samples were immerged in PBS solution contained 2 mg/mL lysozyme at 37 for 1 month, their nozzle cracked, their wall became thin and more transparent. And also, there was small floc deposited on the tube surface.
扫描电镜观察到液氮脆断的人工泪小管内部成分分布均匀,内外壁表面平整,冷冻干燥的人工泪小管断口呈凝胶态的互穿网络结构。3 组不同成分的人工泪小管在PBS 溶液中浸泡30 min 后均快速吸水溶胀,外径扩大100%~ 120%,内径扩大20%~ 30%,并且随胶原含量增高,溶胀速度增快,平衡溶胀率增大。3 组人工泪小管在37℃含2 mg/mL 溶菌酶的PBS 液中浸泡1 个月后,表面有部分细小絮状物,管口开裂,管壁变薄,透明度增加。
- 推荐网络例句
-
Breath, muscle contraction of the buttocks; arch body, as far as possible to hold his head, right leg straight towards the ceiling (peg-leg knee in order to avoid muscle tension).
呼气,收缩臀部肌肉;拱起身体,尽量抬起头来,右腿伸直朝向天花板(膝微屈,以避免肌肉紧张)。
-
The cost of moving grain food products was unchanged from May, but year over year are up 8%.
粮食产品的运输费用与5月份相比没有变化,但却比去年同期高8%。
-
However, to get a true quote, you will need to provide detailed personal and financial information.
然而,要让一个真正的引用,你需要提供详细的个人和财务信息。