双工器

It supports full duplex mode and flexible parameters (baud rate, bits of data etc.).

支持全双工方式，灵活的以被收到的对文件，自动和人工的方式，自由的数据源，串行设备仿真模拟，插件，和嗅探器方式的数据被输出的参数的调整。

A full duplex MODEM can receive and transmit data at the same time.

一个全双工的调制解调器在相同时间能同时接收和发送数据。

TL084MJ Pinout: 3.3V Operation with 5V Tolerant Buffers ACPI 1.1, PC99/PC2001 Compliant LPC Interface with Clock Run Support Serial IRQ Interface Compatible with Serialized IRQ Support for PCI Systems 15 Direct IRQs Four 8-Bit DMA Channels ACPI SCI Interface nSMI Shadowed write only registers Internal 64K Flash ROM Programmed From Direct Parallel Interface, 8051, or LPC Host 2k-Byte Lockable Boot Block Can be Programmed Without 8051 Intervention Three Power Planes Low Standby Current in Sleep Mode Intelligent Auto Power Management for Super I/O ACPI Embedded Controller Interface Configuration Register Set Compatible with ISA Plug-and-Play Standard (Version 1.0a) High-Performance Embedded 8051 Keyboard and System Controller Provides System Power Management System Watch Dog Timer 8042 Style Host Interface Supports Interrupt and Polling Access 256 Bytes Data RAM On-Chip Memory-Mapped Control Registers Access to RTC and CMOS Registers Up to 16x8 Keyboard Scan Matrix Two 16 Bit Timer/Counters Integrated Full-Duplex Serial Port Interface Eleven 8051 Interrupt Sources Thirty-Two 8-Bit, Host/8051 Mailbox Registers Thirty-six Maskable Hardware Wake-Up Events Fast GATEA20

TL084MJ引脚说明： 3.3V工作电压为5V容错缓冲器的ACPI 1.1，PC99/PC2001符合LPC接口与时钟运行支持-兼容串行接口与串行的IRQ IRQ的支持PCI系统- 15直接的IRQ - 4个8位DMA通道- ACPI的SCI接口- nSMI -阴影只写寄存器内部的64K的Flash ROM -直接从程序并行接口，8051，还是LPC主机-的2K字节可锁定引导块-可在不干预程序8051三力飞机-低待机电流在休眠模式-智能型自动电源管理的超级I / O的ACPI嵌入式控制器接口配置寄存器设置兼容的ISA拆开的播放标准（版本1.0a）高性能嵌入式8051键盘和系统控制器-提供系统电源管理-系统监视狗定时器- 8042型主机接口-支持中断和轮询访问- 256字节数据RAM -片上存储器映射控制寄存器-获取实时时钟和CMOS寄存器-最多16x8矩阵键盘扫描- 2个16位定时器/计数器-综合全双工串行接口- 11个中断源8051 - 32个8位，Host/8051邮箱寄存器- 36个可屏蔽硬件唤醒事件-快速GATEA20

Taking advantage of the reciprocity of rotary field phase shifters and nonreciprocity of ferrite circle polarizers, high power duplexing rotary field phase phase shifters are designed.

利用旋转场移相器的互易特性和铁氧体圆极化器的非互易特性，设计出高功率双工旋转场移相器。

The connection converting apparatus includes: a hook detector for detecting a hooked state of the telephone; a relay for connecting the telephone to either the Internet or the PSTN according to a commmand; a duplex circuit for suppressing voice leakage and side tone by converting and reconverting from a two-line signal of the telephone to a four-line signal for transmission and reception; a tone decoder for decoding a DTMF tone of the telephone; and a microprocessor for exchanging control data for the user's computer, controlling the relay to cause the telephone to be connected to the Internet when the hook detector detects an off-the-hook state of the telephone, and providing number data to the user's computer when the microprocessor receives number data from the tone decoder.

所述连接转换装置包括：用于检测所述电话的摘机状态的摘机检测器；用于根据命令将所述电话连接到互联网或PSTN的转接器；用于通过从所述电话的双路信号到用来传送和接收的四路信号之间的转换及复原来抑制声音泄漏和侧音的双工电路；用于对所述电话的DTMF音进行解码的音频解码器；以及微处理器，其用于交换来自所述用户的计算机的控制数据、控制所述转接器以使所述电话在所述摘机检测器检测到所述电话的摘机状态时连接到互联网、以及在所述微处理器接收到来自所述音频解码器的号码数据时向所述用户的计算机提供号码数据。

Four 8-bit I/O Ports C Three 16-bit Timer/Counters C 256 Bytes Scratch Pad RAM C 8 Interrupt Sources with 4 Priority Levels C Dual Data Pointer Variable Length MOVX for Slow RAM/Peripherals High-speed Architecture C 10 to 40 MHz in Standard Mode 16K/32K Bytes On-Chip ROM Program T80C51RD2 ROMless Versions On-Chip 1024 bytes Expanded RAM C Software Selectable Size (0, 256, 512, 768, 1024 bytes) C 256 Bytes Selected at Reset for AT87C51RB2/RC2 Compatibility Keyboard Interrupt Interface on Port P1 8-bit Clock Prescaler 64K Program and Data Memory Spaces Improved X2 Mode with Independant Selection for CPU and Each Peripheral Programmable Counter Array 5 Channels with: C High-speed Output C Compare/Capture C Pulse Width Modulator C Watchdog Timer Capabilities Asynchronous Port Reset Full Duplex Enhanced UART Dedicated Baud Rate Generator for UART Low EMI Hardware Watchdog Timer (One-time Enabled with Reset-out) Power Control Modes C Idle Mode C Power-down Mode C Power-off Flag Power Supply: 2.7V to 5.5V or 2.7V to 3.6V Temperature Ranges: Commercial (0 to +70C) and Industrial (-40C to +85C) Packages: PDIL40, PLCC44, VQFP44

四8位I / O端口C款三16位定时器/计数器 256字节RAM的便笺簿 8中断源4优先级和C双数据指针MOVX在缓变长内存/外设高速架构为C 10至40 MHz的标准模式16K/32K字节的片上ROM程序T80C51RD2无ROM版本片1024字节扩展RAMC软件可选尺寸（0，256， 512，768，1024字节）C选取在重置为AT87C51RB2/RC2兼容键盘中断接口与独立的选择港口小一8位时钟分频器64K的程序和数据存储器空间的改进X2模式的CPU和256字节每个外设可编程计数器5通道的阵列：C型高速输出C比较/脉宽调制器捕获看门狗定时器复位功能异步端口全双工增强型UART的波特率发生器的UART低EMI硬件看门狗定时器电源控制模式空闲模式C掉电模式C断电旗电源：2.7V至5.5V或2.7V至3.6V温度范围：商业（0到+70 C）和工业（- 40C至+85℃）封装：PDIL40，PLCC44，VQFP44

Similar to other kind of communication systems, the radio frequency modular of RSU in DSRC include many parts such ad antenna, duplexer, low noise amplifier, local oscillator, mixer, filter, modulator, demodulator, and so on. It's difficult to analyze every part in the system fully, so the emphasis is mainly on the parts designed and implemented for the RSU by myself.

和其它通信系统类似，专用短程通信系统路边单元的射频部分包含天线、双工滤波器、低噪声放大器、混频器、本振、滤波器、调制解调器等多个功能模块，论文中要完整地介绍和分析每一个功能模块是困难的，因此本文主要介绍自己亲自完成的部分。

MAX1999EEI Pinout: 8- to 32-bit and 16- to 32-bit word packing options Programmable wait state options: 2 to 31 CCLK Digital audio interface includes six serial ports, two pre- cision clock generators, an input data port, three programmable timers and a signal routing unit Serial ports provide: Six dual data line serial ports that operate at up to 50 Mbits/s for a 200 MHz core on each data line each has a clock, frame sync, and two data lines that can be configured as either a receiver or transmitter pair Left-justified sample pair and I2S support, programmable direction for up to 24 simultaneous receive or transmit channels using two I2S compatible stereo devices per serial port TDM support for telecommunications interfaces including 128 TDM channel support for telephony interfaces such as H.100/H.110 Up to 12 TDM stream support, each with 128 channels per frame Companding selection on a per channel basis in TDM mode Input data port provides an additional input path to the DSP core configurable as either eight channels of I2S or serial data or as seven channels plus a single 20-bit wide syn- chronous parallel data acquisition port Supports receive audio channel data in I2S, left-justified sample pair, or right-justified mode Signal routing unit provides configurable and flexible connections between all DAI components, six serial ports, an input data port, two precision clock generators, three timers, 10 interrupts, six flag inputs, six flag outputs, and 20 SRU I/O pins Serial peripheral interface Master or slave serial boot through SPI Full-duplex operation Master-slave mode multimaster support Open drain outputs Programmable baud rates, clock polarities, and phases 3 Muxed Flag/IRQ lines 1 Muxed Flag/Timer expired line ROM based security features: JTAG access to memory permitted with a 64-bit key Protected memory regions that can be assigned to limit access under program control to sensitive code PLL has a wide variety of software and hardware multi- plier/divider ratios JTAG background telemetry for enhanced emulation features IEEE 1149.1 JTAG standard test access port and on-chip emulation Dual voltage: 3.3 V I/O, 1.2 V core Available in 136-ball BGA and 144-lead LQFP packages Lead free packages are also available

MAX1999EEI引脚说明： 8 - 32位和16 - 32位字包装选择可编程等待状态的选择：2至31个CCLK数字音频接口包括6个串行端口，两个前643时钟发生器，输入数据端口， 3可编程定时器和一个信号路由单元串行端口提供：六双串口数据线，在高达50 Mbps的操作/为200兆赫的每个数据行每个人都有一个时钟，帧同步的核心秒，和两个数据可以作为任何一个接收器或发射器对左对齐和I2S配对样本的支持下，最多可同时接收或传送24个频道，每使用两个系列的I2S兼容立体声设备配置可编程方向线；港口的TDM通信接口，包括支持128个电话接口的TDM的渠道，如H.100/H.110支持多达12个的TDM流的支持下，每帧128个频道每个压缩扩展每通道的基础上选择在TDM模式输入数据端口提供了一个额外的输入路径的DSP核心配置为I2S或串行数据或7加一个20位宽的SYN -异步的并行数据采集接口通道或8通道；支持接收通道I2S音频数据，左对齐样本对，或右对齐模式信号路由单元组件之间提供所有戴配置和灵活的连接，6个串行端口，一个输入数据端口，两个精密时钟发生器，3个定时器，10个中断，六旗投入，产出6个旗，20曼谷南南区域股的I / O管脚串行外设接口的硕士或奴隶通过SPI串行启动全双工运作主从模式多主机支持开漏输出可编程波特率，时钟极性和第三期合并调制旗/ IRQ线路1合并调制旗/定时器过期线光盘的防伪特征：JTAG的访问与64位受保护的关键允许内存内存可分配给程序访问控制的限制下对敏感地区有一个代码锁相环/遥测分比率为背景的JTAG仿真功能增强的IEEE 1149.1 JTAG标准测试访问端口的软件和硬件多钳各种各样和片上仿真双电压：3.3六/输出，可在1.2 V核心136球BGA封装和144引脚LQFP封装无铅封装，也可

TDA4864 Pinout: 8- to 32-bit and 16- to 32-bit word packing options Programmable wait state options: 2 to 31 CCLK Digital audio interface includes six serial ports, two pre- cision clock generators, an input data port, three programmable timers and a signal routing unit Serial ports provide: Six dual data line serial ports that operate at up to 50 Mbits/s for a 200 MHz core on each data line each has a clock, frame sync, and two data lines that can be configured as either a receiver or transmitter pair Left-justified sample pair and I2S support, programmable direction for up to 24 simultaneous receive or transmit channels using two I2S compatible stereo devices per serial port TDM support for telecommunications interfaces including 128 TDM channel support for telephony interfaces such as H.100/H.110 Up to 12 TDM stream support, each with 128 channels per frame Companding selection on a per channel basis in TDM mode Input data port provides an additional input path to the DSP core configurable as either eight channels of I2S or serial data or as seven channels plus a single 20-bit wide syn- chronous parallel data acquisition port Supports receive audio channel data in I2S, left-justified sample pair, or right-justified mode Signal routing unit provides configurable and flexible connections between all DAI components, six serial ports, an input data port, two precision clock generators, three timers, 10 interrupts, six flag inputs, six flag outputs, and 20 SRU I/O pins Serial peripheral interface Master or slave serial boot through SPI Full-duplex operation Master-slave mode multimaster support Open drain outputs Programmable baud rates, clock polarities, and phases 3 Muxed Flag/IRQ lines 1 Muxed Flag/Timer expired line ROM based security features: JTAG access to memory permitted with a 64-bit key Protected memory regions that can be assigned to limit access under program control to sensitive code PLL has a wide variety of software and hardware multi- plier/divider ratios JTAG background telemetry for enhanced emulation features IEEE 1149.1 JTAG standard test access port and on-chip emulation Dual voltage: 3.3 V I/O, 1.2 V core Available in 136-ball BGA and 144-lead LQFP packages Lead free packages are also available

TDA4864引脚说明： 8 - 32位和16 - 32位字包装选择可编程等待状态的选择：2至31个CCLK数字音频接口包括6个串行端口，两个前643时钟发生器，输入数据端口， 3可编程定时器和一个信号路由单元串行端口提供：六双串口数据线，在高达50 Mbps的操作/为200兆赫的每个数据行每个人都有一个时钟，帧同步的核心秒，和两个数据可以作为任何一个接收器或发射器对左对齐和I2S样本对支持，最多可同时接收或传送24个频道，每使用两个系列的I2S兼容立体声设备配置可编程方向线；港口的TDM通信接口，包括支持128个电话接口的TDM的渠道，如H.100/H.110支持多达12个的TDM流的支持下，每帧128个频道每个压缩扩展每通道的基础上选择在TDM模式输入数据端口提供了一个额外的输入路径的DSP核心配置为I2S或串行数据或7加一个20位宽的SYN -异步的并行数据采集接口通道或8通道；支持接收通道I2S音频数据，左对齐样本对，或右对齐模式信号路由单元组件之间提供所有戴配置和灵活的连接，6个串行端口，一个输入数据端口，两个精密时钟发生器，3个定时器，10个中断，六旗投入，产出6个旗，20曼谷南南区域股的I / O管脚串行外设接口的硕士或奴隶通过SPI串行启动全双工运作主从模式多主机支持开漏输出可编程波特率，时钟极性和第三期合并调制旗/ IRQ线路1合并调制旗/定时器过期线光盘的防伪特征：JTAG的访问与64位受保护的关键允许内存内存可分配给程序访问控制的限制下对敏感地区有一个代码锁相环/分比率背景遥测的JTAG仿真功能增强的IEEE 1149.1 JTAG标准测试访问端口软件和硬件多钳各种各样和片上仿真双电压：3.3六/输出，可在1.2 V核心136球BGA封装和144引脚LQFP封装无铅封装，也可

The purpose of this paper is to extract the coupling matrix of generalized chebyshev filter, model the four-port rectangular junctions, multiple-stepped rectangular waveguide bend and T-septum rectangular waveguide junction by full-wave methods and design generalized chebyshev filters and diplexers. The main works are as follows: 1. Systematically research on the theory of generalized chebyshev filters The generalized chebyshev filters are based on the all-coupled model.

本文主要目的是研究广义切比雪夫滤波器拓扑结构、物理结构上可实现的耦合矩阵提取及其特性分析和基于模式匹配法全波建模四口矩形结、多阶梯矩形波导弯头、T—scptum矩形波导接头，最后，设计了一系列高性能的滤波器和双工器。

However, as the name（read－only memory）implies, CD disks cannot be written onorchanged in any way.

然而，正如其名字所指出的那样，CD盘不能写，也不能用任何方式改变其内容。

Galvanizes steel pallet is mainly export which suits standard packing of European Union, the North America. galvanizes steel pallet is suitable to heavy rack. Pallet surface can design plate type, corrugated and the gap form, satisfies the different requirements.

镀锌钢托盘多用于出口，替代木托盘，免薰蒸，符合欧盟、北美各国对出口货物包装材料的法令要求；喷涂钢托盘适用于重载上货架之用，托盘表面根据需要制作成平板状、波纹状及间隔形式，满足不同的使用要求。