剪切强度

Under these conditions the adhesive showed good adhesive property and the shear strengths of felted polypropylene and adhered steel materiafreached 3.4MPa and 7.7Mpa respectively.

在此条件下制备的共聚物粘接聚丙烯材料和钢的剪切强度分别达3.4 MPa和7.7 MPa。

Many factors, such as the content of the hydrotropic cationic polymer, pre-drying temperature and drying time could influence the degree of the migration of the latex binder.

并通过纸页层间剪切强度、滤纸的扫描电子显微镜图像等对处理后的滤纸热迁移程度与增强后的纸页各项性能进行了表征。

Reinforced Earth is, therefore, a composite material, combining the compressive and shear strength of compacted granular fill with the tensile strength of horizontal, inextensible reinforcements.

因此，加筋土是一种复合材料，它将经碾压的粗粒回填土的压缩性和剪切强度与横向无伸展性的加固材料的抗拉强度相结合。

But fiber/matrix interfacial adhesion is poor, which results in the lower interlaminar shear strength in composites.

但F-12与环氧树脂基体之间的界面粘结性能较差，复合材料的层间剪切强度较低。

The interlaminar shear strength of materials is 27MPa, which is enhanced by the fibers vertical to layers.

材料的层间剪切强度为27MPa，垂直无纬布和胎网铺层的纤维束避免了材料的层间开裂现象。

A tentative suggestion that the tensile strength of the resin will be a limitation to the interlaminar shear stre...

提出了树脂的抗张强度是树脂基单向长纤维复合材料的层间剪切强度的极限的初步设想。

In the range of incident velocities near to the perforation limit ve-locity( V50), this mechanism depends on thickness and interlaminar shear strength of composite plate.

在接近穿孔极限速度的入射速度(V50)范围内，这一机制依赖于复合材料板的厚度和中间层剪切强度。

The interlaminar shear strength of the composites, filled with one of the above-mentioned materials as a constituent is investigated.

将以上几种多壁碳纳米管加入到玻璃纤维增强复合材料中，并分别测量其层间剪切强度。

The impregnation and interlaminar shear strength of PET/epoxy composites with untreated and treated fibers are compared in order to study the effect of plasma treatment on the surface properties of PET.

通过比较处理前后浸润性、涤纶纤维/环氧复合材料的层间剪切强度，研究了冷等离子处理对涤纶纤维表面性质的影响。

According to modifying effect of magnetic field to resin, through modification of FRP pultrusion process and equipments, this dissertation developed FRP rebar magnetism curing pultrusion process, studied the effect of fabrication magnetic field intensity on mechanical performances of fabricated GFRP rebar, and confined the optimal intensity of curing magnetic field. Through durability contrast test of GFRP rebars fabricated with optimal curing magnetism intensity and without magnetic field in 80℃water, according to water-absorbing capacity and interlaminate shear strength, the effect of magnetism curing on the durability performance of GFRP rebar was studied.

根据磁场对树脂的改性作用，对FRP拉挤成型工艺设备进行改进，研究开发了FRP筋磁场固化拉挤工艺；研究了成型磁场强度对成型后GFRP筋力学性能的影响，确定了最佳磁场强度；对最佳磁场强度成型和无磁场成型GFRP筋进行80℃水中的耐久性对比试验，以吸水率和层间剪切强度为指标，研究了磁场固化工艺对GFRP筋耐久性的影响。

As she looked at Warrington's manly face, and dark, melancholy eyes, she had settled in her mind that he must have been the victim of an unhappy attachment.

每逢看到沃林顿那刚毅的脸，那乌黑、忧郁的眼睛，她便会相信，他一定作过不幸的爱情的受害者。

Maybe they'll disappear into a pothole.

也许他们将在壶穴里消失