吸水的

Transmission Electron Microscope and other properties testing results show that the complex emulsifier system is the crucial influence factor of the polymerization process and the properties of products. It may influence the coagulum content and reaction rate of the polymerization process, the performance, particle diameter,viscosity, electrolyte stability and storage stability of the emulsion products and the contact angle of the film.The initiator mainly influences the coagulum content and reaction rate.The acrylic monomers mainly influence the solid content, Minimum Film Formation Temperature of the emulsion and the Glass Transition Temperature of the film.The organic silicone monomer mainly influences the water absorption of the film.The reaction temperature mainly influences the reaction rate and conversion.The stirring intensity mainly influences the coagulum content of the polymerization process.

透射电镜等性能测试结果显示：复合乳化剂体系是硅丙共聚乳液的聚合过程及产品性能的主要影响因素，它可以对聚合过程的凝胶率、反应速率以及乳液的外观、粒径、粘度、耐电解质稳定性及贮存稳定性，还有乳液涂膜的接触角等造成不同程度的影响；引发剂主要影响反应速率和凝胶率；丙烯酸酯单体主要影响到乳液的固含量、最低成膜温度以及涂膜的玻璃化转变温度，有机硅单体主要影响涂膜的吸水率等；聚合反应温度主要影响乳液的反应速率和转化率等；搅拌强度主要是影响到聚合过程的凝胶率。

After relations between growth speed of final ice lens and segregation temperature were analyzed, the decrease of water intake speed at high segregation temperature was pointed. For small heave induced by intermissive freezing mode of controlling frost-depth, the mechanism of using intermissive phase to increase segregation temperature of the final ice lens so as to restrain its growth was proposed.

进一步定量考察末透镜体的生长速度与分凝温度之间的关系后，指出较高的分凝温度将会导致吸水速率的降低，而控制冻深的间歇冻结模式其机理就是利用间歇阶段促使末透镜体的分凝温度升高，抑制末透镜体的生长，进而达到减小冻胀的目的。

Analyses for binder phase distribution and percolative nature as well as effect of progressive substitution HAC byα-alumina on phase composition and distribution in alumina-substituted MDF composites and wet properties suggest that the contribution of the cross-linked PVA located in the interphase region to transport of moisture is limited.

通过加热MDF复合材料至不同温度点分析了其胶结相的分布和渗透特性以及掺加α—A1〓O〓对其相组成、分布和湿性能的影响，结果表明，界面相中交联PVA对湿度传递的贡献是非常有限的，而本体聚合物区域的PVA提供了湿度传递的主要途径，未反应水泥颗粒作为水的接受体，对MDF复合材料的湿抗折性能与吸湿也产生了严重的有害影响。

The principle of this kind of automatic ice thickness monitoring system is realized by detecting the vertical distance between the ice bottom and a fixed point in the water, which is measured by using a barrel moving from the fixed point to the ice bottom.

随浮桶一起运动的压差式水位传感器分别给出浮桶位于固定端和冰层底面的位置，而浮桶的运动则依靠数据采集仪控制浮桶内水泵排吸水改变浮桶的重力来实现，并且该仪器能够记录传感器的信号和设置水泵开关的开、闭时间。

The microstructures of composite membranes were studied by XRD and SEM. The thermal stabilities, methanol permeabilities and proton conductivities were investigated. Water uptakes and dimensional stabilities were also studied. The results indicate that amorphous zirconium phosphates are formed in the composite membrane, and have a good combination with the organic phase.

采用扫描电镜观察复合膜的断面形貌；采用热重分析仪研究复合膜的热稳定性；采用气相色谱测量并计算了复合膜的阻醇性；采用交流阻抗法测量复合膜的质子传导率；同时还研究复合膜的吸水率、尺寸稳定性。

And objective parameters (texturized degree, color, hardness, springiness, chewing, water absorption, yield, etc.) were investigated in the high moisture soy protein extrusion process, and the statistical models of system and objective parameters were built, using the step-by-step regression analysis; A comprehensive evaluation of the products, and the process optimization of high moisture extrusion were obtained,using factor analysis; Secondly, residence time distribution and soy isoflavones losses kinetics were studied in the high moisture extrusion; Finally, chemical bonding process, the micro-structure and protein secondary structure changes were investigated in the texturization of soy protein, then the mechanism assumptions of texturization soy protein by moisture extrusion were proposed.

本文对大豆蛋白高水分挤压组织化技术和机理进行了研究，研究内容包括：首先采用系统分析法，研究了大豆蛋白高水分挤压过程中，挤压机操作参数(螺杆转速、物料水分、喂料速度和机筒温度)对系统参数(系统压力、扭矩、单位机械能等)、目标参数(组织化度、色泽、硬度、弹性、咀嚼性、吸水率、产量等)的影响规律，建立了各因变参数的统计模型；采用因子分析法对产品进行了综合评价，并对高水分挤压组织化工艺进行了优化；其次，研究了大豆蛋白高水分挤压中的停留时间分布以及大豆异黄酮的损失动力学；最后，研究了大豆蛋白组织化过程中化学键、微观结构和蛋白质二级结构的变化规律，提出了大豆蛋白高水分挤压组织化的机理假设。

We might as well get a feel for the fringes and hollows in which life is lived, for the Amazon basin, which covers half a continent, and for the life that there, like anywhere else is always and necessarily lived in detail: on the tributaries, in the riverside villages, sucking this particular white-fleshed guava in this particular pattern of shade.

我们不妨去感受一下有生命其间的远方水乡山谷，去感受覆盖了半个大陆的亚马逊河流域，去感受那样一种生活-------在那里，一如在别的地方----那种必定总是琐碎的生活：在各条支流上，在临水的村落里，在有着独特形状的阴凉处吸着有白色浆果的独特的番石榴。

PTFE referred to F4, because of its excellent dielectric properties and corrosion-resistant chemical (high temperature of the molten fluoride elements and the state of alkali metal), non-absorbent, non-stick, not conductive, low coefficient of friction and not Ageing properties, and is widely used in chemical, petroleum, textile pharmaceutical, metallurgy, machinery, electronics, electrical appliances, electricity, food and aviation, military and scientific research in all walks of life, I plant the development of metal bellows, compensation , PTFE bellows F4 tetrafluoroethane compensator, F4 metal composite compensation, anti-corrosion steel liner tetrafluoroethane pipe, steel-lined tetrafluoroethane three links, elbow, Stone, the reaction tower, tower chloride, lining tetrafluoroethane valve Doors, tetrafluoroethane pads and steel-lined polypropylene pipes and accessories, and earnestly solve the user in the production process by the various anti-corrosion problems.

聚四氟乙烯简称F4，由于其优异的介电性能与耐化学腐蚀性(高温下的氟元素和熔融状态下的碱金属外)，不吸水、不粘、不导电、摩擦系数低及不老化等性能，而被广泛应用于化工、石油、轻纺制药、冶金、机械、电子、电器、电力、食品及航空、军用与科研等各行各业中，我厂开发的金属波纹管、补偿器，四氟波纹管F4四氟补偿器、F4金属复合补偿器，钢衬四氟防腐管件，钢衬四氟三通、弯头、四通、反应塔、氯化塔、衬四氟阀门，四氟垫片以及钢衬聚丙稀管道及配件，切实解决了用户在生产过程中所遇到的各种防腐问题。

These texture indexes and cooking quality indexes of rice were studied by correlation analysis.The results indicated that the correlations between the springiness length with swelling volume and starch iodine blue o...

研究结果表明：米饭的弹性与膨胀率、碘蓝值呈显著的正相关，粳米相关系数为0.853、0.774，籼米为0.827、0.816；黏度与吸水率呈显著的正相关，相关系数为粳米0.971、籼米0.824；黏着性与米汤干物质也有显著的相关性，粳米相关系数为0.788，籼米为0.829；回复能量、回复形变等指标与蒸煮品质指标间没有显著的相关性；可用硬度、黏度、黏着性、弹性来评价大米的食用品质。

In basic properties of silver grass, the basic biology construction, fiber morphology, buffering capacity , surface wet ability and longitudinal tensile strength was mainly studied; in manufacturing process of SPB, the effect of board density and UF addition on physical and mechanical properties of SPB was mainly discussed, and By means of test of orthogonal experimental design and searching test, the relationship between moisture content , hot-pressing temperature , water-proofing agent addition and the TS of SPB was studied in detail. Through the study of the test production process of SPB, the best technological conditions were determined.

在荻草基本性质方面，主要研究了荻草的基本生物构造、纤维形态、化学成分、酸碱缓冲容量以及荻草的表面润湿性和纵向抗拉强度；在荻草刨花板制造工艺方面，主要讨论了不同密度、施胶量与板材物理力学性能之间的关系，并通过正交试验的方法深入研究了热压温度、板坯含水率以及防水剂施胶量对荻草刨花板吸水厚度膨胀率的影响，通过研究确定了较佳的试验生产荻草刨花板的工艺条件。

It has been put forward that there exists single Ball point and double Ball points on the symmetrical connecting-rod curves of equilateral mechanisms.

从鲍尔点的形成原理出发，分析对称连杆曲线上鲍尔点的产生条件，提出等边机构的对称连杆曲线上有单鲍尔点和双鲍尔点。

The factory affiliated to the Group primarily manufactures multiple-purpose pincers, baking kits, knives, scissors, kitchenware, gardening tools and beauty care kits as well as other hardware tools, the annual production value of which reaches US$ 30 million dollars.

集团所属工厂主要生产多用钳、烤具、刀具、剪刀、厨具、花园工具、美容套等五金产品，年生产总值3000万美元，产品价廉物美、选料上乘、质量保证，深受国内外客户的青睐