发泡的

But basically they are both carbonated drink, sweet and sour.

不过基本上都是微发泡的发酵饮料，酸酸甜甜的。

The Division specializes in rubber Foam manufacturers.

本司专业从事橡胶发泡的厂家。

The effective factors on the curing characteristics of silicone rubber foam prepared with the technology of removing temporary filler were investigated.

对采用溶析成孔技术发泡的甲基苯基乙烯基硅橡胶胶料的硫化特性影响因素进行了探讨。

This paper deals with the foaming of Linear Low Density polyethylene with filler.

本文介绍了用线型低密度聚乙烯进行填充发泡的试验结果。

Toluenesulfonyl chloride: Tosyl chloride is corrosive, vesicant, lachrymator

甲苯磺醚氯：对甲苯磺醚氯是有腐蚀性的，发泡的，催瓦斯，受潮的和

With azodicarbamide as blowing agent and nano-CaCO3 as nucleator, the cell morphologies of non-crosslinked and corsslinked polypropylene foams were studied. The effects of different contents of crosslinking agent on the flexural strength and non-notched impact strength of PP foamed compound were also studied.

以活性纳米碳酸钙为成核剂，偶氮二甲酰胶为发泡剂，研究了未交联和交联聚丙烯发泡的泡孔结构，同时还研究了不同的交联剂含量对聚丙烯发泡制品弯曲强度和无缺口冲击强度的影响。

It was found that increasing pressure for blank can improve the compactedness of blanks so as to make foam aluminium materials with homogeneous pores. Foaming temperature, as one of the main influencing factors on foaming process, should be controlled higher than the melting point of Al or Alalloy to a certain extant in order to keep a reasonable viscosity. Thus, the foam aluminum with homogeneous pores and high porosity is available. As shown by experiments, such materials should be made on conditions that they shall be protected with molten salt under 300?MPa pressure at 675～680?℃.

研究了粉末冶金法制备泡沫铝材料的方法讨论了发泡过程中的保护方式、制坯压力、发泡温度等参数对泡沫铝体积质量、孔隙率、孔结构的影响，并对发泡机理进行了探讨增大制坯压力使得金属坯致密，可以得到孔结构均匀的泡沫铝材料；发泡温度是影响发泡的主要因素之一，发泡温度控制在高于铝或铝合金熔点，同时保持熔体具有一定粘度的范围内，能够得到孔结构均匀、高孔隙率的泡沫铝材料实验结果表明：采用熔盐保护方式，在300MPa的压力下，温度在675～680℃时，可得到孔径均匀、孔隙率高的泡沫铝材料。

The results show that the foamable MAA/MAN copolymers were prepared at 40-60℃ by polymerizing the mixture of 50phr MAA, 50phr MAN, 1-5phr magnesium oxide, 2-8phr butanol and tert-butanol, 0.2-0.3 phr dibenzoyl peroxide and tert-butyl perbenzoate and 0.1-0.2phr DMF. Then the resulting copolymers were expanded at 200-220℃ for 2-3h, subsequently treated at 160℃ for 5-6h, generating PMI foams with excellent mechanical properties and heat-resistance.

研究结果表明：将50份MAA、50份MAN、1~5份氧化镁、2~8份正丁醇、叔丁醇的混合物、0.2~0.3份过氧化二苯甲酰和过氧化苯甲酸叔丁酯和0.1~0.2份的甲酰胺，混合均匀后在40~60℃聚合为可发泡的MAA/MAN共聚物，该共聚物在200~220℃下发泡2~3h，在160℃下热处理5~6h，制得PMI泡沫塑料，其力学性能和耐热性能优异。

The cell structure refining mechanism shows that adding Mg decreases the surface tension of the aluminum alloy melt and hence to increase the bubble stabilization. Adding nuclear forming agent increases the nuclei of heterogeneous nucleation. Adding pre-heating foaming agent postpones its decomposition, hence to increase the uniform of foaming agent dispersion. Stirring within the middle stage of foaming agent rapid decomposition breaks up big bobbles to fine bobbles, hence to reduce mean cell diameter.

孔径细化机理分析表明，Mg的作用在于降低铝熔体的表面张力，提高气泡稳定性；形核剂的作用在于增加气泡非均匀形核的核心；发泡剂氧化预处理可以推迟和延缓发泡剂的分解，提高发泡剂的分散均匀性；搅拌发泡的作用是在发泡剂剧烈分解的中段，通过搅拌搅碎气泡，减小平均孔径。

Oh, I know that the music's fine like sparkling wine, go and have your fun.

哦，我知道音乐就像发泡的香槟一样美好，所以去度过你自己的愉快时光。

The absorption and distribution of chromium were studied in ryeusing nutrient culture technique and pot experiment.

采用不同浓度K2CrO4(0，0.4，0.8和1.2 mmol/L)的Hoagland营养液处理黑麦幼苗，测定铬在黑麦体内的亚细胞分布、铬化学形态及不同部位的积累。

By analyzing theory foundation of mathematical morphology in the digital image processing, researching morphology arithmetic of the binary Image, discussing two basic forms for the least structure element: dilation and erosion.

通过分析数学形态学在图像中的理论基础，研究二值图像的形态分析算法，探讨最小结构元素的两种基本形态：膨胀和腐蚀；分析了数学形态学复杂算法的基本原理，把数学形态学的部分并行处理理念引入到家实际应用中。