各种工艺的

Applique. Also called paste embroidered. It use hand-cut into various shapes of various designs fabrics spell and Hand-sewn quilted. This process is work, a relatively expensive price

补花。也叫贴绣，使用手工剪成各种形状的面料拼成各种图案，再用手工缝在绗缝被上的一种工艺，这种工艺非常费工，相对价格也贵一些。

The influence of battery formula and technology parameter on the safety performance of mercury-free alkaline Zn/MnO2 button cell was explored. Short circuit test and overdischarge test were used to study the safety performance of battery produced with varied formula and technology parameter. The factors affecting the safety performance of battery were studied. The optimal technology parameters are confirmed as follows: capacity ratio of anode to cathode is 0.91, KOH electrolyte content is 43%, content of Zn22- dissolved in KOH electrolyte is 7%, content of ZnO added in zinc gel is 0.8%1.0%, content of electrolyte added in zinc gel is 40%42%, content of binder added in zinc gel is 1% and the mass ratio of polyacrylate sodium to polyacrylic acid is 64, content of inhibitor added in zinc gel is 0.01%.

摘 要：探讨电池配方和工艺参数对无汞扣式碱锰电池安全性能的影响，采用短路测试和过放电测试的方法研究各种工艺配方下电池的安全性能，通过实验研究了影响电池安全性能的各种因素，并确定最佳的工艺参数分别如下：负极与正极容量配比为0.91，KOH电解液浓度为43%，电解液中氧化锌的含量为7%，锌膏中的氧化锌用量为0.8%~1.0%，锌膏中电解液用量为锌粉量的40%~42%，锌膏中增稠剂用量为锌粉量的1%且其中聚丙烯酸钠与聚丙烯酸的质量比为64，锌膏中缓蚀剂用量为锌粉量的0.01%。

Lost foam process is one of the most advanced casting crafts, and it can be applied in different materials, sizes castings such as steel ,iron, aluminum castings.High-quality of casting with precise size and smooth-faced; no special requirement for material; reduced trimming work and mechanical processing; Fewer inner flaws, and more compact structure.Environmental-protecting. Working conditions could be improved greatly; at the same time reduced labor intensity and decreased energy consuming could also be achieved.

消失模铸造工艺充分汇集了实型、法铸造工艺的优点为一体适应于钢、铁、铝等各种牌号各种材质不同结构的大、中、小型各类铸件利用干砂固型复制原型原样铸件几何尺寸的精密度高无飞边、毛刺、冷隔均匀一致表面光洁度接近精密铸造铸件内部结构稳定排除了砂眼、气空、缩松等铸造缺陷该工艺充分利用了环保理念且投资少整个生产过程没有污染。

After comparison of various process, a optimum process—ANIS process can be drawn; A autotrophic denitrifying process is successfully started up and stable operated; ANIS nitrous nitrifying process and autotrophic denitrifying process are joining-up in series to operate, and sound nitrogen removal effect can be achieved.

本论文广泛研究了各类C/N均小于1、甚至低至0.5以下的低、中、高氨氮浓度废水进行亚硝化处理的效果，综合比较了各种不同的处理工艺，得出了最佳工艺——ANIS工艺和运行条件；成功启动并稳定运行了自养反亚硝化系统，并将ANIS亚硝化工艺和自养反亚硝化工艺串连运行，取得了良好的脱氮效果。

By simulation, the optimal operation conditions were gained in every step in the separation process, and polymerization-class isoprene was gained by the process. And to improve the economy of process, the process was studied by simulation, 99% cyclopentene and 1, 3-pentadiene were gained by continuous separation process. All were the base of the process industrialization.

通过模拟研究，得到分离各步的最佳塔高，进料位置和各种操作条件；并进行了全流程的模拟优化得到聚合级的异戊二烯的各种工艺参数；通过模拟研究对分离工艺进一步深化，得到了从C5中分离出环戊烯和间戊二烯的优化工艺条件，对工艺经济性进一步优化，给过程工业化提供了依据。

The technological advances of toluene disproportionation and transalkylation process,shape selective disproportionation of tolueneand dealkylation process of heavy aromatics, domestic and abroad, were reviewed.

综述了国内外芳烃联合装置中甲苯歧化与烷基转移工艺、甲苯择形歧化工艺和重芳烃脱烷基工艺近年来技术进展情况，并分析了各种技术的优势与不足之处。

The main contents are: Status and prospects of micro/nano fabrication technology, semiconductor substrates, vacuum science and plasmas. Several unit processes of microfabrication like diffusion, thermal oxidation, ion implantation, optical and nonoptical lithography, etching, physical deposition, chemical vapor deposition and epitaxial growth. Process integration of these unit processes for example CMOS technique and silicon bipolar technique, microelectro mechanical systems and some nano fabrication technologies will be introduced.

主要内容有：微米/纳米制造技术的现状和展望、半导体衬底、真空科学和等离子体，各种单项微电子加工工艺，如扩散、热氧化、离子注入、光学和非光学光刻、刻蚀、物理淀积、化学气相淀积、外延生长等，以及各种单项工艺的集成技术，如CMOS技术和硅双极型工艺技术，并初步介绍微电子机械系统和纳米加工技术。

The system of CAPP can not only make decision scientifically,According to the experience knowledge of technologist and the process data,but also help people design a proper process planning, furthermore,and also calculating the process dimension,protracting the fig of working procedure choosing the cutting parameter and the optimizing the result of designing of techniques automatically, as a result a better and high quality technical rules can be designed . it make it possible to integrate the CAD ,CAM MIS etc .

CAPP不但能利用工艺人员的经验知识和和各种工艺数据进行科学的决策、自动生成工艺规程，而且还能自动计算工序尺寸、绘制工序图、选择切削参数和对工艺设计结果进行优化等，从而设计出一致性良好的、高质量的工艺规程，也使工艺设计与CAD、CAM、乃至MIS等系统的集成成为可能。

Clothing company's long-term commitment to supporting the processing areas, and actively explore practice, the use of modern technology to solve the traditional process of new ideas in special embroidery, embroidered towels, chain embroidery, embroidered Pandai, winding embroidery, embroidered rope , Chu-embroidered, the whole horsepower palygorskite air embroidery, all kinds of water-soluble lace, wool embroidery, hand-embroidered imitation, ordinary embroidery and so on in the industry has always been a leader, 95 percent of products exported to Japan and Europe and the United States and other countries, in order to complete the implementation of quality assurance Policy, with the exception of the passed ISO9001-2000 international quality certification, all production lines are as far as possible, using sophisticated automated production equipment, so that the quality of products and production processes to be more comprehensive quality control, the company has the world's most advanced Japan Tajima embroidery machine-80, special embroidery machine 20, including 2-of-embroidered Taiwan, the introduction of Shuttle-2 Switzerland Taiwan, laser cutting machine six, and silk, and other machines, users can meet the various technology And production needs.

公司长期致力于服装配套加工领域，积极探索实践，运用现代工艺解决传统工艺的新思路在特种刺绣，毛巾绣，链条绣，盘带绣，卷绕绣，绳绣，珠片绣，整匹缕空绣，各种水溶花边，毛线绣，仿手工绣，普通绣花等方面在行业始终处于领先地位，产品 95%出口日本和欧美等国家，为了彻底落实品保政策，除已通过的 ISO9001-2000 的国际质量认证外，各生产线皆尽可能采用精密自动化生产仪器外，使制品质量和生产制程品质得以更全面的控制，公司拥有当今世界上最先进的日本田岛平绣机 80台，特种绣花机 20台，其中珠片绣机2台，引进瑞士飞梭机 2台，镭射切割机 6台，及对丝等机器，能满足用户的各种工艺和产量的需求。

Consequently, the permeability of cohesive zone in blast furnace can be improved and the total pressure drop in blast furnace can be decreased by use of such sinters. In order to ensure proper MgO content in the BF slag and improve the RDI of sinter, a new process of adding MgO in BF is proposed.MgO; sinter; blast furnace; cohesive zone

本文考察了MgO对烧结工艺及烧结矿冶金性能的影响，提出了合理添加MgO新工艺的建议。1 MgO对烧结工艺的影响1.1 烧结试验在实验室条件下，以各种铁精矿粉为原料，使用j6150 mm烧结杯系统，考察MgO含量对2种碱度(R=1.36和R=1.76)烧结工艺的影响，烧结试验中的MgO以白云石的形式添加，MgO的质量分数分别为1.3 、1.7％、2.1 、2.6 和3.0％，其他烧结工艺参数见表1.1.2 试验结果及。。。。。。

Do you know, i need you to come back

你知道吗，我需要你回来

Yang yinshu、Wang xiangsheng、Li decang,The first discovery of haemaphysalis conicinna.

1〕 杨银书，王祥生，李德昌。安徽省首次发现嗜群血蜱。