地方法

People are required to know and analyze the operating axes of rotary kiln in time in practice, in order to adjust and maintenance it in reason. So The Great Wall Aluminum Corporation of China bankrolled for studying the microcomputer real-time monitoring system of large-scale rotary kiln and commissioned Central South University to develop it.Based on analyzing and comparing the status quo of the monitoring system of rotary kiln, this paper brings forward a new method of monitoring the operating status of rotary kiln. It analyses the system-error and the configuration and demonstrate the feasibility in detail. In the design of hardware configuration it analyzes the principle and speciality of the tailor-made eddy current transducer and PCI-1713 analog input card and the multilevel supervisory network.

本论文首先在分析和比较同内外回转窑检测系统现状的基础上，首次提出了新的回转窑运行状态检测方法，并从系统误差及可行性角度进行了详细的分析和论证；其次，在监测系统硬件结构设计中，详细地分析了多级管理网络的实现，PCI-1713双缓冲区高速数据采集装置的原理、特点、工作过程，以及针对该系统恶劣的工作环境、特定性能要求而设计的特制电涡流传感器的原理、波形特性及性能特点，及为了减小非线性误差而采用计算机软件进行多段线性插补方法实现误差补偿；另外，在系统软件设计中，详细地分析了高速数据采样软件、智能信号处理软件、系统监测软件的实现，分析了采用模糊自适应滤波方法有效地滤除本系统恶劣环境下的各种干扰因素，并简要地介绍了系统分析软件的功能。

Firstly, this paper investigated roundly the basic theory of the ambient vibration method, analyzed systematically the main methods of ambient vibration identification, and discussed their advantages and disadvantages. Then we established the finite element model of structural dynamics and test model and analyzed their mutual relation, improved MUSIC method and correlation function method in the harmonic identification, and gave the subspace method and correlation function method based on continuous model, which is multi-harmonic retrieve technique. And then, this paper also puts forward least-squares method to estimate directly structural physical and modal parameters; this approach replaced the derivative operator in the continuous time model with an equivalent approximation, and estimated the physical parameters of structures by the least-squares method. And then, we discussed the approximation methods of derivative and their convergence. Finally, this paper researched the modal parameters of a frame structure by the simulation and test. The results demonstrated that subspace method, correlation function method and the least-squares method are effective and stable respectively.

全面地研究环境振动识别方法的基本理论，系统地分析环境振动识别方法的主要方法，讨论它们的优点和不足；建立结(来源：6666AB44C论文网www.abclunwen.com)构动力学的有限元模型和试验模型，分析有限元模型与试验模型之间的相互关系；改进谐波识别中的MUSIC识别方法和相关函数识别方法，给出大型结构模态识别的连续型的子空间分解识别方法和相关函数识别方法，这个方法是多元谐波识别方法；提出直接识别结构的物理参数和模态参数的最小二乘方法，这个方法利用导数的近似值代替导数值，并运用最小二乘方法识别结构的物理参数，讨论导数近似值的选择方法，分析算法的收敛性；通过仿真计算和模型实验，研究高层框架结构的模态参数识别，验证子空间分解识别方法、相关函数识别方法和最小二乘识别方法的有效性，算法的稳定性；从理论和试验两个方面分析和研究噪声对识别精度的影响，影响识别精度的因素，以及部分模态成分的模态参数不能够被识别的原因。

It solves the problem that the unitary contour presentation can not correctly extract face contour in a face image which suffers from scale, rotation etc. The definition of the internal and external energy function is provided. At the same time, the global matching algorithm and local matching algorithm is given. The experiment shows that this presentation and the accompanying matching algorithm can be used to extract the face contour very well. So the image segmentation can be implemented by using it.②By analyzing the recognition principle of PCA method, we can conclude that the face images coming from different surrounding consist of different face image space. This is the essential reason that makes the generality of PCA method worse. Also, we give a measurement means to measure the distance from different face image space, so we can analyze face image space more conveniently.③We also construct various scale models and rotation pose models to detect the scale and rotating angle of face image to be recognized. The experiment results show that the detecting precision is very high. So it is good for face image feature extraction and face image representation.④Similarly, we construct local feature models of face image and utilize them to detect the local feature of face image. At the same time, we put forward a novel face image local feature detection algorithm, locating step by step. The experiment results show that this method can accurately detect the location of local face feature in a image.⑤A novel face image presentation model, dual attribute graph , is put forward. Firstly, it utilizes attribute graph to present the face image, then exact the local principal component coefficient and Gabor transform coefficient of thc pixels which corresponds to the nodes of the graph as the attribute of the nodes. This representation fully makes use of the statistical characteristic of the local face feature and utilizes Gabor transform to present the topographical structure of face image. So DAG has more general property.⑥Based on the DAG presentation, we give a DAG matching function and matching algorithm. During the design of the function and algorithm, the noise factor, e. g., lighting, scale and rotation pose are considered and tried to be eliminated. So the algorithm can give more general property.⑦A general face image recognition system is implemented. The experiment show the system can get better recognition performance under the noise surrounding of lighting, scale and rotation pose.

本文在上述研究的基础上，取得了如下主要研究成果：①构造了一个通用的人脸轮廓模型表示，解决了由于人脸图象尺度、旋转等因素而使得仅用单一轮廓表示无法正确提取人脸轮廓的问题，并给出了模型内、外能函数的定义，同时给出了模型的全局与局部匹配算法，实验表明，使用这种表示形式以及匹配算法，能够较好地提取人脸图象的轮廓，可实际用于人脸图象的分割；②深入分析了PCA方法的识别机制，得出不同成象条件下的人脸图象构成不同的人脸图象空间的结论，同时指出这也是造成PCA方法通用性较差的本质原因，并给出了不同人脸空间距离的一种度量方法，使用该度量方法能够直观地对人脸图象空间进行分析；③构造了各种尺度模板、旋转姿势模板以用于探测待识人脸图象的尺度、旋转角度，实验结果表明，探测精确度很高，从而有利于人脸图象特征提取，以及图象的有效表示；④构造了人脸图象的各局部特征模板，用于人脸图象局部特征的探测；同时提出了一种新的人脸图象局部特征探测法---逐步求精定位法，实验结果表明，使用这种方法能够精确地得到人脸图象各局部特征的位置；⑤提出了一种新的人脸图象表示法---双属性图表示法；利用属性图来表示人脸图象，并提取图节点对应图象位置的局部主成分特征系数以及Gabor变换系数作为图节点的属性，这种表示方法充分利用了人脸图象的局部特征的统计特性，并且使用Gabor变换来反映人脸图象的拓扑结构，从而使得双属性图表示法具有较强的通用性；⑥在双属性图表示的基础上，给出双属性图匹配函数及匹配算法，在函数及算法设计过程中，考虑并解决了光照、尺度、旋转姿势变化等因素对人脸图象识别的影响，使得匹配算法具有较强的通用性；⑦设计并实现了一个通用的人脸图象识别系统，实验结果表明，该系统在图象光照、尺度、旋转姿势情况下，得到了较好的识别效果。

The main research work and its results are: 1Empirical results are analysed for the relations of fault displacement and earthquake magnitude, and difference between permanent ground deformation and maxium dynamic relative displacement on the two sides of fault; 2An analytic method is proposed for resopnse of a buried pipeline due to earthquake fault movement; 3A new shell model with an equivalent boundary and relted finite element analysis method are proposed for estimating response of a buried pipeline under large fault movement; 4By the proposed method, damage performance of water supply steel pipelines with large diameter is simulated to the real cases in Kocaeli Earthquake and Ji-Ji Earthquake, and simulating results show the real failure mode of pipes is revealed; 5Effects of overlying soil and soft/hard interlayers are analyzed on ground rupture mode and degree due to earthquake fault, and some earthquake rupture phenomena in soil layers are theoretically described for the first time; 6Pipeline response characters are discussed for the case of considering effects of soil layers on ground rupture mode; 7Research results and proposed method are applied in seismic analysis of pipline acrossing fault in the Gas Tansportation Project from West to East in China.

主要工作和成果包括：1）分析了不同断层位错形式下地表破裂位错量与震级之间的经验关系，并基于集集地震近断层记录分析了断层两侧永久地面变形和地震动相对位移幅值之间的差别，为合理地考虑地震断层位错地面变形动态影响提供了依据；2）发展了断层位错地面大变形下管线反应分析模型并给出物理概念明确、简单实用的解析分析方法；3）建立了断层位错下埋地管线反应分析的等效边界壳模型有限元方法，方法中引入了以非线性弹簧形式模拟离断层较远处管段影响的等效边界，简化了计算模型并突出了近断层处管体反应；4）利用等效边界壳模型方法，对土耳其地震和集集地震中大口径埋地管线震害进行了模拟，结果表明所提方法可以更清地解释震害所表现的管体破坏特征；5）研究了覆盖土层和软硬夹层的存在对断层位错地面破裂形式和程度的影响，首次从理论上解释了某些地震地表破裂现象；6）探讨了考虑土层对断层位错地面变形影响的管体反应特征；7）本项目成果已在西气东输工程的管道跨断层抗震问题分析中得到了应用。

For the first time we synthesized nanoscale metal hydrides of lanthanum, neodymium, samarium, dysprosium, and ytterbium with high efficiency under mild condition by complexometric catalysis instead of traditional preparation at high temperature and high pressure. It is for the first time that we synthesized lanthanide organic compounds with catalysts or initiating agents at atmosphere and ambient temperature,and some of them are new compounds. Nanometric lanthanide metal powders are prepared by thermal decomposition of the compounds in vacuum. Differently from the traditional method, size of the products prepared by our method is less than 40nm, and the activity of the reaction is very high. They are pyrophoric at atmosphere. They can make some reactions without activity or low activity show extremely high activity .We investigated influent regulations of methods, conditions to scale and special surface.

我们首次成功地用络合催化等方法取代需在高温高压下进行的传统方法，在温和条件下高效率地合成出纳米尺寸镧、钕、钐、镝、镱的金属氢化物；首次在常压常温的条件下，通过催化、引发等方法合成镧系金属有机化合物，再将其真空热分解成功地制备了纳米尺寸的镧、钕、钐、镝、镱等金属粉末；与传统方法不同，这些方法得到的产品基本颗粒尺寸小于 40 nm，遇到空气燃烧，具有极高的化学反应活性，使原来活性很低甚至观察不到活性的反应大幅度提高反应速率和产率；考察了制备方法、制备条件等因素对晶粒尺寸、比表面积大小等的影响规律。

Due to the complexity of the cell jitter, the NonSynchronous Tining Recovery methods are currently not mature With the emphasis being given to the Class A CBR traffic, this paper analyzes the performance of the queueing delay and cell jitter at the source node and intermediate nodes, and discusses the Source Timing Recovery at the destination node in ATM networks Firstly, this paper presents a description of the cell jitter of CBR traffic, and gives the definitions of two kinds of cell jitter regarding the Source Timing Recovery for CBR traffic Then, by using exact mathematical models and analysis methods, this paper analyzes the impact of the factors, such as the capacity of the queueing buffer, the randomness, the deterministic nature and the correlation in cell arrivals of the background traffic sources, on the queueing delay and cell jitter performance of the CBR traffic through Statistical Multiplexitng To obtain an insight into the power spectral distribution and look for better schemes for the depression and filtering of the cell jitter, within the analyses we succeed deriving the power spectrum of the cell jitter for CBR traffic Hence, not only the power spectral distribution of the cell jitter can in the frequency domain be qualitatively understood, but also can the rms (root-meansquare) value of the cell jitter be quantitatively obtained so as to more accurately measure the amplitude of the jitter In the end-to-end performance analysis of the queueing delay and cell jitter, we propose a kind of quasi-periodic cell stream model to characterize the jittered CBR traffic, and present an initial queueing analysis of the CBR traffic following such a model at a generic intermediate node Additionally, we briefly discuss the buildout/playout and Source Timing Recovery functions of the destination node Finally, regarding the Source Timing Recovery of CBR traffic, this paper systematically discusses several important principles of the cell jitter filtering and depression reported in the literature, introduces several implementation schemes of the Source Timing Recovery e.

由于信元抖动的复杂性，非同步定时恢复方法目前还很不成熟。本文针对A类CBR业务流在ATM网络源节点和中间节点的排队时延和信元抖动性能，以及在目的节点的源定时恢复问题作了较为全面的研究。首先，文中描述了CBR业务流的信元抖动，并具体地给出了两种与CBR业务源定时恢复有关的信元抖动的定义。然后，采用了精确的数学模型和分析方法，有针对性地分析了业务背景中信元到达的纯随机性、确定性和相关性以及排队缓存器容量等因素对CBR业务流经过统计复用后的排队时延和信元抖动性能的影响。为了了解信元抖动的功率频谱分布和寻求更好的抑制和滤除抖动的方法，在性能分析中，我们成功地完成了CBR业务流信元抖动的功率谱分析，使得不但可以从频域定性地认识信元抖动的能量分布特性，而且还可以定量地求出信元抖动的均方根值(rms：root-mean-square)，以更为准确地衡量抖动的大小。在CBR业务流的多节点端-端排队时延和信元抖动性能分析中，我们提出了一种准周期性(quasi-periodic)信元流模型来描述感染了信元抖动的CBR业务流，并基于这一模型进行了CBR业务流中间节点的初步排队分析。

With the support of a major research grant of Zhejiang Province (No. 001101027) and the Plan of Promoting Education of Excellence of Zhejiang University in the 21st Century, this dissertation is devoted to address the above problems and fabricate an L-band EDFA with low cost, high performance and technological innovation.First the mechanism of an erbium doped fiber amplifier is introduced. Various theoretical models based on classical rate propagation equations are summarized and compared for their applications. We use a modified numerical model based on the Giles model, which agrees with the experimental results well. This serves as the theoretical base for the whole thesis and will be used to optimize the characteristics of EDFAs. A novel method based on a map of noise figure and gain is proposed to analyze efficiently the dependence of the noise figure and gain for EDFAs on the EDF length and the pump power. The characteristics of various EDFAs are studied and compared.Secondly, some important parameters are introduced to describe the characteristics of EDFAs. The methods and the experimental setups for measuring the gain and noise figure of an EDFA are emphasized. We introduce how to measure the characteristics of each component of an EDFA, especially the gain and absorption coefficient of an erbium doped fiber.Thirdly, four types of simple and novel L-band EDFA structures with low noise, high gain and low gain ripple are proposed to satisfy the requirement of a DWDM system. They can be classified into two categories. In the first category, a single ASE pumping is served asa secondary pump. This category includes the following three types. Type: a new construction using a fiber Bragg grating in an unpumped EDF section at the input side. Type: a new structure of L-Band EDFA with two-stage pumps, which utilizes the forward ASE as a second pump.

本论文本着科技创新、服务于生产实践的精神，以设计价格低廉，性能优越、结构合理简单的L-band EDFA为目标，依托浙江省科技厅重大科学基金资助项目(001101027)和浙江大学振兴教育计划资助的全光网络的搭建—《光通信技术》课程实验建设项目，展开了如下工作：首先，介绍了掺铒光纤放大器的工作原理，归纳总结了基于速率方程基础的EDFA的各种理论模型，分析比较了各个模型的特点和适用场合，最终选择完善的Giles理论模型作为本论文分析设计EDFA的理论基础；针对实际实验条件提出了修正的EDFA模型的数值计算方法；创新地提出了增益—噪声系数全局分析法，直观有效地分析了EDFA的增益和噪声系数与掺铒光纤长度和泵浦功率的依赖关系，并对各种EDFA的性能作了全面的比较；第二，介绍了掺铒光纤放大器特性参数的定义与测量方法，重点介绍了噪声系数和增益系数的测量方法及实验装置；介绍了组成掺铒光纤放大器各组件的特性测量方法，重点介绍了测量掺铒光纤参数的方法和实验装置；第三，针对WDM系统对L-band EDFA谱平坦、低噪声、高增益的要求，我们创新地提出了四种不同的L-band EDFA结构，按设计思路可以分为两大类：一类是基于单抽运二级泵浦法，这一类包括在未泵浦掺铒光纤的输入端插入一根布拉格光纤光栅的两段L-band的EDFA的新结构；基于前向ASE光作为二级泵浦源推动下一级EDF工作的泵浦分配、两段级联L-band的EDFA的新结构；基于单根光纤光栅、泵浦分配、两段级联的EDFA；另一类则是基于同时应用前后向C-band ASE作二级泵浦源的双抽运法，如基于前后向ASE光作为二级泵浦源的三段级联L-band的EDFA的新结构。

Urban Remnant Natural Area is left behind in the urban planning area along with urbanization. Its landscape assessment is significant for urban natural preservation. On the basis of URNA's characteristics and in line of the domestic actual situation, psychophysical method, one of the most scientific and credible methods, is chosen to establish the complete landscape assessment system, including acquiring scenic beauty value by SBE method, dividing into different influencing factors by SD method, and setting up their connection model by multiple linear regression analysis. This method is also revised during the application process.

城市自然遗留地是随着城市化的进程在城市规划区内遗留下来的用地，根据城市自然遗留地城市性、自然性和遗留性的特点，结合国内的实际情况，运用目前最严格、可靠性最好的心理物理学方法，以相片为测试材料，采用SBE法获得美景度量值，SD法测定各景观要素量值，以及多元线性回归方法建立2者的关系模型，最终提出了城市自然遗留地景观美学评价完整的方法体系，并修正和完善了心理物理学方法在城市自然遗留地领域的具体应用。

On the basis of URNA's characteristics, psychophysical method, one of the most scientific and credible methods, is chosen to establish the complete landscape assessment system, including acquiring scenic beauty value by SBE method, dividing into different influencing factors by SD method, and setting up their connection model by multiple linear regression analysis.

城市自然遗留地是随着城市化的进程在城市规划区内遗留下来的的用地，根据城市自然遗留地城市性、自然性和遗留性的特点，结合国内的实际情况，运用目前最严格、可靠性最好的心理物理学方法，以相片为测试材料，采用SBE法获得美景度量值，SD法测定各景观要素量值，以及多元线性回归方法建立两者的关系模型，最终提出了城市自然遗留地景观美学评价完整的方法体系，并修正和完善了心理物理学方法在城市自然遗留地领域的具体应用。

In this paper Ⅰ successfully applied these methods to fault diagnosis, and presenting some new innovative machinery fault diagnosis method; First Ⅰ present a new gear wornout fault diagnosis method, this method use the vibration signal's time-frequency attribute and instantaneous phase undulation to accurately detect gear's fault, and by comparing with the traditional frequency domain analysis method, this method reveals that many nonlinear and nonstationary characteristic exist in gear's vibration, this tell us that if we use frequency domain analysis method without pay attention to the signal's characteristic, we could get wrong diagnostic result; Then Ⅰ present a new bearing fault diagnosis method, this method use ATVFD and Hilbert transform to do envelop demodulation,Ⅰ analyze the envelop with time-frequency method and find out that this method is more accurate then traditional method.Ⅰ also explain that the modulation of the fault to the carrier wave may also be non-stationary and nonlinear; Finally Ⅰ present a cylinder pressure measurement method of diesel engine by means of vibration, cylinder pressure is an important parameter of diesel engine fault diagnosis, the pressure measuring is simplified a lot by this method,Ⅰ also use the ATVFD and time-frequency analysis to realize it.

本文中将上述理论方法成功地应用到故障诊断中去，提出了几点创新性的诊断方法；提出了一种齿轮磨损故障诊断的新方法，该方法利用振动信号能量的时频域分布特征与瞬时相位波动特征可以进行精确的齿轮故障诊断，并通过与传统的频域诊断方法的比较，揭示出齿轮振动中存在的明显的非线性与非平稳特征，说明了不加选择地利用频域分析方法进行齿轮故障诊断很可能会得到错误的诊断结果；提出了一种轴承故障诊断的新方法，该方法利用ATVFD分解与Hilbert变换进行包络解调，并对解调得到的包络信号进行时频域分析，可以实现更加准确轴承故障诊断，说明了故障对载波信号的调制往往也是非平稳与非线性的；提出了一种利用振动信号进行柴油机汽缸内压力检测的新方法，柴油机汽缸压力的变化是柴油机故障诊断的重要参数，利用振动方法可大大简化汽缸压力的检测过程，该方法也是综合利用ATVFD分解与时频域分析方法实现的。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。