固有振动

In the case of the small angular displacement, the natural frequency of the corresponding undamped linear system is obtained, which is consistent with the experimental observation.

通过讨论与小角位移无阻尼情形对应的线性无阻尼自由振动微分方程，得到了相应的固有频率，与实验结果一致。

This thesis first proposes the thought of designing the vibration body with anisotropic composite, develops a sample linear Ultrasonic Motor, and studies its actuating mechanism, resonant frequency, speed, and driving force theoretically and experimentally.

本文首次提出了利用各向异性复合材料作为振动体的设计思想，完成了相应的超声直线电机的样机研制，并对其致动机理、固有频率、速度、驱动力等作了深入理论和实验研究。

Then, carries on the vibration experiment with the different natural frequency and the optional frequency butt weld, enables its residual stress to obtain biggest reduction.

然后，用不同的固有频率及任选频率对焊接件进行振动实验，使其残余应力得到最大的降低。

In working, the tube via tube hoop is connected to the upper bottom plate (2); the lower bottom plate (3) is fixed to the groundsill; when the tube is vibrated, the distortion of spring can damp and adsorb the three-dimensional vibration of tube. The invention has lower natural frequency and wider temperature application, with simple structure and easy maintenance.

工作时，需减振的管道通过管箍与本发明所述的三维减振器的上底板(2)固接，三维减振器的下底板(3)与地基固接，当管道产生振动时，通过弹簧的变形来减小和吸收管道的三维振动，达到减振的目的，它具有较低的固有频率和较大的使用温度范围，具有结构简单可靠、安装方便、维护简便的优点。

In the third part of the paper, another novel technology, named as Mould Oscillation-less Electromagnetic Continuous Casting under AMMF was proposed in order to replace the huge mechanical mould oscillation system by AMMF imposing outside the mould in continuous casting.

进行了三种波形高频调幅磁场下的无结晶器振动电磁连铸初步实验研究，实验结果表明：在方波、三角波和正弦波调幅磁场作用下的无结晶器振动电磁连铸过程中，当调制波频率略低于系统固有频率时，弯月面与结晶器壁间断接触距离最大。

Secondly, the cutter of the machine was studied from reducing vibration, emphasis on knives array, homeostasis. To apply "ANSYS"method, At the same time, it was known that inherent frequency of the main axis was so far higher than vibratory frequency, and the machine main axis'rotational speed won't cause sympathetic vibration.

其次，本文从减少振动入手对9LRZ-80型秸秆揉切机的关键部件切碎器进行分析，着重对动刀片的排列、动平衡等进行分析研究，并通过有限元分析，得到切碎器主轴固有频率远远大于机器振动频率，机具的转速不会造成共振的危害。

The formulas for calculating natural frequency and vibration transmission ratio are given.

给出了钻柱轴向振动的固有频率和振动传输公式。

The control of an electromagnetic valve in the ABN brake chamber forces the spring to vibrate at a frequency of 18 times per second while braking, and also with certain natural frequency reciprocating motion.

利用停易ABN制动气室弹簧的振动及电控装置控制电磁阀激振，迫使气室弹簧在整个制动过程中不但以每秒18次的自振频率振动，同时又以一定的固有频率往复运动，利用弹簧的储能作用，将刹车时产生的声能和热能用弹簧的势能和动能来置换，从而达到降低制动噪声、温度和磨损的目的。

The result indicated that frequency of fish-shaped cable truss support system would decrease, resulting in increase of temperature.

算例表明，预应力鱼腹式索桁架支承体系固有频率随着温度的升高而减小，具有较强的非线性，其自振频率随着振幅发生变化，其非线性振动呈现&硬弹簧&特性，非线性自振频率高于线性振动频率。

The RV reducer,which is a planetary gear system with cycloidal gears in contact with pin type internal gear teeth and involute gear pair,has been widely used as reduction gears of industrial robots, By reason that robots are very strict with vibrations,a dynamic model of RV reducer is developed.

建立RV减速器的动力学模型并推导运动微分方程，通过求解振动方程得到系统的固有频率，并就针轮齿数对RV减速器振动的影响等进行了研究，得到对RV减速器的设计和应用具有指导意义的结论。

In the negative and interrogative forms, of course, this is identical to the non-emphatic forms.

。但是，在否定句或疑问句里，这种带有"do"的方法表达的效果却没有什么强调的意思。

Go down on one's knees;kneel down

屈膝跪下。。。下跪祈祷