压料
- 与 压料 相关的网络例句 [注:此内容来源于网络,仅供参考]
-
Calcium lignosulphonate would reduce drying shrinkage, the influence of superplasticizer on drying shrinkage is related strongly to the water cement ratio of mortar. When the water cement ratio is lower (0.3 or 0.4), superplasticizer would increase drying shrinkage, which increases with water cement ratio decrease.
本论文采用固定砂浆中单位体积用水量、浆体体积含量和骨料量的方法,研究了化学外加剂和矿物掺合料对砂浆干缩性能的影响,并通过微观分析和压汞测孔的方法探讨了其对干缩性能影响的机理。
-
Dielectric, piezoelectric and electrmechanical coupling properties of PZT and PSZT systems at high Zr content region were studied. The feature of high Kt and low Kp of PZT-based materials near F-AF phase boundary was exploited and examined, and electromachanical coupling anisotropy Kt/Kp is higher than that at the morphotropic phase boundary , Kt≥0.40, Kt/Kp≥3. 0. This phenomenon can be realized by electric field -induced AF-F phase transition and explained by coupling effect of two-sublattice in antiferroelectric unit cell.
研究了PZT和PSZT两个系统在高锆区的介电、压电和机电耦合等性能,首次发现了PZT基材料在铁电-反铁电相界处具有高Kt和低Kp的性质,机电耦合各向异性Kt/Kp也比准同型相界要高,Kt≥0.40,Kt/Kp≥3.0,并把这一现象归因于电场诱导AF-F相变和反铁电双子晶格间的强耦合作用。
-
The effects of BN content on the thermal conductivity, hardness and microstructure of AlN-BN composite ceramics prepared by ceramic injection molding and pressureless sintering, as well as the rheological characteristics of the mixtures were discussed.
采用粉末注射成形和无压烧结相结合的工艺制备AlN-BN复相陶瓷,讨论了AlN-BN混合料的流变性能以及BN含量对复相陶瓷热导率、硬度以及显微组织的影响。
-
Our main production SBR diving material, EVA Cai Sepian, high-elastic EVA, back of plastic, embossed SBR, posted a foundry, another earthquake activity insoles-oil plant.
本厂主要生产SBR潜水料、EVA彩色片、高弹EVA、回力胶、压纹SBR、代工贴合、另设活动鞋垫防震油包厂。
-
SLD series bin container Lifter is mainly used in pharmaceutical industry for transferring and charging powder and granules. It can be used along with various main equipments, such as container blender, Tabler press, capsule filling machine and so on. It optimizes production-flow, avoid the dust and cross-contamination. It's the ideal transfer equipment in pharmaceutical industry for solid dosage section. Meanwhile, it can be also widely used in chemical industry, food-stuff industry, etc.
SLD 系列料斗提升上料机主要用于制药企业的粉状、颗粒状等固体物料的输送加料,可与混合机、制粒机、压片机、包衣机、胶囊填充机及包装机等工艺设备配套,能有效地减少交叉污染与粉尘,减轻了劳动强度,且物料不分层,是制药厂理想的物料输送设备,同时在化工、轻工食品等行业亦可广泛使用。
-
The Stacker-reclaimer system has the tanglesome steel frame structure, therefore the guarantee the anti- pulled and anti- pressed intensity of the structure and the equipment distortion is precondition to improve on the structure of the equipment .
堆取料机系统具有结构复杂、旋转半径大的大型钢架结构设备,因此保证结构的抗拉压强度和设备整体绕度是改进设备的结构性能的前提。
-
A fter autoclaved at 150 ℃ for 24 h, the mortars with zeolitization perlite aggre gates are cured at 80 ℃ for 20 months.
含沸石化珍珠岩活性集料砂浆,在150 ℃压蒸24 h后,置于80 ℃养护至20 个月。
-
Then, attention will be focused on the understanding of how the feeding device influences the quality of compacts.
文中将注意力集中在了解喂料装置是如何影响压实质量的。
-
The degassed liquid materials can be fed continuously. Therefore, half data of a phase diagram can be determined in a single round of experiment.
采用了液体物料集中脱气、液相转移物料、连续进料、以数字式精密压力计测量溶液总蒸汽压的实验方法,每次实验可完成二分之一全浓度范围的测定工作。
-
Three types of base asphalt and six SBS were used to produce SBS modified asphalt. The interaction of SBS modified asphalt was discussed in different states between the base asphalt and SBS based on their compositions. Through the traditional tests, such as penetration, soften point and ductility, and US SHRP tests, the results indicated that influences to affect the temperature susceptibility, high and low temperature performance, aging characteristics are base asphalt, SBS types and their dosages. The functions of penetration to viscosity and complex shear modulus G~* to complex dynamic shear viscosity η~* were set up, and then theviscosity-temperature susceptibility of wide temperature span and the calculation method of low temperature viscosity were obtained."Process" evaluation criterions, high grading critical temperature T_ and low grading criticaltemperature T_ , were suggested according to the high and low temperatureperformances of SBS modified asphalt. Using the experience of Repeated Creep and Recovery Test for Binders, a new high-temperature evaluation index,modification rutting factor G~*~(-9) was obtained. The results after RTFO and PAV aging indicated that traditional tests didnt differentiate base asphalt and SBS modified asphalt, but dynamic mechanics temperature spectrum and G*-5 black chart clearly reflected the influence of aging to the SBS modified asphalt. With the IR and GPC tests, the reason of aging to the SBS modified asphalt were due to asphalt phase oxygenated and SBS phase depredated.
论文选择3种油源的基质沥青和6种SBS改性剂制备改性沥青,通过分析基质沥青和SBS改性剂的组成结构特点,得出了不同状态下SBS改性沥青的SBS与基质沥青的相互作用机理;通过针入度、软化点、延度等常规试验以及美国SHRP试验,分析了基质沥青、SBS改性剂类型与剂量对SBS改性沥青的温度敏感性、高低温特性及老化特性的影响;建立了针入度-粘度、复数模量G~*-复数粘度η~*的换算关系,得出了宽温度域的粘温指数VTS和较低温度下粘度的计算方法;通过高低温性能分析提出了&过程&评价参数高温等级温度T_和低温等级温度T_;借鉴重复恢复与蠕变试验研究成果,得到了SBS改性沥青高温评价指标改进型抗车辙因子G~*~(-9);RTFO和PAV老化后的性能试验结果表明,常规试验难以区分SBS改性沥青与基质沥青的差异,而动态力学温度谱、G~*-δ黑斑图可以反映老化作用对SBS改性沥青的影响,且通过IR试验和GPC试验得出SBS改性沥青老化是沥青相的氧化和SBS的降解共同引起的;通过不同温度下SBS改性沥青混合料的旋转压实SGC试验,根据粘度与剪变率的关系,提出用剪变率60(1/s)测试SBS改性沥青的粘温曲线,并按照0.17±0.02Pa.s和0.28±0.03Pa.s确定施工温度。
- 推荐网络例句
-
The medicinal plant resources of Gentianaceae in Sichuan Province.
四川省龙胆科药用植物资源。
-
"Some fortuneteller," scoffed the man, I'm the father of THREE children.
" "一些算命",嘲笑他,"我的父亲有三个孩子。
-
There are over 90 universities and above 150 institutes to provide Bachelor or above.
英国现有90多所大学和150多所提供本科以上课程的学院。