在试验中

Furthermore, a plan of designing the small model having a step bottom is provided in the experiment of restricting model. And a plan of jetting from foreside and middle part of the large scale model is adopted in experiment, all these are our innovative points.

此外，在小比尺模型试验中，还提供了一种断阶喷气试验设计方案，在大比尺模型试验中，采用了首中部同时喷气的方法，这些都是本文试验的创新之处。

Chicken feed of model 661 is regarded as raw material of pellet feed, the influence that experimental factors including modulation-character temperature, modulation-character moisture, grease-additive quantity, and comminuting granularity have on making pellet quality, productivity, and electricity consumption. UG and ANSYS are regarded as simulating circumstance in finite element analysis, for problem on service life of the machine, evaluation index that average stress of a series of parameterized loop die is regarded as service life of hoop standard granulator is achieved by dynamic, static, and thermal structure coupling analysis for key part: loop die of the machine. For every influencing factor the experimental arrangement of array and combination is made by adopting optimizing idea and method of experimental design, the aim of quantification analysis is strived to arrive.

在试验设计中，采用正交试验的方法，以611型鸡饲料作为颗粒饲料的原料，分析混合饲料的调质温度、调质水分、油脂添加量、粉碎粒度等试验因素对制粒质量、生产率、电耗的影响；有限元分析中以UG、ANSYS作为仿真环境，针对制粒机使用寿命的问题，通过对环模制粒机中的关键零件环模进行动力、静力、热结构耦合分析，获得一系列参数化后的环模的平均应力作为环模使用寿命的评价指标；以实验设计的优化思想和有限元分析方法对各个影响因素作了排列组合式的实验安排，力求达到量化分析的目的。

According to the characteristics of the fuse industry and the research condition, We applied ZPrinter310 system to produce the fuze prototypes and used these prototypes to help design in the project argumentation phase, got the final project;Then we applied AFS-320 rapid prototyping system to produce the noumenon, analyzed the noumenon's precision、surface quality and performance of material mechanics in detail,based on these analytic results,we considered to use the noumenon in the fuze local performance test and some laboratory experimentations;At last we discussed how to combine the rapid tooling and precision foundry to produce batch of samples, we can apply these samples in the fuze system and ball cartridge experimentation.

本论文将快速成型技术贯穿在引信研制周期中的各个阶段，根据引信研制的特点及现有的研究条件，应用基于3DP工艺的ZPrinter310系统制造出了引信零件原型，并将原型应用于方案设计论证阶段辅助引信设计，得出了零件的最终设计方案；应用基于SLS工艺的AFS-320快速成型系统制造出了引信本体，对本体的尺寸精度、表面质量及材料的力学性能作了详细的分析，根据综合分析结果，考虑将本体直接应用于引信研制阶段的局部性能试验及部分实验室试验中；最后还论述了如何结合快速模具及精密铸造技术小批量制造引信零件应用于引信研制阶段的实验室试验及实弹试验中。

The fertilizer test base on three aspect of grain size、growth velocities 、rate of the green parts, the result present that IBDU multiple fertilizer is bigger grain size and quirkier hydrolyze rapid and more short release period than UF multiple fertilizer, which work easier burning spot on grass leaf of Green lawn; on aspect of growth

肥料对比试验中，进行了颗粒大小、生长速度和绿叶率变化等三个指标的测试，结果指出IBDU技术肥料相对UF技术肥料在沙土环境中具有水解速度快，养分释放周期短等特点，并且大颗粒的IBDU技术肥料容易在水解过程中对果岭草坪产生灼烧性斑点，而对比试验使用的UF技术肥料由于粒径较小相对克服了此点不足；在生长速度和绿叶率变化方面，IBDU果岭均提前于UF果岭达到生长高峰和全绿率，也提前下降生长速率和绿叶比值，试验最终IBDU果岭的日生长量和绿叶率均明显低于UF果岭的数值。

On the other hand, the beneficial effects of the ACE or ARB drugs may be more reasonable and a better clinical judgment for combining therapy to achieve clinical protection as we have seen in AVOID, cardio-protection as we have seen in ALAY, and protection for heart failure as we have seen in ALOFT.

另一方面， ACEI或者ARB类药物的有益效应可能更合理，是更好的联合治疗的选择，从而获得我们在AVOID试验中所见到的临床保护作用、在ALAY试验中所见到的心脏保护作用、以及在ALOFT试验中所见到的心衰保护作用。

The expression of one-dimensional mathematical model of vertical migration of ammonia in the CRI system is:The parameters in the CRI model are determined as following: the retardarce coefficient is determined by static isothermal absorption experiment, the velocity of sewage travel through the soil column is determined by permeability test, the vertical dispersion coefficient is determined by test the electric conductivity of tracer in the dispersion experiment, the rate of nitrification and denitrification is determined by test of Baps technology.

依据单一氨氮、硝氮配水条件下的试验结果，引入多孔介质的溶质运移理论及对流-弥散方程，考虑NH4+-N在CRI系统中的运移受到对流和水动力弥散作用的影响，并吸附-解吸、硝化与反硝化3个过程，首次将配水流经CRI土柱的孔隙水流速方程与CRI土柱内发生的、以氧为约束条件的硝化、反硝化过程联系起来，建立了CRI系统一维垂向氨氮运移转化数学模型，表达式为：研究分别通过静态等温吸附实验率定了模型方程中的阻滞系数、通过渗滤试验测定了土柱中的孔隙水流速、通过测定弥散试验中示踪剂的电导率确定了纵向弥散系数、通过气压过程分离技术测定了土柱中的总硝化与反硝化反应速率常数，最后通过测定土柱沿程氧化-还原电位的方法分析氨氮在CRI系统中的运移转化机理。

Its rule of change was obtained. On the basis of other studies, the flocculation kinetics and flocs structure was studied. By making some assumptions, collision frequency were presented. Then the the flocculation kinetics model was established through population balance equation. Comparison of experimental data and modeling results indicate that there are the same trend between the two. So the model can predict flocs number and size during flocculation of Yellow River's loess particles without using empirical parameters. The TEM and SEM were used to obsever flocs in the study of floc structure. The flocculation was divided as flocculi, floc and floc aggregate. The flocs structure model was established by assumption that particles position in floc accords with tetrahedron. The fractal dimension of model and experimental flocs was found to be coincident. So the model can reflect the structure of flocs formed in flocculation of Yellow River's loess particles by macromolecule flocculant at a certain extent.

最后，本文还对絮凝动力学和絮体结构进行了研究，在前人研究的基础上，针对高分子絮凝黄河泥沙，对絮凝过程作了一些符合试验条件的假设，建立了颗粒碰撞频率表达式，应用了颗粒数量平衡方程，从而建立了絮凝过程的动力学生长模型，模型计算结果与试验数据对比表明，二者趋势一致，在没有使用经验参数的情况下基本上能够描述黄河泥沙絮凝过程中絮体数量和尺寸分布的变化过程；对絮体结构的研究中，应用扫描电子显微镜和透射电子显微镜对絮体进行了观察，将絮体分为絮粒、絮团和絮网三个不同的生长阶段，通过假设颗粒结合位置符合正四面体，建立了絮体结构模型，计算得到的模型絮体分形维数基本与试验中的实际絮体相符，在一定程度上能眵反映高分子絮凝黄河泥沙生成的絮体结构。

Its rule of change was obtained.On the basis of other studies,the flocculation kinetics and floes structure was studied. By making some assumptions, collision frequency were presented.Then the the flocculation kinetics model was established through population balance equation. Comparison of experimental data and modeling results indicate that there are the same trend between the two. So the model can predict floes number and size during flocculation of Yellow River's loess particles without using empirical parameters.The TEM and SEM were used to obsever floes in the study of floe structure.The flocculation was divided as flocculi,floc and floe aggregate.The floes structure model was established by assumption that particles position in floe accords with tetrahedron.The fractal dimension of model and experimental floes was found to be coincidentSo the model can reflect the structure of flocs formed in flocculation of Yellow River's loess particles by macromolecule flocculant at a certain extent

最后，本文还对絮凝动力学和絮体结构进行了研究，在前人研究的基础上，针对高分子絮凝黄河泥沙，对絮凝过程作了一些符合试验条件的假设，建立了颗粒碰撞频率表达式，应用了颗粒数量平衡方程，从而建立了絮凝过程的动力学生长模型，模型计算结果与试验数据对比表明，二者趋势一致，在没有使用经验参数的情况下基本上能够描述黄河泥沙絮凝过程中絮体数量和尺寸分布的变化过程；对絮体结构的研究中，应用扫描电子显微镜和透射电子显微镜对絮体进行了观察，将絮体分为絮粒、絮团和絮网三个不同的生长阶段，通过假设颗粒结合位置符西安建筑科技大学博士学位论文合正四面体，建立了絮体结构模型，计算得到的模型絮体分形维数基本与试验中的实际絮体相符，在一定程度上能够反映高分子絮凝黄河泥沙生成的絮体结构。

After carrying out Moderate Criterion Devise in the experiments of mathematical teaching, the author make amazing discovery that two classes with the same lever pre-experiment turn out to be no striking difference pro-experiment...

利用数学教育实验中的准试验设计，发现试验前同一水平的两班，在试验后有显著差异；试验前有差异的两个班，在试验后没有显著差异或差异度减小。

In this paper, test research have been performed on the two important mechanical properties indicator compressive modulus of elasticity and shear modulus. Numerical simulation has been performed on the base of results of test under the situation uniform and uneven thickness of elastomer layer, which analyze internal stress distribution of the elastomeric bearing, as follows:(1) The traditional test methods of compressive modulus of elasticity test are rather cumbersome and take up experimentalists lots of time. This paper has improved the traditional test methods of compressive modulus of elasticity test, which has collected the holding-load time together to concentrate on holding load. The tests have been performed on different types of bearings, which results show that the results of the improved test method conform to the error range regulated by the standard and can effectively save time for the experimentalists, also eliminate the accumulative error.

本文主要对板式橡胶支座的抗压弹性模量、抗剪弹性模量两个重要力学性能指标进行试验研究，并在试验结果的基础上对均匀胶层厚度和不均匀胶层厚度两种情况进行数值模拟，分析橡胶支座内部应力分布规律，具体内容如下：(1)传统抗压弹性模量试验方法比较繁琐，占用试验人员大量时间，本文对传统抗压弹性模量试验方法进行了改进，将持荷时间集中起来进行集中持荷，通过对不同类型支座进行试验，试验结果表明该改进试验方法所得结果符合标准规定误差范围，为试验人员节省了大量时间，并且还消除了传统方法中的累计误差。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。