吸入阀

According to the enterprise customer needs but also to provide special and complex oxygen inhaler, and various oxygen valve.

本企业还可根据客户需要，提供特殊的，复杂的氧气吸入器，及各种氧气减压阀。

As a result, by merely replacing the gasoline injector with natural gas injector, a large volume of natural gas is injected on the intake valve and then reflected, which makes the fuel concentration and pressure field in the intake manifold after the natural gas injection for the natural gas engine differ greatly from those for gasoline engine.

结果表明，若仅把MPI汽油机的喷油器用天然气喷射阀更换，大量的天然气喷到进气阀后反射，造成天然气发动机进气岐管内的燃料浓度场、压力场与MPI汽油机明显不同；并且进气阀被打开后，先期吸入气缸的天然气在纵向滚流的作用下被挤向进气阀底部下方，与后期吸入气缸的空气形成明显的分层充气构造。

Pump stop, they would first close the discharge stop valve, and switch to a complete halt until pump suction stop valve was closed.

泵停车时，应先关闭排出停止阀，并待泵完全停转后关闭吸入停止阀。

It doesn't matter not to mount the foot valve during the reloading of the pump, however, the control valve and the filter should be mounted on the suction pipeline to prevent the impurities from being sucked into the pump.

2楼泵的吸入和排出管道应有自己的支架，一般不允许泵体承受管路的重量，在泵处于倒罐工作时可以不装底阀，但应在吸入管路上装控制阀和过滤装置，以防杂物吸入泵内。

It doesn't matter not to mount the foot valve during the reloading of the pump, however, the control valvethe filter should be mounted on the suction pipeline to prevent the impurities from being sucked into the pump.

泵的吸入和排出管道应有自己的支架，一般不允许泵体承受管路的重量，在泵处于倒罐工作时可以不装底阀，但应在吸入管路上装控制阀和过滤装置，以防杂物吸入泵内。

It doesn't matter not to mount the foot valve during the reloading of the pump, however, the control valve and the filter should be mounted on the suction pipeline to prevent the impurities from being sucked into the pump.

在泵处于倒罐工作时可以不装底阀。但应在吸入管路上装控制阀和过滤装置。以防杂物吸入泵内。

Secure a shop rag under throttle valve opening to collect cleaner run-off, making sure rag will not be sucked into throttle body.

先确保节流阀底下的壶嘴打开至清洁器不会松脱的位置上，再确保壶嘴不被吸入到节流阀以内。

Secure a shop rag under throttle valve opening to collect cleaner run-off, making sure rag will not be sucked into throttle body.

摘掉空气导入器。先确保节流阀底下的壶嘴打开至清洁器不会松脱的位置上，再确保壶嘴不被吸入到节流阀以内。

Further, a vapor discharge opening and a vapor discharge valve mechanism are provided in that part of the pump channel which is between the air discharge opening and an inlet section of the pump channel. The vapor discharge valve mechanism is closed in the start of the pump, preventing negative pressure at a fuel suction opening from being reduced, and the mechanism is opened in the start of fuel pressurization, discharging fuel containing vapor to the outside of the pump channel.

另外，在上述空气排出口和泵流路的入口部之间的泵流路上设置蒸汽排出口，此外设置蒸汽排出阀机构，其在燃料泵启动时闭阀而防止燃料吸入口的负压降低，如果燃料加压开始则开阀，从而将含有蒸汽的燃料向泵流路的外部排出。

4Should be fully open before the start of the suction and discharge pipe valves,non-closing valve to start.

4启动前应全开吸入和排出管路中的电动截止阀，严禁闭阀启动。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。