基本曲线

Based on the non-linear system and in the light of the characteristics of piecewise linearization of the bumper performance curve in the calculation of train coupling s,the calculation formulas are re-deduced by use of the basic principles of Newmark-β method.

基于非线性系统，针对列车连挂计算中缓冲器特性曲线分段线性化的特点，利用Newmark-β方法的基本原理重新推导计算公式，改进了传统的Newmark-β方法，改善了算法的稳定性，减小了计算误差，使之适用于列车连挂的计算。

The great tour purchasing power is the drive power of promoting the region's tourism developmentln the regional space, scale economic and regional separation are one of the basic characteristics of promoting tourism industry, So we must arrange the regional tourism industry with a systematic method and give prominence to the central city. For its outstanding area in the regional space, central city has evident superiority in the regional ecnomic development, and has echelon between central city and its periphery scennic spots, which is the inducement mechanism of tourism industry's arranging, developing and advancing step by step. For the law of diminishing marginal utility and the theory of equilibrium, the max utility equilibrium of tourism consumption be at the point of tangency of undiscrepancy curve and the cost budget curve.

中心城市居民巨大的出游力是拉动其周边旅游地发展重要的内在驱动力；由于地缘关系，区域规模经济与地域分割并存，是旅游产业运动的一个基本特征，为此必须对区域旅游经济进行系统化布局，突出中心城市的产业中心性；因其区位条件独特，中心城市在区域经济发展中居于明显的优势，与周边城乡部位存在经济发展上的梯次性，这种梯次性是区域旅游生产力布局、产业发展梯次传动，最终整体联动的经济诱导机制；根据边际效用递减规律和旅游者最大效用均衡理论，旅游消费效用最大化的均衡在无差异曲线与开支预算线的切点(即旅游目的地选择的最佳位置)上，且随着边际效用递减，目的地选择的最佳位置向远离中心城市方向移动，这就是中心城市与周边旅游地互动关系的经济学解释。

In the second chapter, we introduce the definition of polar form, the three representations of it and how to represent Bezier curves and surfaces by polar form.

第二章主要介绍了Polar形式的一些基本知识，包括Polar形式的定义、计算方法以及如何用Polar来表示Bézier曲线曲面。

Firstly, the basic character of the remote filed eddy current is simulated and analyzed in case of two-dimension axial symmetry which approves the existence of remote filed eddy current phenomenon; the full circumferential defect model is investigated to approve the feasibility of using the RFEC techniques to detect the position and depth of defect; the pit corrosion、circumferential and axial crack models are simulated, and the defect character based on voltage plane polar plot and the changes of phase and amplitude are analyzed to supply the standard for defect reconfiguration.

首先，在二维轴对称情况下仿真与分析了远场涡流的基本特性，证实了远场涡流现象的存在；对全周向缺陷的远场涡流检测进行了详细研究，证实了远场涡流检测缺陷位置和深度的可行性；对点状腐蚀、轴向与周向裂纹三种非轴对称缺陷进行三维有限元仿真，利用相位差和幅值变化曲线与电压平面极坐标图对缺陷特征进行分析，为缺陷形状重构提供了依据。

The method of reading the line, arc, spine, tolerances, surface roughness and full messages of the part from DXF file generated by AutoCAD is mainly introduced. Based on the study of DXF, a program interface is developed, by which the data can be shared among different CAD systems. According to the different Characters, the respective tool paths are designed. And by a machine configure file, the General postposition process is deal with. On the research of thegeneral simulation technology that is based on the NC codes. By analyzing the characteristics of the CNC system and the NC codes, a set of general simulation interface is developed.

本文主要介绍如何从AutoCAD生成的DXF文件中读取直线、圆弧、样条曲线、尺寸公差、表面粗糙度等信息及零件的全局信息，结合回转体零件的特点，通过对应用广泛的DXF的深入分析，建立了与不同CAD系统实现数据共享的编程接口；根据零件的不同加工特征提出了相应的走刀路线，并通过机床配置文件，初步实现了通用后置处理；研究了数控系统和NC代码的特点，建立了仿真通用接口，并提出代码翻译地基本思路。

The established models in which annual precipitation was incorporated as the principal variable indicate a very closely correlation between forest productivity and its corresponding climatic factors,allowing to simulate distribution pattern of actual forest productivity effectiv...

结果表明：在所构建的模型中，除海拔高度与净生产力的相关模型外，其它模型均有较高的实用价值，模型的拟合曲线变化，基本反映了中国森林现实生产力的地理分布格局；中国森林生产力的分布格局主要取决于气候环境中的水热条件，水分条件是决定中国大部分地区森林生产力水平和地理分布格局的主导因素；根据7个GCMs大气环流模型预测合成的2030年的气候情景，研究气候变化对中国森林生产力影响的结果是：气候变化并没有改变中国森林第一性生产力的地理分布格局，即从东南向西北森林生产力递减趋势不变，但不同地域的森林生产力有不同程度的增加。

Some key part is ameliorated to meet the demands of working. This thesis mainly includes:(1) Analysing the working principle of the spring operateing mechanism, expatiating the character of the mechanism;(2) With the design aim of the spring operating mechanism, accomplishing the design of ZW□-12/630-20 outdoor HV vacuum breaker based on the systemic design theory of the spring operating mechanism, which includes spring mechanism of open-close switch; cam mechanism based on the principle of power balance; buckle-off mechanism with force-minished device; ratchet wheel mechanism with number-increased detent;(3) In the design on the spring operating mechanism for the outdoor vacuum breaker, using the air cushion device with speed controller to ensure the steady working of the spring operating mechanism;(4) Accoding the problem of daily maintenance for HV circuitbreaker, giving some effective steps of daily maintenance.

论文工作主要包括以下几个方面：(1)从真空断路器弹簧操动机构的功能原理出发，详细分析了该机构的工作原理，阐述了机构工作的基本特性；(2)根据工程实际提出了真空断路器弹簧操动机构的设计目标，在系统分析弹簧操动机构设计理论的基础上，完成了ZW□-12/630-20型户外真空断路器弹簧操动机构的设计工作，其中包括真空断路器弹簧操动机构的分合闸弹簧机构的设计；以输出力特性曲线设计机构理论演化出的功率平衡原则为基础的凸轮机构的设计；带有减力机构的滚动摩擦扣结方式的脱扣机构设计；根据实际情况增加了棘爪数量的棘轮机构设计；(3)在真空断路器弹簧操动机构的设计中，引入了速度控制模式空气缓冲器，对惯性负载起到了良好的自动缓冲效果，从而保证了真空断路器弹簧操动机构稳定、有效地运行，保证了真空断路器的动作质量；(4)针对目前真空断路器运行过程中存在的问题，提出了有效的日常维护措施。

However, one of Ching Ming Festival, and the overall curve rose slowly on the start, by the end of April to reach its peak early in May, when the main business city flights between the basic or higher in the tickets.

但清明节一过，整体曲线就开始缓慢上升，至4月底5月初达到峰值，届时主要商务城市之间的往返航班基本都在六折或更高。

In this paper, thereare four sections. In the first section, we introduce the basic theory. Inthe second section, we give out the recent main results of multivariateLagrange interpolation. In the third section, we get some theories ofno posed set of nodes from a kind of recursive method of constructingposed set of nodes for bivariate Lagrange interpolation, and we get akind of abnormal posed set of nodes for interpolation form the reversethought of that theory.

本文共分为四章，第一章介绍了有关多元插值的基本理论和方法，第二章讲述了有关多元Lagrange插值和多元切触插值的近期主要结果，第三章我们从有关适定结点组的添加曲线法考虑，得到了一些有关Lagrange插值不适定的结论，并从该结论的反方向思考，得到了一种非常规型插值适定结点组。

By analyzing phases velocity profiles and resistance lawv resulted from gas slug in the pipe center,the condition that the secondary flow occurs,phases velocity profiles,formula of drag reduction and a curve of drag reduction have been obtained.

以流体力学基本方程为基础，通过对气体在管道中心形成段塞流的相速度分布和阻力规律分析，得到了二次流发生的条件、各相流体速度分布、减阻率关系式以及减阻率曲线。

Do you know, i need you to come back

你知道吗，我需要你回来

Yang yinshu、Wang xiangsheng、Li decang,The first discovery of haemaphysalis conicinna.

1〕 杨银书，王祥生，李德昌。安徽省首次发现嗜群血蜱。