堆积

Compared with the graphite, the coefficients of friction of the RL-C/C are lower under the same load of about 0.08-0.12, and the increasing range of the volume losses are still lower than those of the graphite. Compared with the SL pyrocarbon material, the COF and the volume loss of the SL-C/C are about 0.02-0.05 and 0.2 mm^3, lower than those under the same load. The COFs of most RL-C/C and SL-C/C specimens remain stable or decrease slightly with time, while those of the graphite and pyrocarbon specimens increase. The thickness of the integrated friction film of the RL-C/C decreases with load, but the wear surface of the SL-C/C is rough. Tough the wear surface of the graphite is integrated, the serious abrasive wear make the debris move easily and accumulate on the edge of the wear trace to form a restacked morphology. On the wear surface of the pyrocarbon material, some loosed debris, circular worn holes and flake worn out pyrocarbon has been found.

结果表明：PAN炭纤维改善C/C复合材料的摩擦磨损行为；在实验载荷范围内，与高强度石墨材料相比，含RL炭C/C复合材料的摩擦因数降低0.08~0.12；体积磨损量增幅降低；与热解炭试样相比，具有SL炭C/C复合材料的摩擦因数降低0.02~0.05，体积磨损量低0.2立方公厘左右；随着时间的延长，大部分C/C复合材料的摩擦因数基本相对稳定或呈小幅下降，而石墨、热解炭块的摩擦因数均呈不同幅度的上升；具有RL炭的C/C复合材料摩擦表面膜厚度随载荷增加而降低，具有SL炭的C/C复合材料摩擦表面较粗糙；高强石墨能形成较完整致密的摩擦膜，但磨粒磨损严重，磨屑易在摩擦膜边缘形成层状堆积；热解炭块摩擦表面磨屑堆积松散，有较多的孔洞以及热解炭层整体剥落的形貌。

Compared with the graphite, the coefficients of friction of the RL-C/C are lower under the same load of about 0.080.12, and the increasing range of the volume losses are still lower than those of the graphite. Compared with the SL pyrocarbon material, the COF and the volume loss of the SL-C/C are about 0.020.05 and 0.2 mm3, lower than those under the same load. The COFs of most RL-C/C and SL-C/C specimens remain stable or decrease slightly with time, while those of the graphite and pyrocarbon specimens increase. The thickness of the integrated friction film of the RL-C/C decreases with load, but the wear surface of the SL-C/C is rough. Tough the wear surface of the graphite is integrated, the serious abrasive wear make the debris move easily and accumulate on the edge of the wear trace to form a restacked morphology. On the wear surface of the pyrocarbon material, some loosed debris, circular worn holes and flake worn out pyrocarbon has been found.

结果表明：PAN炭纤维改善C/C复合材料的摩擦磨损行为；在实验载荷范围内，与高强度石墨材料相比，含RL炭C/C复合材料的摩擦因数降低0.08~0.12；体积磨损量增幅降低；与热解炭试样相比，具有SL炭C/C复合材料的摩擦因数降低0.02~0.05，体积磨损量低0.2 mm3左右；随着时间的延长，大部分C/C复合材料的摩擦因数基本相对稳定或呈小幅下降，而石墨、热解炭块的摩擦因数均呈不同幅度的上升；具有RL炭的C/C复合材料摩擦表面膜厚度随载荷增加而降低，具有SL炭的C/C复合材料摩擦表面较粗糙；高强石墨能形成较完整致密的摩擦膜，但磨粒磨损严重，磨屑易在摩擦膜边缘形成层状堆积；热解炭块摩擦表面磨屑堆积松散，有较多的孔洞以及热解炭层整体剥落的形貌。

When tooth week the bag bag form after, alter to make piling up of food remnant, the tooth germ spot and tooth stone calculus etc., this kind of lately piles up the further breakage deeper tooth week film again, the result of thus continuous vicious cycle, eventually go to a tooth to support to organize all breakages for week almost exhausted, but make tooth difficult to escape to pull out of bad luck.

当牙周囊袋形成后，更易使食物残渣、牙菌斑和牙结石等的堆积，这种新的堆积又更进一步的破坏更深的牙周膜，如此不断的恶性循环的结果，终至牙周支持组织全部破坏殆尽，而使牙齿难逃拔除的恶运。

The image showed that the ratio of raw material of RPC and particle distribution accorded with maximum packing density theory, and the porosity of accumulation was the least. The DSC showed the reaction rate of RPC was very fast and main hydration process focused in shorter time; SEM and X-ray showed that structure of the harden body of RPC was much denser, which mainly composed of some abnormal flat grains that got maximum packing density, and hydration products were mostly composed of Ⅲ type C-SH gel and a small amount of Ca2 and no AFt crystal.

由图象分析可知，即C原材料的比例及颗粒度符合密实堆积原理，堆积物的孔隙率达到最小；差示扫描量热分析表明，RPC的水化反应速度很快，主要的水化过程集中在较短时间内；扫描电镜及X衍射试验表明，RPC硬化体的结构非常致密，主要由一些不规则状的扁平粒子紧密堆积在一起，水化产物主要是Ⅲ型C-S-H， Ca2晶体的量稀少且没有钙矶石。

Combined with the investigation of SEM and other methods of interface analysis, we found that in the impact fracture process, matrix deformation, fiber pull out, interface debonding between matrix and fiber, interface friction induced by debonding, new surface appearance and so on all can absorb impact energy.

此外，研究还发现G系列坯料即使烧结至1500℃，在熔剂的配入量达不到50%情况下无法烧结，这一试验结果能用颗粒体随机堆积气孔率和本文提出的聚合体颗粒堆积的分数维结构模型得到解释。

Consisting of the protracting graph of hydrogen-like atom"s angle distributing, computer simulation of the symmetry of molecular orbital and chemical reaction mechanism, showing the molecular point group and symmetry element, computer simulation of molecular vibration, Bravias"s crystal lattice and their transforming, extracting of plane periodic lattice, extracting of solid periodic lattice, close packing of isometrical pellet and the structure of simple mental substance, close packing of unequal pellet and crystal structure of representative ionic crystal, Computer Simulation of Phase Analysis by X-ray Diffraction.

内容包括类氢原子角度分布图的绘制，分子轨道对称性和反应机理的微机模拟，分子点群和对称元素显示，分子振动运动的微机模拟，布拉维晶格和晶格转化，平面点阵抽取，立体点阵抽取，等径网球的密堆积和金属单质结构，不等径圆球密堆积和典型离子晶体结构，X射线多晶衍射的微机模拟十个子模块。

The bucket kick the bucket like buckets in a well rain buckets rain pitchforks rain cats and dogs 118-build not built that way build down build in build into build in build on build upon build out build over build round build up 119-bull Irish bull n.

为基础；基于；依赖扩建；增建盖满建筑物用建筑物包围堆积以阻塞；逐步建立，逐步形成；堆积而成；累积，发展，增大；广告；宣传使成名；加强；增强；增进；赞扬；捧场；盖满房屋；发展为市区

All of particles complies with Gaussian distribution, meanwhile calculates particle numbers According to mass percentage, and selects parameter of particle and wall. The gradation of Bailey method about the maximum nominal particle diameter 16 mm is simulated by PFC2D, such as CA0.2, CA0.4, CA0.5, CA0.6, CA0.8. Determine moveability of asphalt mixture through rolling distance of accumulation particle it's when asphalt mixture is stable at the gravitation. Computer simulation result is identical to testing result.

首次采用PFC2D程序的线性接触刚度模型，选取颗粒和墙体参数，按设计质量的百分比换算成颗粒数量，按照高斯分布规律排列颗粒构成，对贝雷法设计的公称最大粒径为16mm的级配CA0.2、CA0.4、CA0.5、CA0.6、CA0.8进行堆积模拟，在重力作用下形成自然堆积，测定混合料基本稳定时的滚动距离来判断混合料的分离程度，得到结果与离析势能指数的测定结果完全一致。

It is found that orthorhombic Fe2C is more stable than hexagonal Fe2C by 0.16eV on the basis of the computed cohesive energies.

研究结果表明，两种晶型Fe2C的磁性质相似，但正交堆积的Fe2C比六方堆积的Fe2C更稳定。

Pompe's disease is a rare hereditary condition that causes an enzyme deficiency, which in turn leads to the buildup of glycogen, a stored form of sugar used for energy. The glycogen buildup causes progressive muscle weakness throughout the body, particularly in the heart, skeletal muscles, liver, and nervous system. In extreme cases, children can also die of heart failure.

庞贝氏症是一种遗传的罕见疾病，因为缺乏体内的酵素，导致肝醣无法分解堆积，因肝醣无法分解堆积造成心脏肥大、肌肉无力，肝脏和神经系统衰弱，在ㄧ些更极端的病例中，最后就因为心脏衰竭死亡。

The absorption and distribution of chromium were studied in ryeusing nutrient culture technique and pot experiment.

采用不同浓度K2CrO4(0，0.4，0.8和1.2 mmol/L)的Hoagland营养液处理黑麦幼苗，测定铬在黑麦体内的亚细胞分布、铬化学形态及不同部位的积累。

By analyzing theory foundation of mathematical morphology in the digital image processing, researching morphology arithmetic of the binary Image, discussing two basic forms for the least structure element: dilation and erosion.

通过分析数学形态学在图像中的理论基础，研究二值图像的形态分析算法，探讨最小结构元素的两种基本形态：膨胀和腐蚀；分析了数学形态学复杂算法的基本原理，把数学形态学的部分并行处理理念引入到家实际应用中。